[Serusers] serweb
Ofer Zaarur
ozaarur at gmail.com
Tue Feb 21 15:33:08 CET 2006
I changed the http.conf, and I redump all the serweb files without any
change to : /var/www/html/serweb/.
So the URL should be: http://192.168.1.45/serweb/html/admin/index.php
still getting:
-----------------------------------------------
Not Found
The requested URL /serweb/html/admin/index.php was not found on this
server.
________________________________________________________________________
Apache/2.0.54 (Fedora) Server at 192.168.1.45 Port 80
-----------------------------------------------------------
do I miss something? are there any in between test that I can verify the
problem?
thanks,
Ofer
On Tue, 2006-02-21 at 08:27 +0100, Karel Kozlik wrote:
> Hi,
> there is en error in your httpd.conf.
>
> This line:
> Alias /serweb/ "/var/www/html/serweb/html"
>
> should be:
> Alias /serweb "/var/www/html/serweb/html"
>
>
> And the URL of serweb is:
> http://your.host/serweb/admin/index.php
>
>
> Also you should leave unchanged $config->root_path in config_paths.php.
> It should be:
> $config->root_path="/serweb/";
>
> It is the part of URL after "http://your.host". Not path on your filesystem.
>
> regards Karel
>
>
> Ofer Zaarur napsal(a):
> > Hi,
> >
> > I'm Newbie with ser. I have ser server works fine on my local network.
> > I tried to setup serweb without success serweb9.4.
> > I'm getting
> > ----------------------------------------
> > Not Found
> > The requested URL /serweb/html/admin/index.php was not found on this
> > server.
> >
> >
> > ________________________________________________________________________
> > Apache/2.0.54 (Fedora) Server at 192.168.1.45 Port 80 fedoratest page
> > all the time.
> > ---------------------------------------
> >
> > I follow the installation but still doesn't work. is there any guide to
> > help me setup the serweb?
> > is someone has any idea?
> >
> >
> > Thanks,
> > Ofer
> >
> > P.S. i'm using php 5.0.4
> > mysql 4.1.11
> >
> > attache are the modified files:
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > #
> > # Based upon the NCSA server configuration files originally by Rob McCool.
> > #
> > # This is the main Apache server configuration file. It contains the
> > # configuration directives that give the server its instructions.
> > # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
> > # the directives.
> > #
> > # Do NOT simply read the instructions in here without understanding
> > # what they do. They're here only as hints or reminders. If you are unsure
> > # consult the online docs. You have been warned.
> > #
> > # The configuration directives are grouped into three basic sections:
> > # 1. Directives that control the operation of the Apache server process as a
> > # whole (the 'global environment').
> > # 2. Directives that define the parameters of the 'main' or 'default' server,
> > # which responds to requests that aren't handled by a virtual host.
> > # These directives also provide default values for the settings
> > # of all virtual hosts.
> > # 3. Settings for virtual hosts, which allow Web requests to be sent to
> > # different IP addresses or hostnames and have them handled by the
> > # same Apache server process.
> > #
> > # Configuration and logfile names: If the filenames you specify for many
> > # of the server's control files begin with "/" (or "drive:/" for Win32), the
> > # server will use that explicit path. If the filenames do *not* begin
> > # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> > # with ServerRoot set to "/etc/httpd" will be interpreted by the
> > # server as "/etc/httpd/logs/foo.log".
> > #
> >
> > ### Section 1: Global Environment
> > #
> > # The directives in this section affect the overall operation of Apache,
> > # such as the number of concurrent requests it can handle or where it
> > # can find its configuration files.
> > #
> >
> > #
> > # Don't give away too much information about all the subcomponents
> > # we are running. Comment out this line if you don't mind remote sites
> > # finding out what major optional modules you are running
> > ServerTokens OS
> >
> > #
> > # ServerRoot: The top of the directory tree under which the server's
> > # configuration, error, and log files are kept.
> > #
> > # NOTE! If you intend to place this on an NFS (or otherwise network)
> > # mounted filesystem then please read the LockFile documentation
> > # (available at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
> > # you will save yourself a lot of trouble.
> > #
> > # Do NOT add a slash at the end of the directory path.
> > #
> > ServerRoot "/etc/httpd"
> >
> > #
> > # PidFile: The file in which the server should record its process
> > # identification number when it starts.
> > #
> > PidFile run/httpd.pid
> >
> > #
> > # Timeout: The number of seconds before receives and sends time out.
> > #
> > Timeout 120
> >
> > #
> > # KeepAlive: Whether or not to allow persistent connections (more than
> > # one request per connection). Set to "Off" to deactivate.
> > #
> > KeepAlive Off
> >
> > #
> > # MaxKeepAliveRequests: The maximum number of requests to allow
> > # during a persistent connection. Set to 0 to allow an unlimited amount.
> > # We recommend you leave this number high, for maximum performance.
> > #
> > MaxKeepAliveRequests 100
> >
> > #
> > # KeepAliveTimeout: Number of seconds to wait for the next request from the
> > # same client on the same connection.
> > #
> > KeepAliveTimeout 15
> >
> > ##
> > ## Server-Pool Size Regulation (MPM specific)
> > ##
> >
> > # prefork MPM
> > # StartServers: number of server processes to start
> > # MinSpareServers: minimum number of server processes which are kept spare
> > # MaxSpareServers: maximum number of server processes which are kept spare
> > # ServerLimit: maximum value for MaxClients for the lifetime of the server
> > # MaxClients: maximum number of server processes allowed to start
> > # MaxRequestsPerChild: maximum number of requests a server process serves
> > <IfModule prefork.c>
> > StartServers 8
> > MinSpareServers 5
> > MaxSpareServers 20
> > ServerLimit 256
> > MaxClients 256
> > MaxRequestsPerChild 4000
> > </IfModule>
> >
> > # worker MPM
> > # StartServers: initial number of server processes to start
> > # MaxClients: maximum number of simultaneous client connections
> > # MinSpareThreads: minimum number of worker threads which are kept spare
> > # MaxSpareThreads: maximum number of worker threads which are kept spare
> > # ThreadsPerChild: constant number of worker threads in each server process
> > # MaxRequestsPerChild: maximum number of requests a server process serves
> > <IfModule worker.c>
> > StartServers 2
> > MaxClients 150
> > MinSpareThreads 25
> > MaxSpareThreads 75
> > ThreadsPerChild 25
> > MaxRequestsPerChild 0
> > </IfModule>
> >
> > #
> > # Listen: Allows you to bind Apache to specific IP addresses and/or
> > # ports, in addition to the default. See also the <VirtualHost>
> > # directive.
> > #
> > # Change this to Listen on specific IP addresses as shown below to
> > # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
> > #
> > #Listen 12.34.56.78:80
> > Listen 80
> >
> > #
> > # Dynamic Shared Object (DSO) Support
> > #
> > # To be able to use the functionality of a module which was built as a DSO you
> > # have to place corresponding `LoadModule' lines at this location so the
> > # directives contained in it are actually available _before_ they are used.
> > # Statically compiled modules (those listed by `httpd -l') do not need
> > # to be loaded here.
> > #
> > # Example:
> > # LoadModule foo_module modules/mod_foo.so
> > #
> > LoadModule access_module modules/mod_access.so
> > LoadModule auth_module modules/mod_auth.so
> > LoadModule auth_anon_module modules/mod_auth_anon.so
> > LoadModule auth_dbm_module modules/mod_auth_dbm.so
> > LoadModule auth_digest_module modules/mod_auth_digest.so
> > LoadModule ldap_module modules/mod_ldap.so
> > LoadModule auth_ldap_module modules/mod_auth_ldap.so
> > LoadModule include_module modules/mod_include.so
> > LoadModule log_config_module modules/mod_log_config.so
> > LoadModule logio_module modules/mod_logio.so
> > LoadModule env_module modules/mod_env.so
> > LoadModule mime_magic_module modules/mod_mime_magic.so
> > LoadModule cern_meta_module modules/mod_cern_meta.so
> > LoadModule expires_module modules/mod_expires.so
> > LoadModule deflate_module modules/mod_deflate.so
> > LoadModule headers_module modules/mod_headers.so
> > LoadModule usertrack_module modules/mod_usertrack.so
> > LoadModule setenvif_module modules/mod_setenvif.so
> > LoadModule mime_module modules/mod_mime.so
> > LoadModule dav_module modules/mod_dav.so
> > LoadModule status_module modules/mod_status.so
> > LoadModule autoindex_module modules/mod_autoindex.so
> > LoadModule asis_module modules/mod_asis.so
> > LoadModule info_module modules/mod_info.so
> > LoadModule dav_fs_module modules/mod_dav_fs.so
> > LoadModule vhost_alias_module modules/mod_vhost_alias.so
> > LoadModule negotiation_module modules/mod_negotiation.so
> > LoadModule dir_module modules/mod_dir.so
> > LoadModule actions_module modules/mod_actions.so
> > LoadModule speling_module modules/mod_speling.so
> > LoadModule userdir_module modules/mod_userdir.so
> > LoadModule alias_module modules/mod_alias.so
> > LoadModule rewrite_module modules/mod_rewrite.so
> > LoadModule proxy_module modules/mod_proxy.so
> > LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> > LoadModule proxy_http_module modules/mod_proxy_http.so
> > LoadModule proxy_connect_module modules/mod_proxy_connect.so
> > LoadModule cache_module modules/mod_cache.so
> > LoadModule suexec_module modules/mod_suexec.so
> > LoadModule disk_cache_module modules/mod_disk_cache.so
> > LoadModule file_cache_module modules/mod_file_cache.so
> > LoadModule mem_cache_module modules/mod_mem_cache.so
> > LoadModule cgi_module modules/mod_cgi.so
> >
> > #
> > # Load config files from the config directory "/etc/httpd/conf.d".
> > #
> > Include conf.d/*.conf
> >
> > #
> > # ExtendedStatus controls whether Apache will generate "full" status
> > # information (ExtendedStatus On) or just basic information (ExtendedStatus
> > # Off) when the "server-status" handler is called. The default is Off.
> > #
> > #ExtendedStatus On
> >
> > #
> > # If you wish httpd to run as a different user or group, you must run
> > # httpd as root initially and it will switch.
> > #
> > # User/Group: The name (or #number) of the user/group to run httpd as.
> > # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> > # . On HPUX you may not be able to use shared memory as nobody, and the
> > # suggested workaround is to create a user www and use that user.
> > # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> > # when the value of (unsigned)Group is above 60000;
> > # don't use Group #-1 on these systems!
> > #
> > User apache
> > Group apache
> >
> > ### Section 2: 'Main' server configuration
> > #
> > # The directives in this section set up the values used by the 'main'
> > # server, which responds to any requests that aren't handled by a
> > # <VirtualHost> definition. These values also provide defaults for
> > # any <VirtualHost> containers you may define later in the file.
> > #
> > # All of these directives may appear inside <VirtualHost> containers,
> > # in which case these default settings will be overridden for the
> > # virtual host being defined.
> > #
> >
> > #
> > # ServerAdmin: Your address, where problems with the server should be
> > # e-mailed. This address appears on some server-generated pages, such
> > # as error documents. e.g. admin at your-domain.com
> > #
> > ServerAdmin root at localhost
> >
> > #
> > # ServerName gives the name and port that the server uses to identify itself.
> > # This can often be determined automatically, but we recommend you specify
> > # it explicitly to prevent problems during startup.
> > #
> > # If this is not set to valid DNS name for your host, server-generated
> > # redirections will not work. See also the UseCanonicalName directive.
> > #
> > # If your host doesn't have a registered DNS name, enter its IP address here.
> > # You will have to access it by its address anyway, and this will make
> > # redirections work in a sensible way.
> > #
> > #ServerName www.example.com:80
> >
> > #
> > # UseCanonicalName: Determines how Apache constructs self-referencing
> > # URLs and the SERVER_NAME and SERVER_PORT variables.
> > # When set "Off", Apache will use the Hostname and Port supplied
> > # by the client. When set "On", Apache will use the value of the
> > # ServerName directive.
> > #
> > UseCanonicalName Off
> >
> > #
> > # DocumentRoot: The directory out of which you will serve your
> > # documents. By default, all requests are taken from this directory, but
> > # symbolic links and aliases may be used to point to other locations.
> > #
> > DocumentRoot "/var/www/html"
> >
> > #
> > # Each directory to which Apache has access can be configured with respect
> > # to which services and features are allowed and/or disabled in that
> > # directory (and its subdirectories).
> > #
> > # First, we configure the "default" to be a very restrictive set of
> > # features.
> > #
> > <Directory />
> > Options FollowSymLinks
> > AllowOverride None
> > </Directory>
> >
> > #
> > # Note that from this point forward you must specifically allow
> > # particular features to be enabled - so if something's not working as
> > # you might expect, make sure that you have specifically enabled it
> > # below.
> > #
> >
> > #
> > # This should be changed to whatever you set DocumentRoot to.
> > #
> > <Directory "/var/www/html">
> >
> > #
> > # Possible values for the Options directive are "None", "All",
> > # or any combination of:
> > # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
> > #
> > # Note that "MultiViews" must be named *explicitly* --- "Options All"
> > # doesn't give it to you.
> > #
> > # The Options directive is both complicated and important. Please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#options
> > # for more information.
> > #
> > Options Indexes FollowSymLinks
> >
> > #
> > # AllowOverride controls what directives may be placed in .htaccess files.
> > # It can be "All", "None", or any combination of the keywords:
> > # Options FileInfo AuthConfig Limit
> > #
> > AllowOverride None
> >
> > #
> > # Controls who can get stuff from this server.
> > #
> > Order allow,deny
> > Allow from all
> >
> > </Directory>
> >
> > #
> > # UserDir: The name of the directory that is appended onto a user's home
> > # directory if a ~user request is received.
> > #
> > # The path to the end user account 'public_html' directory must be
> > # accessible to the webserver userid. This usually means that ~userid
> > # must have permissions of 711, ~userid/public_html must have permissions
> > # of 755, and documents contained therein must be world-readable.
> > # Otherwise, the client will only receive a "403 Forbidden" message.
> > #
> > # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
> > #
> > <IfModule mod_userdir.c>
> > #
> > # UserDir is disabled by default since it can confirm the presence
> > # of a username on the system (depending on home directory
> > # permissions).
> > #
> > UserDir disable
> >
> > #
> > # To enable requests to /~user/ to serve the user's public_html
> > # directory, remove the "UserDir disable" line above, and uncomment
> > # the following line instead:
> > #
> > #UserDir public_html
> >
> > </IfModule>
> >
> > #
> > # Control access to UserDir directories. The following is an example
> > # for a site where these directories are restricted to read-only.
> > #
> > #<Directory /home/*/public_html>
> > # AllowOverride FileInfo AuthConfig Limit
> > # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> > # <Limit GET POST OPTIONS>
> > # Order allow,deny
> > # Allow from all
> > # </Limit>
> > # <LimitExcept GET POST OPTIONS>
> > # Order deny,allow
> > # Deny from all
> > # </LimitExcept>
> > #</Directory>
> >
> > #
> > # DirectoryIndex: sets the file that Apache will serve if a directory
> > # is requested.
> > #
> > # The index.html.var file (a type-map) is used to deliver content-
> > # negotiated documents. The MultiViews Option can be used for the
> > # same purpose, but it is much slower.
> > #
> > DirectoryIndex index.html index.html.var
> >
> > #
> > # AccessFileName: The name of the file to look for in each directory
> > # for additional configuration directives. See also the AllowOverride
> > # directive.
> > #
> > AccessFileName .htaccess
> >
> > #
> > # The following lines prevent .htaccess and .htpasswd files from being
> > # viewed by Web clients.
> > #
> > <Files ~ "^\.ht">
> > Order allow,deny
> > Deny from all
> > </Files>
> >
> > #
> > # TypesConfig describes where the mime.types file (or equivalent) is
> > # to be found.
> > #
> > TypesConfig /etc/mime.types
> >
> > #
> > # DefaultType is the default MIME type the server will use for a document
> > # if it cannot otherwise determine one, such as from filename extensions.
> > # If your server contains mostly text or HTML documents, "text/plain" is
> > # a good value. If most of your content is binary, such as applications
> > # or images, you may want to use "application/octet-stream" instead to
> > # keep browsers from trying to display binary files as though they are
> > # text.
> > #
> > DefaultType text/plain
> >
> > #
> > # The mod_mime_magic module allows the server to use various hints from the
> > # contents of the file itself to determine its type. The MIMEMagicFile
> > # directive tells the module where the hint definitions are located.
> > #
> > <IfModule mod_mime_magic.c>
> > # MIMEMagicFile /usr/share/magic.mime
> > MIMEMagicFile conf/magic
> > </IfModule>
> >
> > #
> > # HostnameLookups: Log the names of clients or just their IP addresses
> > # e.g., www.apache.org (on) or 204.62.129.132 (off).
> > # The default is off because it'd be overall better for the net if people
> > # had to knowingly turn this feature on, since enabling it means that
> > # each client request will result in AT LEAST one lookup request to the
> > # nameserver.
> > #
> > HostnameLookups Off
> >
> > #
> > # EnableMMAP: Control whether memory-mapping is used to deliver
> > # files (assuming that the underlying OS supports it).
> > # The default is on; turn this off if you serve from NFS-mounted
> > # filesystems. On some systems, turning it off (regardless of
> > # filesystem) can improve performance; for details, please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
> > #
> > #EnableMMAP off
> >
> > #
> > # EnableSendfile: Control whether the sendfile kernel support is
> > # used to deliver files (assuming that the OS supports it).
> > # The default is on; turn this off if you serve from NFS-mounted
> > # filesystems. Please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
> > #
> > #EnableSendfile off
> >
> > #
> > # ErrorLog: The location of the error log file.
> > # If you do not specify an ErrorLog directive within a <VirtualHost>
> > # container, error messages relating to that virtual host will be
> > # logged here. If you *do* define an error logfile for a <VirtualHost>
> > # container, that host's errors will be logged there and not here.
> > #
> > ErrorLog logs/error_log
> >
> > #
> > # LogLevel: Control the number of messages logged to the error_log.
> > # Possible values include: debug, info, notice, warn, error, crit,
> > # alert, emerg.
> > #
> > LogLevel warn
> >
> > #
> > # The following directives define some format nicknames for use with
> > # a CustomLog directive (see below).
> > #
> > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
> > LogFormat "%h %l %u %t \"%r\" %>s %b" common
> > LogFormat "%{Referer}i -> %U" referer
> > LogFormat "%{User-agent}i" agent
> >
> > # "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
> > # requires the mod_logio module to be loaded.
> > #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
> >
> > #
> > # The location and format of the access logfile (Common Logfile Format).
> > # If you do not define any access logfiles within a <VirtualHost>
> > # container, they will be logged here. Contrariwise, if you *do*
> > # define per-<VirtualHost> access logfiles, transactions will be
> > # logged therein and *not* in this file.
> > #
> > #CustomLog logs/access_log common
> >
> > #
> > # If you would like to have separate agent and referer logfiles, uncomment
> > # the following directives.
> > #
> > #CustomLog logs/referer_log referer
> > #CustomLog logs/agent_log agent
> >
> > #
> > # For a single logfile with access, agent, and referer information
> > # (Combined Logfile Format), use the following directive:
> > #
> > CustomLog logs/access_log combined
> >
> > #
> > # Optionally add a line containing the server version and virtual host
> > # name to server-generated pages (internal error documents, FTP directory
> > # listings, mod_status and mod_info output etc., but not CGI generated
> > # documents or custom error documents).
> > # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> > # Set to one of: On | Off | EMail
> > #
> > ServerSignature On
> >
> > #
> > # Aliases: Add here as many aliases as you need (with no limit). The format is
> > # Alias fakename realname
> > #
> > # Note that if you include a trailing / on fakename then the server will
> > # require it to be present in the URL. So "/icons" isn't aliased in this
> > # example, only "/icons/". If the fakename is slash-terminated, then the
> > # realname must also be slash terminated, and if the fakename omits the
> > # trailing slash, the realname must also omit it.
> > #
> > # We include the /icons/ alias for FancyIndexed directory listings. If you
> > # do not use FancyIndexing, you may comment this out.
> > #
> > Alias /icons/ "/var/www/icons/"
> > Alias /serweb/ "/var/www/html/serweb/html"
> >
> > <Directory "/var/www/icons">
> > Options Indexes MultiViews
> > AllowOverride None
> > Order allow,deny
> > Allow from all
> > </Directory>
> >
> > #
> > # WebDAV module configuration section.
> > #
> > <IfModule mod_dav_fs.c>
> > # Location of the WebDAV lock database.
> > DAVLockDB /var/lib/dav/lockdb
> > </IfModule>
> >
> > #
> > # ScriptAlias: This controls which directories contain server scripts.
> > # ScriptAliases are essentially the same as Aliases, except that
> > # documents in the realname directory are treated as applications and
> > # run by the server when requested rather than as documents sent to the client.
> > # The same rules about trailing "/" apply to ScriptAlias directives as to
> > # Alias.
> > #
> > ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
> >
> > #
> > # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
> > # CGI directory exists, if you have that configured.
> > #
> > <Directory "/var/www/cgi-bin">
> > AllowOverride None
> > Options None
> > Order allow,deny
> > Allow from all
> > </Directory>
> >
> > #
> > # Redirect allows you to tell clients about documents which used to exist in
> > # your server's namespace, but do not anymore. This allows you to tell the
> > # clients where to look for the relocated document.
> > # Example:
> > # Redirect permanent /foo http://www.example.com/bar
> >
> > #
> > # Directives controlling the display of server-generated directory listings.
> > #
> >
> > #
> > # IndexOptions: Controls the appearance of server-generated directory
> > # listings.
> > #
> > IndexOptions FancyIndexing VersionSort NameWidth=*
> >
> > #
> > # AddIcon* directives tell the server which icon to show for different
> > # files or filename extensions. These are only displayed for
> > # FancyIndexed directories.
> > #
> > AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
> >
> > AddIconByType (TXT,/icons/text.gif) text/*
> > AddIconByType (IMG,/icons/image2.gif) image/*
> > AddIconByType (SND,/icons/sound2.gif) audio/*
> > AddIconByType (VID,/icons/movie.gif) video/*
> >
> > AddIcon /icons/binary.gif .bin .exe
> > AddIcon /icons/binhex.gif .hqx
> > AddIcon /icons/tar.gif .tar
> > AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> > AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> > AddIcon /icons/a.gif .ps .ai .eps
> > AddIcon /icons/layout.gif .html .shtml .htm .pdf
> > AddIcon /icons/text.gif .txt
> > AddIcon /icons/c.gif .c
> > AddIcon /icons/p.gif .pl .py
> > AddIcon /icons/f.gif .for
> > AddIcon /icons/dvi.gif .dvi
> > AddIcon /icons/uuencoded.gif .uu
> > AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> > AddIcon /icons/tex.gif .tex
> > AddIcon /icons/bomb.gif core
> >
> > AddIcon /icons/back.gif ..
> > AddIcon /icons/hand.right.gif README
> > AddIcon /icons/folder.gif ^^DIRECTORY^^
> > AddIcon /icons/blank.gif ^^BLANKICON^^
> >
> > #
> > # DefaultIcon is which icon to show for files which do not have an icon
> > # explicitly set.
> > #
> > DefaultIcon /icons/unknown.gif
> >
> > #
> > # AddDescription allows you to place a short description after a file in
> > # server-generated indexes. These are only displayed for FancyIndexed
> > # directories.
> > # Format: AddDescription "description" filename
> > #
> > #AddDescription "GZIP compressed document" .gz
> > #AddDescription "tar archive" .tar
> > #AddDescription "GZIP compressed tar archive" .tgz
> >
> > #
> > # ReadmeName is the name of the README file the server will look for by
> > # default, and append to directory listings.
> > #
> > # HeaderName is the name of a file which should be prepended to
> > # directory indexes.
> > ReadmeName README.html
> > HeaderName HEADER.html
> >
> > #
> > # IndexIgnore is a set of filenames which directory indexing should ignore
> > # and not include in the listing. Shell-style wildcarding is permitted.
> > #
> > IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
> >
> > #
> > # DefaultLanguage and AddLanguage allows you to specify the language of
> > # a document. You can then use content negotiation to give a browser a
> > # file in a language the user can understand.
> > #
> > # Specify a default language. This means that all data
> > # going out without a specific language tag (see below) will
> > # be marked with this one. You probably do NOT want to set
> > # this unless you are sure it is correct for all cases.
> > #
> > # * It is generally better to not mark a page as
> > # * being a certain language than marking it with the wrong
> > # * language!
> > #
> > # DefaultLanguage nl
> > #
> > # Note 1: The suffix does not have to be the same as the language
> > # keyword --- those with documents in Polish (whose net-standard
> > # language code is pl) may wish to use "AddLanguage pl .po" to
> > # avoid the ambiguity with the common suffix for perl scripts.
> > #
> > # Note 2: The example entries below illustrate that in some cases
> > # the two character 'Language' abbreviation is not identical to
> > # the two character 'Country' code for its country,
> > # E.g. 'Danmark/dk' versus 'Danish/da'.
> > #
> > # Note 3: In the case of 'ltz' we violate the RFC by using a three char
> > # specifier. There is 'work in progress' to fix this and get
> > # the reference data for rfc1766 cleaned up.
> > #
> > # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
> > # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
> > # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
> > # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
> > # Norwegian (no) - Polish (pl) - Portugese (pt)
> > # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
> > # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
> > #
> > AddLanguage ca .ca
> > AddLanguage cs .cz .cs
> > AddLanguage da .dk
> > AddLanguage de .de
> > AddLanguage el .el
> > AddLanguage en .en
> > AddLanguage eo .eo
> > AddLanguage es .es
> > AddLanguage et .et
> > AddLanguage fr .fr
> > AddLanguage he .he
> > AddLanguage hr .hr
> > AddLanguage it .it
> > AddLanguage ja .ja
> > AddLanguage ko .ko
> > AddLanguage ltz .ltz
> > AddLanguage nl .nl
> > AddLanguage nn .nn
> > AddLanguage no .no
> > AddLanguage pl .po
> > AddLanguage pt .pt
> > AddLanguage pt-BR .pt-br
> > AddLanguage ru .ru
> > AddLanguage sv .sv
> > AddLanguage zh-CN .zh-cn
> > AddLanguage zh-TW .zh-tw
> >
> > #
> > # LanguagePriority allows you to give precedence to some languages
> > # in case of a tie during content negotiation.
> > #
> > # Just list the languages in decreasing order of preference. We have
> > # more or less alphabetized them here. You probably want to change this.
> > #
> > LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
> >
> > #
> > # ForceLanguagePriority allows you to serve a result page rather than
> > # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
> > # [in case no accepted languages matched the available variants]
> > #
> > ForceLanguagePriority Prefer Fallback
> >
> > #
> > # Specify a default charset for all content served; this enables
> > # interpretation of all content as UTF-8 by default. To use the
> > # default browser choice (ISO-8859-1), or to allow the META tags
> > # in HTML content to override this choice, comment out this
> > # directive:
> > #
> > AddDefaultCharset UTF-8
> >
> > #
> > # AddType allows you to add to or override the MIME configuration
> > # file mime.types for specific file types.
> > #
> > #AddType application/x-tar .tgz
> >
> > #
> > # AddEncoding allows you to have certain browsers uncompress
> > # information on the fly. Note: Not all browsers support this.
> > # Despite the name similarity, the following Add* directives have nothing
> > # to do with the FancyIndexing customization directives above.
> > #
> > #AddEncoding x-compress .Z
> > #AddEncoding x-gzip .gz .tgz
> >
> > # If the AddEncoding directives above are commented-out, then you
> > # probably should define those extensions to indicate media types:
> > #
> > AddType application/x-compress .Z
> > AddType application/x-gzip .gz .tgz
> >
> > #
> > # AddHandler allows you to map certain file extensions to "handlers":
> > # actions unrelated to filetype. These can be either built into the server
> > # or added with the Action directive (see below)
> > #
> > # To use CGI scripts outside of ScriptAliased directories:
> > # (You will also need to add "ExecCGI" to the "Options" directive.)
> > #
> > #AddHandler cgi-script .cgi
> >
> > #
> > # For files that include their own HTTP headers:
> > #
> > #AddHandler send-as-is asis
> >
> > #
> > # For type maps (negotiated resources):
> > # (This is enabled by default to allow the Apache "It Worked" page
> > # to be distributed in multiple languages.)
> > #
> > AddHandler type-map var
> >
> > #
> > # Filters allow you to process content before it is sent to the client.
> > #
> > # To parse .shtml files for server-side includes (SSI):
> > # (You will also need to add "Includes" to the "Options" directive.)
> > #
> > AddType text/html .shtml
> > AddOutputFilter INCLUDES .shtml
> >
> > #
> > # Action lets you define media types that will execute a script whenever
> > # a matching file is called. This eliminates the need for repeated URL
> > # pathnames for oft-used CGI file processors.
> > # Format: Action media/type /cgi-script/location
> > # Format: Action handler-name /cgi-script/location
> > #
> >
> > #
> > # Customizable error responses come in three flavors:
> > # 1) plain text 2) local redirects 3) external redirects
> > #
> > # Some examples:
> > #ErrorDocument 500 "The server made a boo boo."
> > #ErrorDocument 404 /missing.html
> > #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> > #ErrorDocument 402 http://www.example.com/subscription_info.html
> > #
> >
> > #
> > # Putting this all together, we can internationalize error responses.
> > #
> > # We use Alias to redirect any /error/HTTP_<error>.html.var response to
> > # our collection of by-error message multi-language collections. We use
> > # includes to substitute the appropriate text.
> > #
> > # You can modify the messages' appearance without changing any of the
> > # default HTTP_<error>.html.var files by adding the line:
> > #
> > # Alias /error/include/ "/your/include/path/"
> > #
> > # which allows you to create your own set of files by starting with the
> > # /var/www/error/include/ files and
> > # copying them to /your/include/path/, even on a per-VirtualHost basis.
> > #
> >
> > Alias /error/ "/var/www/error/"
> >
> > <IfModule mod_negotiation.c>
> > <IfModule mod_include.c>
> > <Directory "/var/www/error">
> > AllowOverride None
> > Options IncludesNoExec
> > AddOutputFilter Includes html
> > AddHandler type-map var
> > Order allow,deny
> > Allow from all
> > LanguagePriority en es de fr
> > ForceLanguagePriority Prefer Fallback
> > </Directory>
> >
> > # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
> > # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
> > # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
> > # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
> > # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
> > # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
> > # ErrorDocument 410 /error/HTTP_GONE.html.var
> > # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
> > # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
> > # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
> > # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
> > # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
> > # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
> > # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
> > # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
> > # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
> > # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
> >
> > </IfModule>
> > </IfModule>
> >
> > #
> > # The following directives modify normal HTTP response behavior to
> > # handle known problems with browser implementations.
> > #
> > BrowserMatch "Mozilla/2" nokeepalive
> > BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
> > BrowserMatch "RealPlayer 4\.0" force-response-1.0
> > BrowserMatch "Java/1\.0" force-response-1.0
> > BrowserMatch "JDK/1\.0" force-response-1.0
> >
> > #
> > # The following directive disables redirects on non-GET requests for
> > # a directory that does not include the trailing slash. This fixes a
> > # problem with Microsoft WebFolders which does not appropriately handle
> > # redirects for folders with DAV methods.
> > # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
> > #
> > BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
> > BrowserMatch "^WebDrive" redirect-carefully
> > BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
> > BrowserMatch "^gnome-vfs" redirect-carefully
> >
> > #
> > # Allow server status reports generated by mod_status,
> > # with the URL of http://servername/server-status
> > # Change the ".example.com" to match your domain to enable.
> > #
> > #<Location /server-status>
> > # SetHandler server-status
> > # Order deny,allow
> > # Deny from all
> > # Allow from .example.com
> > #</Location>
> >
> > #
> > # Allow remote server configuration reports, with the URL of
> > # http://servername/server-info (requires that mod_info.c be loaded).
> > # Change the ".example.com" to match your domain to enable.
> > #
> > #<Location /server-info>
> > # SetHandler server-info
> > # Order deny,allow
> > # Deny from all
> > # Allow from .example.com
> > #</Location>
> >
> > #
> > # Proxy Server directives. Uncomment the following lines to
> > # enable the proxy server:
> > #
> > #<IfModule mod_proxy.c>
> > #ProxyRequests On
> > #
> > #<Proxy *>
> > # Order deny,allow
> > # Deny from all
> > # Allow from .example.com
> > #</Proxy>
> >
> > #
> > # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> > # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
> > # Set to one of: Off | On | Full | Block
> > #
> > #ProxyVia On
> >
> > #
> > # To enable a cache of proxied content, uncomment the following lines.
> > # See http://httpd.apache.org/docs-2.0/mod/mod_cache.html for more details.
> > #
> > #<IfModule mod_disk_cache.c>
> > # CacheEnable disk /
> > # CacheRoot "/var/cache/mod_proxy"
> > #</IfModule>
> > #
> >
> > #</IfModule>
> > # End of proxy directives.
> >
> > ### Section 3: Virtual Hosts
> > #
> > # VirtualHost: If you want to maintain multiple domains/hostnames on your
> > # machine you can setup VirtualHost containers for them. Most configurations
> > # use only name-based virtual hosts so the server doesn't need to worry about
> > # IP addresses. This is indicated by the asterisks in the directives below.
> > #
> > # Please see the documentation at
> > # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
> > # for further details before you try to setup virtual hosts.
> > #
> > # You may use the command line option '-S' to verify your virtual host
> > # configuration.
> >
> > #
> > # Use name-based virtual hosting.
> > #
> > #NameVirtualHost *:80
> > #
> > # NOTE: NameVirtualHost cannot be used without a port specifier
> > # (e.g. :80) if mod_ssl is being used, due to the nature of the
> > # SSL protocol.
> > #
> >
> > #
> > # VirtualHost example:
> > # Almost any Apache directive may go into a VirtualHost container.
> > # The first VirtualHost section is used for requests without a known
> > # server name.
> > #
> > #<VirtualHost *:80>
> > # ServerAdmin webmaster at dummy-host.example.com
> > # DocumentRoot /www/docs/dummy-host.example.com
> > # ServerName dummy-host.example.com
> > # ErrorLog logs/dummy-host.example.com-error_log
> > # CustomLog logs/dummy-host.example.com-access_log common
> > #</VirtualHost>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list