[Serusers] Radius accounting

[Rosa De Santis]

Hi again Jan.

The way I have the setflag command does not register all messages for 
accounting? I mean: register, invite, bye, etc ?

Thanks
Rosa.


>From: Jan Janak <jan at iptel.org>
>To: Rosa De Santis <rosadesantis at hotmail.com>
>CC: serusers at lists.iptel.org
>Subject: Re: [Serusers] Radius accounting
>Date: Fri, 18 Nov 2005 23:08:16 +0100
>
>Yes, this is what I meant. Could you also post dumps of SIP traffic that
>should have been accounted ?
>
>   Jan.
>
>On 18-11-2005 21:50, Rosa De Santis wrote:
> > Hello. Thanks for your help.
> >
> > This is my ser.cfg.
> > I set log_flag, log_level and radius_flag to 1, and I don't get anything 
>in
> > syslog.
> > This is what you mean?
> >
> > Thanks again.
> > Rosa.
> >
> > ------------------------
> > debug = 9
> > fork=no
> > log_stderror=yes
> >
> > check_via=no	# (cmd. line: -v)
> > dns=no           # (cmd. line: -r)
> > rev_dns=no      # (cmd. line: -R)
> > #port=5060
> > #children=4
> > fifo="/tmp/ser_fifo"
> >
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > loadmodule "/usr/local/lib/ser/modules/acc.so"
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> >
> > modparam("usrloc", "db_mode", 2)
> > modparam("acc", "log_level", 1)
> > modparam("acc", "log_flag", 1)
> > modparam("acc", "radius_config",
> > "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> > modparam("acc", "radius_missed_flag", 2)
> > modparam("acc", "radius_flag", 1)
> > modparam("acc", "service_type", 15)
> > modparam("auth_radius", "radius_config",
> > "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> >
> > route{
> >
> > 	if (!mf_process_maxfwd_header("10")) {
> > 		sl_send_reply("483","Too Many Hops");
> > 		break;
> > 	};
> > 	if (msg:len >=  2048 ) {
> > 		sl_send_reply("513", "Message too big");
> > 		break;
> > 	};
> >
> > 	setflag(1);
> > 	if (!method=="REGISTER") record_route();
> >
> > 	if (loose_route()) {
> > 		# mark routing logic in request
> > 		append_hf("P-hint: rr-enforced\r\n");
> > 		route(1);
> > 		break;
> > 	};
> >
> > 	if (!uri==myself) {
> > 		# mark routing logic in request
> > 		append_hf("P-hint: outbound\r\n");
> > 		route(1);
> > 		break;
> > 	};
> >
> > 	if (uri==myself) {
> >
> > 		if (method=="REGISTER") {
> >
> > 			if (!radius_www_authorize("")) {
> > 			    www_challenge("", "0");
> > 			    break;
> > 			};
> > 			save("location");
> > 			break;
> > 		};
> >
> > 		lookup("aliases");
> > 		if (!uri==myself) {
> > 			append_hf("P-hint: outbound alias\r\n");
> > 			route(1);
> > 			break;
> > 		};
> >
> > 		# native SIP destinations are handled using our USRLOC DB
> > 		if (!lookup("location")) {
> > 			sl_send_reply("404", "Not Found");
> > 			break;
> > 		};
> > 	};
> >
> > 	append_hf("P-hint: usrloc applied\r\n");
> > 	route(1);
> > }
> >
> > route[1]
> > {
> > 	if (!t_relay()) {
> > 		sl_reply_error();
> > 	};
> > }
> >
> > ------------------------
> >
> >
> > >From: Jan Janak <jan at iptel.org>
> > >To: Rosa De Santis <rosadesantis at hotmail.com>
> > >CC: serusers at lists.iptel.org
> > >Subject: Re: [Serusers] Radius accounting
> > >Date: Fri, 18 Nov 2005 21:16:22 +0100
> > >
> > >Did you mark the transaction with correct flag ? Try to configure both
> > >syslog and radius accounting with the same flag and see if you get any
> > >accounting records in syslog.
> > >
> > >  Jan.
> > >
> > >On 18-11-2005 20:04, Rosa De Santis wrote:
> > >> Yes, I set the server IP in authserver and acctserver in the
> > >> radiusclient.conf file in the radiusclient-ng folder.
> > >> I also added the server and secret in the servers file in the same
> > >folder.
> > >> The strange thing is that i'm making authorization to the same Radius
> > >> server, why accounting is not working?
> > >>
> > >> Thanks
> > >> Rosa.
> > >>
> > >>
> > >> >From: Jan Janak <jan at iptel.org>
> > >> >To: Rosa De Santis <rosadesantis at hotmail.com>
> > >> >CC: serusers at lists.iptel.org
> > >> >Subject: Re: [Serusers] Radius accounting
> > >> >Date: Fri, 18 Nov 2005 21:04:26 +0100
> > >> >
> > >> >Did you configure the accounting server in the configuration file of
> > >> >radiusclient-ng ?
> > >> >
> > >> >Do you have correct secret for the server ?
> > >> >
> > >> >  Jan.
> > >> >
> > >> >On 18-11-2005 18:25, Rosa De Santis wrote:
> > >> >> Hello all.
> > >> >>
> > >> >> Please, I am trying to make Radius authorization and accounting 
>using
> > >> >SER
> > >> >> 0.9.3 and radiusclient-ng. I already set all the configuration as 
>the
> > >> >> ser_radius HowTo.
> > >> >> Now, I'm making Radius authorization successfully, but not
> > >accounting, I
> > >> >> don't get anything going out through port 1813.
> > >> >>
> > >> >> The Radius Server is in another machine, i'm configuring only the
> > >radius
> > >> >> client.
> > >> >> Is there other things to do besides the ser_radius howto? Please
> > >help...
> > >> >>
> > >> >> Thanks a lot
> > >> >> Rosa.
> > >> >>
> > >> >>
> > >> >> _______________________________________________
> > >> >> Serusers mailing list
> > >> >> serusers at lists.iptel.org
> > >> >> http://lists.iptel.org/mailman/listinfo/serusers
> > >>
> > >>
> > >> _______________________________________________
> > >> Serusers mailing list
> > >> serusers at lists.iptel.org
> > >> http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers