[Serusers] Re: error in compile ser-0.9.0

[Jan Janak]

There is no problem according to the log below -- the module seems to
compile fine. The messages about missing .d files are not an issue --
the files will be created on the fly.
 
  Jan.

On 25-05-2005 03:35, Kamran Ahmad wrote:
> hello
> 
> i already have
> fifo="/tmp/ser_fifo"
> 
> in my ser.cfg
> 
> there is some problem in compile
> 
> ------------------------------------------------------
> make[1]: Entering directory `/ser-0.9.0/modules/lcr'
> ../../Makefile.rules:77: fifo.d: No such file or
> directory
> ../../Makefile.rules:77: lcr_mod.d: No such file or
> directory
> make[1]: Leaving directory `/ser-0.9.0/modules/lcr'
> make[1]: Entering directory `/ser-0.9.0/modules/lcr'
> gcc -fPIC -DPIC -g -O9 -funroll-loops  -Wcast-align 
> -Wall   -minline-all-stringops -malign-double
> -falign-loops -mtune=athlon 
> -I/opt/axxany/siprouter/radiusclient/include   
> -DNAME='"ser"' -DVERSION='"0.9.1"' -DARCH='"i386"'
> -DOS='"linux"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386
> -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"'
> -DPKG_MALLOC -DSHM_MEM  -DSHM_MMAP -DDNS_IP_HACK
> -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
> -DDBG_QM_MALLOC  -DFAST_LOCK -DADAPTIVE_WAIT
> -DADAPTIVE_WAIT_LOOPS=1024  -DHAVE_GETHOSTBYNAME2
> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD
> -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL
> -DHAVE_ALLOCA_H -c fifo.c -o fifo.o
> gcc -fPIC -DPIC -g -O9 -funroll-loops  -Wcast-align 
> -Wall   -minline-all-stringops -malign-double
> -falign-loops -mtune=athlon 
> -I/opt/axxany/siprouter/radiusclient/include   
> -DNAME='"ser"' -DVERSION='"0.9.1"' -DARCH='"i386"'
> -DOS='"linux"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386
> -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"'
> -DPKG_MALLOC -DSHM_MEM  -DSHM_MMAP -DDNS_IP_HACK
> -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
> -DDBG_QM_MALLOC  -DFAST_LOCK -DADAPTIVE_WAIT
> -DADAPTIVE_WAIT_LOOPS=1024  -DHAVE_GETHOSTBYNAME2
> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD
> -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL
> -DHAVE_ALLOCA_H -c lcr_mod.c -o lcr_mod.o
> gcc -shared -L/opt/axxany/siprouter/radiusclient/lib
> -Wl,-O2 -Wl,-E   fifo.o lcr_mod.o    -o lcr.so
> -----------------------------------------------------
> 
> 
> 
> >Do you have the following line in your ser.cfg:
> >
> >fifo=/tmp/ser_fifo
> >
> >
> >Try to configure it, and see what happens
> >
> >
> >On Tue, 24 May 2005 06:43:04 -0700 (PDT)
> >Kamran Ahmad <p_kami at yahoo.com> wrote:
> >
> >> fifo=/tmp/ser_fifo
> >
> >-- 
> >Felipe Martins
> >Mundivox Communications
> >Tecnologia e Projetos
> >fmartins at mundivox.com
> >
> >Tel.: +55 +21 +3820 8839
> >Cel.: +55 +21 +9823 8602
> >Fax.: +55 +21 +3820 8844
> >www.mundivox.com
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new Resources site
> http://smallbusiness.yahoo.com/resources/
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers