[Users] Question concerning nathelper and rtpproxy
Wolfgang Hottgenroth
woho at hottis.de
Wed Jan 25 13:27:56 CET 2006
I'm sorry, I've asked to quick. It's force_rtp_proxy("r") which I need
to use. Now it seems to work for me.
Thanks,
Wolfgang
Wolfgang Hottgenroth wrote:
> Hi,
>
>
> I'm trying to get nathelper and rtpproxy to work, following the guide
> found on onsip.org, but unfortunately, it does not work correctly for.
> Don't know why.
>
> My setup is the following:
>
>
> SIP-Phone (170.127.120.189) -> Proxy1 (62.191.185.30) -> Proxy2
> (62.191.185.147) -> PSTN-GW (139.4.200.6)
>
> Proxy1 supports authentication and handles the NAT travseral stuff.
> Since in the current testbed, SIP-Phone is not actual behind a NAT
> device I bypassed the test in the openser configuration to recognize
> this phone as "nated".
>
> What I see is, for a not nated phone, that the signaling goes the chain
> as drawn above and the media stream goes from the phone to the ngw and
> vice-versa, as I've expected. Everything is fine in this case.
>
> For a nated phone, the signaling again goes through the chain, but the
> media stream from the phone goes to the rtpproxy on Proxy1, which tries
> to send it to Proxy2, where no rtpproxy is running, and thereby an "ICMP
> port unreachable" is returned (which actual does prevent the rtpproxy
> from continously sending the media stream).
>
> Digging into the SIP and SDP is see the following:
>
> SIP-Phone sends an INVITE to Proxy1, in the SDP it has "Connection
> Information: 170.127.120.189" (IP of the phone)
>
> Proxy1 replies with "100 Trying" and sends the INVITE to Proxy2, in the
> SDP it has now "Connection Information: 62.191.185.30" (IP of Proxy1),
> as I've expected.
>
> Proxy2 replied with "100 Trying" and sends the INVITE to the ngw, in the
> SDP it still has "Connection Information: 62.191.185.30".
>
> Now the ngw sends "183 Session Progress" to Proxy2, which has in the SDP
> "Connection Information: 139.4.200.6" (IP of the ngw).
>
> Proxy2 sends "183 Session Progress" to Proxy1, still with "Connection
> Information: 139.4.200.6" in the SDP.
>
> Finally Proxy1 sends "183 Session Progress" to the phone, now with
> "Connection Information: 62.191.185.30" (IP of Proxy1) in the SDP, as
> I've expected, since the phone should send the media stream through the
> rtpproxy running on Proxy1.
>
> The phone sends the media stream as expected to Proxy1.
>
> But, and this is the problem, the rtpproxy sends the media stream not to
> the ngw, as I've expected looking into "SDP Connection Information"
> received by this box, but to Proxy2, which never was mentioned in a
> Connection Information.
>
> When starting rtpproxy with -f, I saw the it was asked by
> openser/nathelper to proxy between the phone and Proxy2, so the rtpproxy
> seems to work correctly. But why asks the nathelper on Proxy1 to proxy
> the media between the phone and Proxy2 and not, as I've expected between
> the phone and the ngw?
>
> My openser configuration is attached, if someone would be so nice to
> have a look and send a hint for me.
>
>
> Thanks,
> Wolfgang
>
>
>
>
> ------------------------------------------------------------------------
>
> #
> # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
> #
> # ----------- global configuration parameters ------------------------
>
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=yes # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/openser_fifo"
>
>
> # ------------------ module loading ----------------------------------
>
>
> loadmodule "/opt/openser/lib/openser/modules/sl.so"
> loadmodule "/opt/openser/lib/openser/modules/tm.so"
> loadmodule "/opt/openser/lib/openser/modules/rr.so"
> loadmodule "/opt/openser/lib/openser/modules/maxfwd.so"
> loadmodule "/opt/openser/lib/openser/modules/usrloc.so"
> loadmodule "/opt/openser/lib/openser/modules/registrar.so"
> loadmodule "/opt/openser/lib/openser/modules/textops.so"
>
> loadmodule "/opt/openser/lib/openser/modules/auth.so"
> loadmodule "/opt/openser/lib/openser/modules/auth_radius.so"
>
> loadmodule "/opt/openser/lib/openser/modules/xlog.so"
>
> loadmodule "/opt/openser/lib/openser/modules/nathelper.so"
> loadmodule "/opt/openser/lib/openser/modules/uri.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 0)
>
> #modparam("rr", "enable_full_lr", 1)
>
> modparam("xlog", "buf_size", 8192)
>
> modparam("auth_radius", "radius_config", "/opt/openser/etc/openser/radiusclient.conf")
> modparam("auth", "rpid_prefix", "<sip:")
> modparam("auth", "rpid_suffix", "@62.191.185.30>;screen=yes;privacy=off")
> modparam("auth", "rpid_avp", "rpid")
>
> modparam("registrar", "nat_flag", 6)
>
> modparam("nathelper", "natping_interval", 30)
> modparam("nathelper", "ping_nated_only", 1)
> modparam("nathelper", "rtpproxy_sock", "unix:/opt/rtpproxy/sock/rtpproxy.sock")
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
>
> route{
> xlog("L_NOTICE", "REQUEST: $rm, $ru, $si\n");
>
> if (method != "REGISTER") {
> record_route();
> }
>
> if (method == "BYE" || method == "CANCEL") {
> unforce_rtp_proxy();
> }
>
> if (src_ip == "170.127.120.189") {
> xlog("L_NOTICE", "*** FOUND THAT PHONE\n");
> setflag(6);
> force_rport();
> }
>
> if (loose_route()) {
> xlog("L_NOTICE", "*** loose routing enforced\n");
>
> if (has_totag() && (method == "INVITE" || method == "ACK")) {
> if (nat_uac_test("3")) {
> xlog("L_NOTICE", "*** found NAT (1) !\n");
> setflag(6);
> force_rport();
> fix_nated_contact();
> }
> force_rtp_proxy("l");
> }
> route(1);
> return;
> }
>
> if (uri != myself) {
> xlog("L_NOTICE", "*** uri != myself\n");
> sl_send_reply("483", "will not handle this");
> return;
> }
>
> if (method == "CANCEL") {
> xlog("L_NOTICE", "*** cancel\n");
> route(1);
> return;
> } else if (method == "INVITE") {
> xlog("L_NOTICE", "*** invite\n");
> route(3);
> return;
> } else if (method == "REGISTER") {
> xlog("L_NOTICE", "*** register\n");
> route(2);
> return;
> }
>
> xlog("L_NOTICE", "*** at the end: $rm\n");
> route(1);
> return;
> }
>
> route[1] {
> t_on_reply("1");
>
> if (!t_relay()) {
> if (method == "INVITE" && isflagset(6)) {
> unforce_rtp_proxy();
> };
> sl_reply_error();
> }
> }
>
> route[2] {
> if (!search("^Contact: [ ]*\*") && nat_uac_test("3")) {
> xlog("L_NOTICE", "*** found NAT (2) !\n");
> if (nat_uac_test("1")) {
> xlog("L_NOTICE", " --> 1\n");
> }
> if (nat_uac_test("2")) {
> xlog("L_NOTICE", " --> 2\n");
> }
> setflag(6);
> fix_nated_register();
> force_rport();
> }
>
> if (! radius_www_authorize("uu.net")) {
> www_challenge("uu.net", "0");
> return;
> }
>
> consume_credentials();
>
> if (!save("location")) {
> sl_reply_error();
> }
>
> return;
> }
>
> route[3] {
> if (src_ip == "62.191.185.147") {
> xlog("L_NOTICE", "*** from upstream proxy\n");
> if (uri =~ "^sip:99") {
> xlog("L_NOTICE", "*** outbreak prefix from outside, reject\n");
> sl_send_reply("484", "no pstn outbreak for you");
> return;
> }
> } else {
> if (! radius_www_authorize("uu.net")) {
> www_challenge("uu.net", "0");
> return;
> };
>
> consume_credentials();
>
> if (nat_uac_test("3")) {
> xlog("L_NOTICE", "*** found NAT (3) !\n");
> setflag(6);
> }
>
> append_rpid_hf();
>
> if (uri=~"^sip:99") {
> xlog("L_NOTICE", "*** pstn outbreak call, uri: $ru\n");
> strip(2);
> xlog("L_NOTICE", "*** stripped uri: $ru\n");
> if (uri=~"^sip:[1-9]") {
> xlog("L_NOTICE", "*** local call\n");
> prefix("+49231");
> } else if (uri=~"^sip:0[1-9]") {
> xlog("L_NOTICE", "*** national call\n");
> strip(1);
> prefix("+49");
> } else if (uri=~"^sip:00[1-9]") {
> xlog("L_NOTICE", "*** international call\n");
> strip(2);
> prefix("+");
> } else {
> xlog("L_NOTICE", "*** something wrong\n");
> sl_send_reply("488", "wrong telephone number");
> return;
> }
>
> rewritehostport("62.191.185.147:5060");
> route(4);
> route(1);
> return;
> }
> }
>
> xlog("L_NOTICE", "*** looking up ...\n");
> if (!lookup("location")) {
> xlog("L_NOTICE", " --> not found\n");
> sl_send_reply("404", "Not Found");
> return;
> }
> xlog("L_NOTICE", " --> found\n");
>
> route(4);
> route(1);
> return;
> }
>
> route[4] {
> if (isflagset(6)) {
> xlog("L_NOTICE", "*** handle NAT (1)\n");
> force_rport();
> fix_nated_contact();
> force_rtp_proxy();
> }
> return;
> }
>
> onreply_route[1] {
> xlog("L_NOTICE", "*** onreply_route\n");
> if (isflagset(6) && status =~ "(180)|(183)|2[0-9][0-9]") {
> if (! search("^Content-Length:[ ]*0")) {
> xlog("L_NOTICE", "*** handle NAT (2)\n");
> force_rtp_proxy();
> }
> }
>
> if (nat_uac_test("1")) {
> fix_nated_contact();
> xlog("L_NOTICE", "*** handle NAT (3)\n");
> }
>
> return;
> }
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
More information about the sr-users
mailing list