[Serusers] HELP NEEDED
Atle Samuelsen
clona at cyberhouse.no
Sat Apr 1 09:47:36 CEST 2006
Hi ,
Are you loading the record route module? (rr.so)
because, you can really not have any open if's. or route's.. (try it
yourself.try to do
route[10]{
};
and you will see it not working.
past your whol config. that way it's simpler to find bugs like this :-)
but, Without seeing it,I'm guessing your not loading the rr.so module.
-Atle
* Waqar Sheikh <waqar at gigo.co.uk> [060401 01:36]:
> Hi,
>
> I have managed to resolve the mediaproxy problem as it was running on a
> different IP no on a same machine and after the reboot the IP no was not
> allocated automatically so I had to assign an IP no to eth0 and that got
> rid of mediaproxy error. But I am still not able run SER it is still
> complaining about this:
>
> 0(2906) parse error (82,2-3): syntax error
> 0(2906) parse error (82,2-3): bad command
> 0(2906) parse error (82,4-8):
> ERROR: bad config file (3 errors)
>
>
> if (method=="INVITE" && client_nat_test("3")) {
> } else if (method!="REGISTER") {
> record_route();
> };
>
>
> I have tried what Atle said by not having an open if but it then
> complains about "record_route" line.
>
> Regards
>
>
>
>
>
>
> --
> (Connecting You To The World)
>
> Waqar Sheikh, MD
> GIGO Systems Ltd
>
> Baylis House, Stoke Poges Lane
> Slough, Berkshire, SL1 3PB
>
> V: 040606 at sip.ipclouds.co.uk ( call me free !!)
> T: +44 (0) 845 004 0606
> F: +44 (0) 870 7474784
> W: http://www.gigo.co.uk <http://www.gigo.co.uk/>
>
> SMS waqar to 82280 for my E-Contact Details
>
> -----Original Message-----
> From: sip [mailto:sip at arcdiv.com]
> Sent: 01 April 2006 00:23
> To: Waqar Sheikh; serusers at lists.iptel.org
> Cc: serusers-bounces at lists.iptel.org
> Subject: RE: [Serusers] HELP NEEDED
>
>
> You are running this as root, right? Just to make sure we narrow things
> down.
>
> Looks like mediaproxy's having issues... having never used it, I
> couldn't really tell you what could cause that or why, I'm afraid.
>
> N.
>
>
> On Fri, 31 Mar 2006 21:31:39 +0100, Waqar Sheikh wrote
> > Hi,
> >
> > I have looked in /var/log/messages file and this is what I have
> found:
> >
> >
> > Mar 31 18:06:10 sip-voip mediaproxy[2627]: mediaproxy started.
> > Mar 31 18:06:10 sip-voip mediaproxy[2627]: Listening for commands on
> local socket `/var/run/mediaproxy.sock'
> > Mar 31 18:06:10 sip-voip mediaproxy[2627]: Mediaproxy error: couldn't
> create command socket (Cannot assign requested address).
> > Mar 31 18:06:10 sip-voip mediaproxy[2627]: exiting.
> >
> >
> >
> >
> >
> >
> > --
> > (Connecting You To The World)
> > Waqar Sheikh, MD
> > GIGO Systems Ltd
> > Baylis House, Stoke Poges Lane
> > Slough, Berkshire, SL1 3PB
> > V: 040606 at sip.ipclouds.co.uk ( call me free !!)
> > T: +44 (0) 845 004 0606
> > F: +44 (0) 870 7474784
> > W: http://www.gigo.co.uk <http://www.gigo.co.uk/>
> > SMS waqar to 82280 for my E-Contact Details
>
>
> >
> > -----Original Message-----
> > From: sip [mailto:sip at arcdiv.com]
> > Sent: 31 March 2006 21:03
> > To: Waqar Sheikh; serusers at lists.iptel.org
> > Cc: serusers-bounces at lists.iptel.org
> > Subject: RE: [Serusers] HELP NEEDED
> >
> > The problem is likely with the client_nat_test("3") command. That's
> part of the mediaproxy module. Check at the top of the file and see if
> the mediaproxy.so module is being loaded. If so, check the system
> messages log and see if there are errors on startup that indicate the
> module may be failing to load for some reason.
> >
> > N.
> >
> >
> > On Fri, 31 Mar 2006 20:35:51 +0100, Waqar Sheikh wrote
> > > Here are the lines.
> > >
> > >
> > > if (method=="INVITE" && client_nat_test("3")) {
> > > } else if (method!="REGISTER") {
> > > record_route();
> > > };
> > >
> > > Regards
> > >
> > >
> > >
> > > --
> > > (Connecting You To The World)
> > > Waqar Sheikh, MD
> > > GIGO Systems Ltd
> > > Baylis House, Stoke Poges Lane
> > > Slough, Berkshire, SL1 3PB
> > > V: 040606 at sip.ipclouds.co.uk ( call me free !!)
> > > T: +44 (0) 845 004 0606
> > > F: +44 (0) 870 7474784
> > > W: http://www.gigo.co.uk <http://www.gigo.co.uk/>
> > > SMS waqar to 82280 for my E-Contact Details
>
>
> > >
> > > -----Original Message-----
> > > From: sip [mailto:sip at arcdiv.com]
> > > Sent: 31 March 2006 20:27
> > > To: Info; serusers at lists.iptel.org
> > > Cc: serusers-bounces at lists.iptel.org
> > > Subject: Re: [Serusers] HELP NEEDED
> > >
> > > That would indeed be line 81 and 82 of the
> ser_091105-noenum-full.cfg file.
> > >
> > > What are the lines?
> > >
> > > N.
> > >
> > >
> > > On Fri, 31 Mar 2006 20:02:43 +0100, Info wrote
> > > > Hi,
> > > >
> > > > I am new to SER as our company previous administrator who looked
> after our SIP server has left the company and left no documentation.
> > > >
> > > > Our server got restarted du to power failure and it is unable to
> start ser. This is what I am doing to start SER and I am getting
> following error.
> > > >
> > > > /usr/local/sbin/ser -f
> /usr/local/etc/ser/ser_091105-noenum-full.cfg
> > > >
> > > > and this is what I am getting in /var/log/messages file:
> > > >
> > > > 0(2772) parse error (81,38-39): unknown command, missing
> loadmodule?
> > > >
> > > > 0(2772) parse error (82,2-3): syntax error
> > > > 0(2772) parse error (82,2-3): bad command
> > > > 0(2772) parse error (82,4-8):
> > > > ERROR: bad config file (4 errors)
> > > >
> > > >
> > > > What I am trying to find out what is (81,38-39)?
> > > >
> > > > is it line 81 column 38-39 or else also how can I fix this
> problem.
> > > >
> > > > Please help me so I could get our phone system working again.
> > > >
> > > > Regards
> > > >
> > > > --
> > > > ( Connecting You To The World )
> > > >
> > > > SMS gigo to 82280 for our Contact Details
> > > >
> > >
> > >
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list