[Serusers] SIP Express Router now is commercial????

Greger V. Teigre greger at teigre.com
Tue Sep 13 09:59:40 CEST 2005


AFAIK, Tekelec bought iptelorg.com with its intellectual property 
(commercial extensions/extras/related software to SER) and its employees. 
Iptel.org was NOT part of the deal and is still sponsored by FOKUS 
Fraunhofer (as stated on the iptel.org website).  SER is an independent GPL 
project and Tekelec cannot do anything about that.
    However, iptelorg.com sponsored development resources on the open source 
SER. Tekelec is free to decide to stop this sponsoring. I cannot see how 
this can be in their interest, but if the focus on the development they want 
to do with SER is too far away the open source project, the project may not 
give Tekelec enough value. If this happens, the developers must decide 
whether to continue in their spare time, quit SER development, or look for 
employment with another company willing to sponsor hours on open source SER 
development.  In addition, SER has MANY other developers who were not 
involved at all with iptelorg.com. Of course, as some of the most active 
coders were with iptelorg.com, such a decision may impact SER's development.
    Also, note that the OpenSER project has branched off and is hosted and 
controlled by Voice System.  The Voice System developers are not affected by 
the Tekelec deal.  However, as OpenSER tries to incorporate SER code 
development into its own code base, OpenSER will be equally affected if 
those contributing this SER code are prevented from working on the code in 
their day-time job.

g-)

carlos ivan grajales wrote:
> Hi Guys,
>
> And now what Tekelec bought to iptelorg that it will
> be of SER??? your users list??? and GPL software ???
>
> Sincerely,
>
> CArlos Ivan Grajales M.
> Colombia, South America
>
>
>
> --- serusers-request at lists.iptel.org wrote:
>
>> Send Serusers mailing list submissions to
>> serusers at lists.iptel.org
>>
>> To subscribe or unsubscribe via the World Wide Web,
>> visit
>> http://lists.iptel.org/mailman/listinfo/serusers
>> or, via email, send a message with subject or body
>> 'help' to
>> serusers-request at lists.iptel.org
>>
>> You can reach the person managing the list at
>> serusers-owner at lists.iptel.org
>>
>> When replying, please edit your Subject line so it
>> is more specific
>> than "Re: Contents of Serusers digest..."
>>
>>
>> Today's Topics:
>>
>>    1. I cannot compile "check_from()" method
>> although I load module
>>       "uri" (tulay sazak)
>>    2. Compilation Error on Mac OS (Darwin) - SEMS..
>> (Amos Nungu)
>>    3. call me (harry gaillac)
>>    4. SER + Mediaproxy sl_send_reply: I won't send a
>> reply for
>>       ACK!!  (GT)
>>    5. HELP! duplicate accounting (torres lloyd)
>>    6. Re: SER + Mediaproxy sl_send_reply: I won't
>> send a reply for
>>       ACK!! (Greger V. Teigre)
>>    7. Re: Re: SER + Mediaproxy sl_send_reply: I
>> won't send a reply
>>       for ACK!! (GT)
>>    8. Re: t_check_status in failure_route (Klaus
>> Darilion)
>>    9. Media proxy idle calls. (Vikash Khatuwala)
>>   10. Re: t_check_status in failure_route (Juha
>> Heinanen)
>>   11. Re: t_check_status in failure_route (Andreas
>> Granig)
>>
>>
>>
> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sun, 11 Sep 2005 04:12:08 -0700 (PDT)
>> From: tulay sazak <tulaysazak at yahoo.com>
>> Subject: [Serusers] I cannot compile "check_from()"
>> method although I
>> load module "uri"
>> To: serusers at lists.iptel.org
>> Message-ID:
>> <20050911111208.51148.qmail at web52108.mail.yahoo.com>
>> Content-Type: text/plain; charset=iso-8859-1
>>
>> Hello everbody,
>>
>> I loaded module "uri" and my ser.cfg is as below:
>>
>> .....
>> loadmodule "/usr/local/lib/ser/modules/uri.so"
>> .....
>> if (method=="INVITE") {
>>   if (!radius_proxy_authorize("iptel.org")) {
>>     proxy_challenge("iptel.org", "1");
>>     break;
>>   }
>>
>>   if (!check_from()) {
>>     sl_send_reply("403", "Forbidden");
>>     break;
>>   }
>> }
>> ........
>>
>> When I run ser, it says:
>>
>>  0(10457) find_export: <check_from> not found
>>  0(10457) find_export: <check_from> not found
>>  0(10457) parse error (183,35-36): unknown command,
>> missing loadmodule?
>>
>> Can you see what am I doing wrong ??
>>
>> Thanks in advance
>> Regards
>>
>> Tulay
>>
>>
>>
>>
>>
>>
>>
>>
> ______________________________________________________
>>
>> Yahoo! for Good
>> Watch the Hurricane Katrina Shelter From The Storm
>> concert
>> http://advision.webevents.yahoo.com/shelter
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sun, 11 Sep 2005 15:05:54 +0200
>> From: Amos Nungu <amos.nungu at gmail.com>
>> Subject: [Serusers] Compilation Error on Mac OS
>> (Darwin) - SEMS..
>> To: serusers at lists.iptel.org
>> Message-ID:
>> <86caff8805091106053263560b at mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> I'm installing SEMS-0.9 on Mac OS (Darwin 8.2.0).
>> upon running the make
>> all command, I got an error as shown below
>> -------------------------------------------------
>> # make all
>> make[1]: Nothing to be done for `deps'.
>> g++ -o sems AmApi.o AmAudio.o AmCmd.o AmConfig.o
>> AmEventQueue.o
>> AmIcmpWatcher.o AmMail.o AmPlugIn.o AmRequest.o
>> AmRtpPacket.o
>> AmRtpPacketTracer.o AmRtpScheduler.o AmRtpStream.o
>> AmSdp.o AmServer.o
>> AmSession.o AmSmtpClient.o AmThread.o AmUtils.o
>> EmailTemplate.o
>> SemsConfiguration.o SerClient.o SerDBQuery.o log.o
>> sems.o -lm -ldl
>> -lsocket -lnsl -lpthread
>> /usr/bin/ld: can't locate file for: -lsocket
>> collect2: ld returned 1 exit status
>> make[1]: *** [sems] Error 1
>> make: [all] Error 2 (ignored)
>>
> -------------------------------------------------------
>>
>> Any idea on how to go about it will be great.
>>
>> Regards
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Sun, 11 Sep 2005 19:19:03 +0200 (CEST)
>> From: harry gaillac <gaillacharry at yahoo.fr>
>> Subject: [Serusers] call me
>> To: serusers at lists.iptel.org
>> Message-ID:
>>
> <20050911171904.17161.qmail at web25502.mail.ukl.yahoo.com>
>> Content-Type: text/plain; charset=iso-8859-1
>>
>> hello,
>>
>> Please to call me at for tests.
>>
>> sip:84 at nxs;yi.org
>> or
>> sip:85 at nxs;yi.org
>> or
>> sip:86 at nxs;yi.org
>> or
>> sip:87 at nxs;yi.org
>>
>> Regards
>> Harry
>>
>>
>>
>>
>>
>>
>>
> ___________________________________________________________________________
>>
>> Appel audio GRATUIT partout dans le monde avec le
>> nouveau Yahoo! Messenger
>> Téléchargez cette version sur
>> http://fr.messenger.yahoo.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Sun, 11 Sep 2005 20:11:26 -0800
>> From: "GT" <geotelcom at yahoo.fr>
>> Subject: [Serusers] SER + Mediaproxy sl_send_reply:
>> I won't send a
>> reply for ACK!!
>> To: serusers at lists.iptel.org <serusers at lists.iptel.org>
>> Message-ID: <20050911181312.D169319C6 at fox.iptel.org>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Hello,
>>
> === message truncated ===
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers 




More information about the sr-users mailing list