[Serusers] Call transfer

[jorain]

Hi Greger

Thanks, I got it.


Regards,
jorain
  ----- Original Message ----- 
  From: Greger V. Teigre 
  To: jorain 
  Cc: SER+RTPproxy 
  Sent: Wednesday, December 06, 2006 8:43 PM
  Subject: Re: [Serusers] Call transfer


  You need to relay REFER to the other UA, SER should not be involved.  The NOTIFY should not be stopped either, but relayed.
  Normally, REFER should be t_relay'ed directly to the UA, but you may have some NAT issues as the UA never answers.  Look at the REFER and see where it goes.
  g-)

  jorain wrote: 
    Hi all,

    Is it deal with the ctd.sh script? Configure inside loose_route()? 

    I can get the REFER message but no responses (202 Accepted and NOTIFY) to it.
    So I send reply 202 inside loose_route if method=REFER.

    After that, inside ethereal, I can see the code 202 response to REFER.
    However, It send REFER again and after a while 408 TIMEOUT.

    This is what i configured:

    if(loose_route()){
        if(method=="BYE"){
            setflag(1);
            setflag(2);
        };

        if(method=="REFER"){
            sl_send_reply("202","Accepted");
        };

        t_relay();
        break;
    };




    Please help. 

    Thanks in advance

    Regards,
    jorain
      ----- Original Message ----- 
      From: Greger V. Teigre 
      To: jorain 
      Sent: Tuesday, December 05, 2006 9:30 PM
      Subject: Re: [Serusers] Call transfer


      cc serusers

      jorain wrote: 
        Thanks Greger,

            Could you give me some clues how to do that or some references about it? I really have no idea.

        Thanks again.

        Regards,
        jorain
          ----- Original Message ----- 
          From: Greger V. Teigre 
          To: jorain 
          Cc: SER+RTPproxy 
          Sent: Monday, December 04, 2006 7:48 PM
          Subject: Re: [Serusers] Call transfer


          Well, yes, you have to route REFER, and you should allow NOTIFYs.
          g-)

          jorain wrote: 
            Hi all,

            I have some question about call transfer.

            When I press transfer key follow by the new destination and "send", I can see the REFER message inside ethereal but after that request timeout error(408). 

            Inside REFER message, i can see the refer-to and referred-by values are correct.
            Do I need to add something inside ser.cfg to enable call transfering? Because I cannot find any sample codings regarding ser call transfer.



            Thanks for any help.

            Regards,
            jorain
--------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
  ----------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20061207/f9176917/attachment.htm>