[Serusers] Help! a beginner trying to get SER going on a RedHat 9 machine

[Adrian Levin]

Hi,

I have installed SER on a RedHat 9 machine and it seems to start OK,
however it does not seem to open port 5060 to receive messages.  The
following is the debug from the console - the line 
	"0(0) init_unixsock_socket: No unix domain socket will be
opened" 
does not look good.

Any ideas?

Thanks,
Adrian Levin

 

Some of the debug produced on the console:

Listening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 217.155.103.17 [217.155.103.17]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 217.155.103.17 [217.155.103.17]:5060

Aliases:

             tcp: dsl-217-155-103-17.zen.co.uk:5060
             tcp: localhost:5060
             tcp: localhost.localdomain:5060
             tcp: HAL:5060
             udp: dsl-217-155-103-17.zen.co.uk:5060
             udp: localhost:5060
             udp: localhost.localdomain:5060
             udp: HAL:5060


WARNING: no fork mode  and more than one listen address found(will use
only the
the first one)

 0(4667) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
 0(4667) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548
 0(4667) fm_malloc_init(0x42133000, 33554432), start=0x42133000
 0(4667) shm_mem_init: success
 0(0) core dump limits set to 4294967295
 0(0) DEBUG: init_mod: sl_module
stateless - initializing
 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
 0(0) unixsock_register_cmd: New command (sl_stats) registered
 0(0) unixsock_register_cmd: New command (ul_add) registered
 0(0) unixsock_register_cmd: New command (ul_show_contact) registered
 0(0) DEBUG: init_mod: registrar

 
 0(0) WARNING: using only the first listen address (no fork)
 0(0) DBG: open_uac_fifo: opening fifo...
 0(0) DEBUG: FIFO created @ /tmp/ser_fifo
 0(0) DEBUG: fifo /tmp/ser_fifo opened, mode=432
 0(0) init_unixsock_socket: No unix domain socket will be opened
 1(0) DEBUG: init_mod_child (-1): tm
 1(0) DEBUG: callid: '6fe7fef8-0 at 127.0.0.1'
 1(0) DEBUG: init_mod_child (-1): usrloc


 


I am using the default configuration file - with the port number
un-commented out, although I have tried with it commented and it seems
to make no difference.

The top of my ser.cfg file:

#
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)
/* Uncomment these lines to enter debugging mode */
debug=8
fork=no
log_stderror=yes
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ---------------------------------- 
--  
Adrian Levin 
VOIP Consultant, Zen Internet 
T: 0845 058 9000 
F: 0845 058 9005 
W: http://www.zen.co.uk/ 
 
*** NEW! Managed Security from Zen Internet *** 
 
 
Consultation - Configuration - Management - Support  
 
Trust Zen to protect your network against viruses, spam and intrusions 
http://www.zen.co.uk/firewalls 
 
 
 
This email is confidential, may be legally privileged or otherwise protected from disclosure, and is sent for the attention of the intended recipient. If you are not the intended recipient of this email; please contact the sender and delete it from your system; you must not copy, reproduce, disclose to any other person, or otherwise use the contents of it or any attachment. Copyright in documents created by or on behalf of Zen Internet Limited remains vested in Zen Internet Limited