[Serusers] ser 0.9.4 radius_auth problem
Klaus Darilion
klaus.mailinglists at pernau.at
Tue Nov 8 11:00:52 CET 2005
Try starting ser with "ser -E" and it should tell you more about the
problem.
btw: why do you want to use auth_db and auth_radius concurrently?
Usually you only use one of them.
regard
klaus
Pham Ngoc Khanh wrote:
> Dear All,
>
> I have just followed the ser radius instructions to configure and
> install ser-0.9.4 from source in my redhat 9 machine. Whenever I enable
> the auth_radius module by inserting the following lines in my ser.cfg
>
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
>
> modparam("auth_db", "password_column", "password")
> modparam("auth_radius", "radius_config",
> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
>
> I got the error "bad config file (3 errors)" in the process of starting ser.
> But ser will start smoothly when I commented these lines.
>
> It takes me a lot of time. Pls help me to resolve this problem.
>
> Here is my full ser.cfg
>
> #
> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=9
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
> modparam("auth_radius", "radius_config",
> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (msg:len >= 2048 ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> if (!method=="REGISTER") record_route();
>
> # subsequent messages withing a dialog should take the
> # path determined by record-routing
> if (loose_route()) {
> # mark routing logic in request
> append_hf("P-hint: rr-enforced\r\n");
> route(1);
> break;
> };
>
> if (!uri==myself) {
>
> # mark routing logic in request
> append_hf("P-hint: outbound\r\n");
> route(1);
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> # if (!radius_www_authorize("iptel.org",
> "subscriber")) {
> # www_challenge("iptel.org", "0");
> # break;
> # };
>
> save("location");
> break;
> };
>
> lookup("aliases");
> if (!uri==myself) {
> append_hf("P-hint: outbound alias\r\n");
> route(1);
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> append_hf("P-hint: usrloc applied\r\n");
> route(1);
> }
>
> route[1]
> {
> # send it out now; use stateful forwarding as it works reliably
> # even for UDP2TCP
> if (!t_relay()) {
> sl_reply_error();
> };
> }
>
> Thank you.
> Best regards,
>
> Pham Ngoc Khanh
>
> ------------------------------------------------------------------------
> I am using the free version of SPAMfighter for private users.
> It has removed 554 spam emails to date.
> Paying users do not have this message in their emails.
> Try SPAMfighter <http://www.spamfighter.com/Product_Info.asp?> for free now!
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list