[Users] need help progressing from newb status.

[Daniel-Constantin Mierla]

Hello,

On 07/05/06 08:37, Marc Rys wrote:
>
> Hello all.  Over the last week, I’ve installed OpenSER on my Debian 
> Sarge box with some degree of success.  I’ve succeeded adding users to 
> OpenSER, and I’ve stumbled my way through the openserctl commands to 
> add my VOIP capable Ascend Max as a digital PSTN gateway.  At this 
> point I can only get PSTN calls to terminate from the PSTN to my 
> un-NAT’d VOIP UA’s(grandstream HT-486’s).  I’m still on my search to 
> find the proper openserctl command to route all PSTN calls out my 
> gateway.  (any help here would be appreciated)
>
>  
>
> Also, could somebody point me in the right direction on where to find 
> complete documentation on how to setup mediaproxy on OpenSER?  I’ve 
> followed the install instructions included with 
> mediaproxy-1.7.2.tar.gz. but when I I attempt to start mediaproxy I 
> get the following error….
>
>  
>
> sipproxy1:~# /etc/init.d/mediaproxy start
>
> Starting SER MediaProxy server: mediaproxy/usr/bin/env: python: No 
> such file or directory
>
> /usr/bin/env: python: No such file or directory
>

never used media proxy, but from the error I guess that you do not have 
python installed on your system. Alternative solution to NAT traversal 
is nathelper and rtpproxy. See http://voip-info.org/wiki/view/OpenSER, 
the section about OpenSER and NAT, some basic config files are posted there.

Cheers,
Daniel

>  
>
> My main goal is to get these HT486’s further out on the Internet and 
> of course behind some kind of NAT device.
>
>  
>
> Thanks in advance for your help.
>
> Marc
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.8/381 - Release Date: 7/3/2006
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>