[Serusers] avp_radius and avpops

[Greger V. Teigre]

Ricardo,
Yes, you're right. I didn't realize that this was a avp_load_radius avp, so 
I didn't think about mentioning it.  Write the section you feel is necessary 
for the README and post it to serdev.  All the developers are delighted to 
get documentation help :-)
g-)

Ricardo Martinez wrote:
> Yes.
> I noticed that the variable used by the avp_load_radius("caller") to
> store the answer from the RADIUS server is in fact the one i defined
> first (var1), but is has a prefix called   "caller_"  , so the
> variable is finally : "caller_var1".  Jackpot!.
> So i used this in my ser.cfg:
>
> if( !avp_load_radius("caller")) {
>       xlog("L_INFO", "time [%Tf] FAIL AVP_LOAD_RADIUS!\n");
> };
> if( !avp_pushto("$ruri", "s:caller_var1/g")) {
> xlog("L_INFO", "time [%Tf] FAIL avp_pushto()!\n");
> };
>
> Thanks Greg for your help.
> Just one more thing.  This could be indicated in the module's README,
> i think is an important thing that a user should know.
>
> Regards!!.
> Ricardo Martinez.-
>
>> -----Mensaje original-----
>> De: Greger V. Teigre [mailto:greger at teigre.com]
>> Enviado el: Viernes, 27 de Mayo de 2005 3:57
>> Para: Ricardo Martinez; serusers at lists.iptel.org
>> Asunto: Re: [Serusers] avp_radius and avpops
>>
>>
>> Do the debugging dance, so that you can verify what the calls
>> to avp_* do...
>> g-)
>>
>> Ricardo Martinez wrote:
>>> Hello Greg
>>> Thanks for your answer.
>>> I made the change but it seems not to do anything....
>>> Can someone help me here?
>>>
>>> Thanks in advance
>>>
>>> Regards
>>> Ricardo.-
>>>
>>>> -----Mensaje original-----
>>>> De: Greger V. Teigre [mailto:greger at teigre.com]
>>>> Enviado el: Miércoles, 25 de Mayo de 2005 16:24
>>>> Para: Ricardo Martinez; serusers at lists.iptel.org
>>>> Asunto: Re: [Serusers] avp_radius and avpops
>>>>
>>>>
>>>>>                if( !avp_pushto("$RURI", "s:var1/g")) {
>>>> replace with:
>>>> "s:$var1/g"
>>>> I don't know about the case sensivtivity of destination, I
>>>> always use lower
>>>> case...
>>>> g-)
>>>>
>>>> Ricardo Martinez wrote:
>>>>> Hello List.
>>>>> I have a question regarding the use of avp_radius and avpops.  I'm
>>>>> using avp_radius to obtain an AVP value from my database
>> via radius.
>>>>> What i what to do is replace this value for the RURI.
>>>>> Here i have a couple of questions.
>>>>> 1.- The value returned by the avp_radius (the SIP-AVP) where is
>>>>> stored ?  It suppose that the SIP-AVP returned by radius
>>>> has the form
>>>>> of "name:value". That "name" refers to the name of what?.
>>>>> For example i'm returning :
>>>> "var1:sip:1234567 at mydomain.com".  What i
>>>>> see in the debug is :
>>>>>
>>>>> avp_load_user: AVP 'var1'='sip:1234567 at mydomain.com' has
>> been added
>>>>>
>>>>> This is what i got in my ser.cfg (a snippet).
>>>>>
>>>>> if (method=="INVITE" ||  method=="CANCEL") {
>>>>>                if( !avp_load_radius("caller")) {
>>>>>                        log (1, "AVP_RADIUS: Fail on
>> avp_radius\n");
>>>>>                };
>>>>
>>>>>
>>>>>                if( !avp_pushto("$RURI", "s:var1/g")) {
>>>>>                        log (1, "AVPOPS: Fail on AVPOPS\n");
>>>>>                };
>>>>>        };
>>>>>
>>>>> Again the debug = 9 .
>>>>>
>>>>> 6(23815) avp_load_user: AVP
>>>> 'var1'='sip:1234567 at mydomain.com' has been
>>>>> added
>>>>> 6(23815) qm_free(0x8123400, 0x8166ccc), called from avp_radius.c:
>>>>> load_avp_user(344)
>>>>> 6(23815) qm_free: freeing frag. 0x8166cb4 alloc'ed from
>>>>> avp_radius.c: load_avp_user(330)
>>>>> 6(23815) DEBUG:avpops:pushto_avp: no avp found
>>>>> 6(23815) AVPOPS: Fail on AVPOPS
>>>>>
>>>>> What i'm doing wrong?
>>>>> Thanks!
>>>>>
>>>>> Regards
>>>>> Ricardo Martinez
>>>>>
>>>>> _______________________________________________
>>>>> Serusers mailing list
>>>>> serusers at lists.iptel.org
>>>>> http://lists.iptel.org/mailman/listinfo/serusers