[Serusers] Radius accounting

[Jan Janak]

By the way -- set fork=yes in the config file. fork=no is mainly for
debugging and some things may not work correctly in no-fork mode.

  Jan.

On 18-11-2005 21:50, Rosa De Santis wrote:
> Hello. Thanks for your help.
> 
> This is my ser.cfg.
> I set log_flag, log_level and radius_flag to 1, and I don't get anything in 
> syslog.
> This is what you mean?
> 
> Thanks again.
> Rosa.
> 
> ------------------------
> debug = 9
> fork=no
> log_stderror=yes
> 
> check_via=no	# (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
> 
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> 
> modparam("usrloc", "db_mode", 2)
> modparam("acc", "log_level", 1)
> modparam("acc", "log_flag", 1)
> modparam("acc", "radius_config", 
> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> modparam("acc", "radius_missed_flag", 2)
> modparam("acc", "radius_flag", 1)
> modparam("acc", "service_type", 15)
> modparam("auth_radius", "radius_config", 
> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> 
> route{
> 
> 	if (!mf_process_maxfwd_header("10")) {
> 		sl_send_reply("483","Too Many Hops");
> 		break;
> 	};
> 	if (msg:len >=  2048 ) {
> 		sl_send_reply("513", "Message too big");
> 		break;
> 	};
> 
> 	setflag(1);
> 	if (!method=="REGISTER") record_route();
> 
> 	if (loose_route()) {
> 		# mark routing logic in request
> 		append_hf("P-hint: rr-enforced\r\n");
> 		route(1);
> 		break;
> 	};
> 
> 	if (!uri==myself) {
> 		# mark routing logic in request
> 		append_hf("P-hint: outbound\r\n");
> 		route(1);
> 		break;
> 	};
> 
> 	if (uri==myself) {
> 
> 		if (method=="REGISTER") {
> 
> 			if (!radius_www_authorize("")) {
> 			    www_challenge("", "0");
> 			    break;
> 			};
> 			save("location");
> 			break;
> 		};
> 
> 		lookup("aliases");
> 		if (!uri==myself) {
> 			append_hf("P-hint: outbound alias\r\n");
> 			route(1);
> 			break;
> 		};
> 
> 		# native SIP destinations are handled using our USRLOC DB
> 		if (!lookup("location")) {
> 			sl_send_reply("404", "Not Found");
> 			break;
> 		};
> 	};
> 
> 	append_hf("P-hint: usrloc applied\r\n");
> 	route(1);
> }
> 
> route[1]
> {
> 	if (!t_relay()) {
> 		sl_reply_error();
> 	};
> }
> 
> ------------------------
> 
> 
> >From: Jan Janak <jan at iptel.org>
> >To: Rosa De Santis <rosadesantis at hotmail.com>
> >CC: serusers at lists.iptel.org
> >Subject: Re: [Serusers] Radius accounting
> >Date: Fri, 18 Nov 2005 21:16:22 +0100
> >
> >Did you mark the transaction with correct flag ? Try to configure both
> >syslog and radius accounting with the same flag and see if you get any
> >accounting records in syslog.
> >
> >  Jan.
> >
> >On 18-11-2005 20:04, Rosa De Santis wrote:
> >> Yes, I set the server IP in authserver and acctserver in the
> >> radiusclient.conf file in the radiusclient-ng folder.
> >> I also added the server and secret in the servers file in the same 
> >folder.
> >> The strange thing is that i'm making authorization to the same Radius
> >> server, why accounting is not working?
> >>
> >> Thanks
> >> Rosa.
> >>
> >>
> >> >From: Jan Janak <jan at iptel.org>
> >> >To: Rosa De Santis <rosadesantis at hotmail.com>
> >> >CC: serusers at lists.iptel.org
> >> >Subject: Re: [Serusers] Radius accounting
> >> >Date: Fri, 18 Nov 2005 21:04:26 +0100
> >> >
> >> >Did you configure the accounting server in the configuration file of
> >> >radiusclient-ng ?
> >> >
> >> >Do you have correct secret for the server ?
> >> >
> >> >  Jan.
> >> >
> >> >On 18-11-2005 18:25, Rosa De Santis wrote:
> >> >> Hello all.
> >> >>
> >> >> Please, I am trying to make Radius authorization and accounting using
> >> >SER
> >> >> 0.9.3 and radiusclient-ng. I already set all the configuration as the
> >> >> ser_radius HowTo.
> >> >> Now, I'm making Radius authorization successfully, but not 
> >accounting, I
> >> >> don't get anything going out through port 1813.
> >> >>
> >> >> The Radius Server is in another machine, i'm configuring only the 
> >radius
> >> >> client.
> >> >> Is there other things to do besides the ser_radius howto? Please 
> >help...
> >> >>
> >> >> Thanks a lot
> >> >> Rosa.
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Serusers mailing list
> >> >> serusers at lists.iptel.org
> >> >> http://lists.iptel.org/mailman/listinfo/serusers
> >>
> >>
> >> _______________________________________________
> >> Serusers mailing list
> >> serusers at lists.iptel.org
> >> http://lists.iptel.org/mailman/listinfo/serusers
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers