[Users] help needed on avpops

[Zoran Milic]

Thanks!!
It realy helped! The right line should be:

        if(!avp_check("$avp(s:adresa)", "eq/$avp(s:adresa)/ig"))


                                                                             
                    best regards, Zoran

P.S.
        It was not a mistake, i tried to compare the same avp's to see if it 
is comparing or doing something else.


----- Original Message ----- 
From: "Daniel-Constantin Mierla" <daniel at voice-system.ro>
To: "Zoran Milic" <miliczo at sezampro.yu>
Cc: <users at openser.org>
Sent: Friday, December 22, 2006 12:44 PM
Subject: Re: [Users] help needed on avpops


> Hello,
>
> I guess you are using openser 1.1.0, bu the config is still for the 1.0.x 
> in some cases. See:
>
> http://openser.org/dokuwiki/doku.php/install:1.0.x-to-1.1.x#avpops
>
> If I am right with my assumption, then you have to change: $adresa in 
> $avp(adresa) in avp_check(). Also, there looks to be a mistake, you 
> compare the avp it itself.
>
> Cheers,
> Daniel
>
> On 12/22/06 13:35, Zoran Milic wrote:
>> Hi guys,
>>  I am trying to set up radius and avp for ages now, and this time i think 
>> i am close to it. I have a problem and I can't find any information about 
>> it.
>>  The thing is, my soft agent (set to uid 101) can't register, and it is 
>> getting "Forbidden IP" even with this in the cfg file (see below) I have 
>> set up freeradius and radiusclient-ng according to the manual on 
>> http://www..openser.org/docs/openser-radius-1.0.x.html 
>> <http://www.openser.org/docs/openser-radius-1.0.x.html>. I can't find 
>> anything on the error i am getting in my log. If you need my complete 
>> .cfg or log file, just ask, and I will send them promptly.
>>  thanks in advance, best regards, Zoran
>>  *openser.cfg:*
>> ...
>> xlog("L_ERR","rpid = $avp(s:rpid)");
>> xlog("L_ERR","adresa = $avp(s:adresa)");
>> xlog("L_ERR","adresa2 = $avp(s:adresa2)");
>>  #       check the src ip address
>> #       avp_load_radius("caller");
>>   if(!avp_check("$adresa", "eq/$adresa/ig"))
>>             {
>>                 sl_send_reply("403", "Forbidden IP");
>>                 exit;
>>             };
>>             save("location");
>>             exit;
>>         };
>> ...
>>  *freeradius/users:*
>> ...
>> 101 Auth-Type := Digest, User-Password == "101"
>>         Reply-Message = "Authenticated",
>>         Sip-Avp += "rpid:101",
>>         Sip-Avp += "adresa:10.0.0.157",
>>         Sip-Avp += "adresa2:10.0.0.157"
>> ...
>>
>> *last entries in the log after the rejected register.
>> *...
>> DEBUG:auth_radius:extract_avp: AVP val is <10.0.0.157>
>> DEBUG:auth_radius:generate_avps: AVP 'adresa'/0='10.0.0.157'/0 has been 
>> added
>> DEBUG:auth_radius:extract_avp: string is <adresa2:10.0.0.157>
>> DEBUG:auth_radius:extract_avp: AVP name is <adresa2>
>> DEBUG:auth_radius:extract_avp: AVP val is <10.0.0.157>
>> DEBUG:auth_radius:generate_avps: AVP 'adresa2'/0='10.0.0.157'/0 has been 
>> added
>> DEBUG:auth_radius:extract_avp: string is <rpid:101>
>> DEBUG:auth_radius:extract_avp: AVP name is <rpid>
>> DEBUG:auth_radius:extract_avp: AVP val is <101>
>> DEBUG:auth_radius:generate_avps: AVP 'rpid'/0='101'/0 has been added
>> DEBUG:auth_radius:extract_avp: string is <adresa:10.0.0.157>
>> DEBUG:auth_radius:extract_avp: AVP name is <adresa>
>> DEBUG:auth_radius:extract_avp: AVP val is <10.0.0.157>
>> DEBUG:auth_radius:generate_avps: AVP 'adresa'/0='10.0.0.157'/0 has been 
>> added
>> DEBUG:auth_radius:extract_avp: string is <adresa2:10.0.0.157>
>> DEBUG:auth_radius:extract_avp: AVP name is <adresa2>
>> DEBUG:auth_radius:extract_avp: AVP val is <10.0.0.157>
>> DEBUG:auth_radius:generate_avps: AVP 'adresa2'/0='10.0.0.157'/0 has been 
>> added
>> rpid = 101
>> adresa = 10.0.0.157
>> adresa2 = 10.0.0.157
>> xl_get_spec_value: error - null sp->itf
>> ERROR:avpops:ops_check_avp: cannot get src value
>> parse_headers: flags=ffffffffffffffff
>> check_via_address(192.168.52.145, 192.168.52.145, 0)
>> DEBUG:destroy_avp_list: destroying list 0x404d9238
>> receive_msg: cleaning up
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.26/597 - Release Date: 
> 12/21/2006 6:45 PM
>
>