[Users] Help with NATHelper module and fix_nated_contact() function

[Daniel-Constantin Mierla]

Hello,

On 11/09/05 00:31, Klaus Darilion wrote:
> Hi!
>
> Make sure your function is really called. Put log statements before 
> and after the fix_nated_contact function and watch syslog 
> (/var/log/syslog ) for the log statements, e.g.:
>
>     log("before fix natted contact\n");
>     fix_nated_contact();
>     log("after fix natted contact\n");
>
> you could also use xlog and pseudo variables to log the contact before 
> and afterwards the changes.
the change will not be reflected in the pseudo-variable corresponding to 
contact header. It is kept inside openser as a diff to the old content 
of the message.

Cheers,
Daniel
>
> regards
> klaus
>
> Anthony Chapellier wrote:
>> Hi,
>>
>> NatHelper documentation says fix_nated_contact is rewriting contact 
>> header with request source address:port but it seems the function 
>> doesn't work properly with my SER config...
>>
>> Indeed, when you analyze a SIP Request Packet you have the following :
>>
>> Message Header :
>> Contact : <sip:352621 at 192.170.10.32:5060>        #192.170.10.32:5060 
>> is the private IP/Port
>>
>> and if this function was working properly, I understand you should 
>> get the following :
>>
>> Message Header :
>> Contact: <sip:352621 at 80.114.25.8:2014>      #80.114.25.8:2014 is the 
>> public IP/Port
>>
>> But the SIP packets that are getting out from SER Proxy to SIP 
>> Registrar Server have not their contact header field modified with 
>> public IP/Port...
>>
>> So, is the function not working ? or something else ?
>>
>> Thanks,
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>