[Serusers] Handoff to PSTN
Colin Jordan
cjordan at econetwireless.com
Mon Sep 19 09:35:34 CEST 2005
Please find below the ser.cfg file:
__________________________________________________________________
#
# $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
# new insterted statement
listen=66.8.91.200
listen=127.0.0.1
# hostname matching an allias will satify the condition uri-myself
alias=gaco.co.za
alias=66.8.91.200
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
# this was commented
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# database location - NEW
#modparam("auth_db, "db_uri, "sql://ser:>heslo>@localhost/ser")
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("gaco.co.za", "subscriber")) {
www_challenge("gaco.co.za", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
# attemt handoff to PSTN
if (uri=~"^sip:9[0-9] *@gaco.co.za") {
log ("Forwarding to PSTN\n");
t_relay_to_udp("217.15.115.87","5060");
t_relay_to_tcp("217.15.115.87","5060");
break;
};
}
_____________________________________________________________________
-----Original Message-----
From: Iqbal [mailto:iqbal at gigo.co.uk]
Sent: Friday, September 16, 2005 1:16 PM
To: Colin Jordan
Cc: olivier.taylor at gmail.com; serusers at lists.iptel.org
Subject: Re: [Serusers] Handoff to PSTN
Hi
I need to see the ser.cfg, or to make life easier use one from
onsip.org, which is a good little get started guide, and will connect to
pstn, u just pretty much cut and paste the config make a few changes and
away you go
iqbal
Colin Jordan wrote:
>I do not too much about this, can please let me know where and in what part
>of the ser.cfg it will be?
>
>
>-----Original Message-----
>From: Iqbal [mailto:iqbal at gigo.co.uk]
>Sent: Friday, September 16, 2005 12:07 PM
>To: cjordan at econetwireless.com; olivier.taylor at gmail.com
>Cc: serusers at lists.iptel.org
>Subject: RE: [Serusers] Handoff to PSTN
>
>
>where u route your INVITE
>
>Iqbal
>
>On 9/16/2005, "Colin Jordan" <cjordan at econetwireless.com> wrote:
>
>
>
>>Where should I insert it in the code below?
>>
>>
>>
>># attempt handoff to PSTN
>>
>>if (uri=~“^sip:9[0-9]*@mydomain.com”) {
>>
>>log(“Forwarding to PSTN\n”);
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>break;
>>
>>};
>>
>>
>>
>>
>>
>> _____
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 4:00 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>prefix("666")
>>
>>-----Message d'origine-----
>>De : serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] De la
>>part de Colin Jordan
>>Envoyé : jeudi 15 septembre 2005 15:19
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>The PSTN has given me a prefix of 666# to dial before the number, where
can
>>I insert this so that it will allow me to make a call?
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:58 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>module tm
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:55
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:50 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>what's on the line 143???
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:46
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>The line 143 points to the script below. What modules will it be looking
>>for?
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:33 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>please reply to all
>>
>>
>>
>>u have a module not loaded, the one involved on line 143
>>
>>
>>
>>
>>
>>Olivier
>>
>>
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:28
>>À : 'Olivier Taylor'
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>It gives me the following message:
>>
>>_______________________________________________________
>>
>>
>>
>>Parse error (143,40-41): unknown command missing loadmodule?
>>
>>_______________________________________________________
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 1:21 PM
>>To: 'Colin Jordan'; serusers-request at lists.iptel.org
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>just have a look at /var/log/messages u will find the line number where
>>
>>
>the
>
>
>>error occurs
>>
>>
>>
>>Olivier
>>
>>-----Message d'origine-----
>>De : serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] De la
>>part de Colin Jordan
>>Envoyé : jeudi 15 septembre 2005 12:33
>>À : serusers-request at lists.iptel.org
>>Cc : serusers at lists.iptel.org
>>Objet : [Serusers] Handoff to PSTN
>>
>>
>>
>>I am not able to restart ser if I put he code below in the ser.cfg to
>>handoff calls to PSTN.
>>
>>
>>
>># attempt handoff to PSTN
>>
>>if (uri=~“^sip:9[0-9]*@mydomain.com”) {
>>
>>log(“Forwarding to PSTN\n”);
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>break;
>>
>>};
>>
>>
>>
>>
>>
>>Please help!!!!
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this
message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this
message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this
message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this
message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this
message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>
>>
>>
>>
>>
>>
>
>
>.
>
>
>
DISCLAIMER: The information in this message is confidential and is legally
privileged. It is intended solely for the addressee. Access to this message by
anyone else is unauthorized.If receiving in error please accept our apologies
and notify the sender immediately. You must also delete the original
message from your machine. If you are not the intended recipient, any use,
disclosure, copying, distribution or action taken in reliance of it, is prohibited
and maybe
unlawful.
More information about the sr-users
mailing list