[Serusers] Can’t enable accounting with SER

Tran Tien Duc ttduc62 at yahoo.com
Fri May 27 21:25:57 CEST 2005


Hi All,

 

I really need your help.

I have setup the ser-0.8.14, 

uname –a is:

Linux lnx01 2.6.9-1.667smp #1 SMP Tue Nov 14:59:52 EST 2004 i686 i386 GNU/Linux

 

I have also setup Radiusclient-0.4.8 and Freeradius-1.0.2.

I've followed all the steps in this tutorial

http://www.iptel.org/ser/doc/ser_radius/ser_radius.html

 

The installing don’t have any error.

 

I tested on LAN with  1 server 192.168.10.1 and 2 workstations 192.168.10.2 and 192.168.10.3

 

However, I have received error when start ser.

This is my error:

 

0(7389) find_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so]

0(7389) ERROR: acc: can't get code for the Failed attribute value

0(7389) init_mod(): Error while initializing module acc

ERROR: error while initializing modules

0(7389) DEBUG: tm_shutdown : start

0(7389) DEBUG: tm_shutdown : empting DELETE list

 

I should be most grateful to receive your help.

 

Best regards,

Tran Tien Duc

 

 

ser.cfg

 

debug=8

fork=no

log_stderror=yes

 

 

check_via=no            # (cmd. line: -v)

dns=no           # (cmd. line: -r)

rev_dns=no      # (cmd. line: -R)

#port=5060

#children=4

fifo="/tmp/ser_fifo"

 

# ------------------ module loading ----------------------------------

 

# Uncomment this if you want to use SQL database

loadmodule "/usr/local/lib/ser/modules/mysql.so"

 

loadmodule "/usr/local/lib/ser/modules/sl.so"

loadmodule "/usr/local/lib/ser/modules/tm.so"

 

loadmodule "/usr/local/lib/ser/modules/rr.so"

loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/lib/ser/modules/registrar.so"

 

# Uncomment this if you want digest authentication

# mysql.so must be loaded !

loadmodule "/usr/local/lib/ser/modules/auth.so"

 

loadmodule "/usr/local/lib/ser/modules/acc.so"

 

loadmodule "/usr/local/lib/ser/modules/auth_db.so"

 

loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

 

loadmodule "/usr/local/lib/ser/modules/uri_radius.so"

 

loadmodule "/usr/local/lib/ser/modules/group_radius.so"

 

# ----------------- setting module-specific parameters ---------------

 

# -- usrloc params --

 

#modparam("usrloc", "db_mode",   0)

 

# Uncomment this if you want to use SQL database 

# for persistent storage and comment the previous line

 

modparam("usrloc", "db_mode", 2)

 

modparam("usrloc","db_url","mysql://ser:heslo@localhost/ser")

 

# -- auth params --

# Uncomment if you are using auth module

#

modparam("auth_db", "calculate_ha1", yes)

#

# If you set "calculate_ha1" parameter to yes (which true in this config), 

# uncomment also the following parameter)

#

modparam("auth_db", "password_column", "password")

 

# -- rr params --

# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)

 

 

modparam("acc","db_url","mysql://ser:heslo@localhost/ser")

 

modparam("acc","db_flag",1)

 

modparam("acc","log_level",1)

 

modparam("acc","log_flag",1)

 

modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")

 

modparam("acc","radius_flag",1)

 

modparam("acc","radius_missed_flag",2)

 

 

 

# -------------------------  request routing logic -------------------

 

# main routing logic

 

route{

 

            # initial sanity checks -- messages with

            # max_forwards==0, or excessively long requests

            if (!mf_process_maxfwd_header("10")) {

                        sl_send_reply("483","Too Many Hops");

                        break;

            };

            if ( msg:len > max_len ) {

                        sl_send_reply("513", "Message too big");

                        break;

            };

 

            # we record-route all messages -- to make sure that

            # subsequent messages will go through our proxy; that's

            # particularly good if upstream and downstream entities

            # use different transport protocol

            record_route(); 

            # loose-route processing

            if (loose_route()) {

                        t_relay();

                        break;

            };

            setflag(1);

                                    

            if (method=="INVITE") 

            record_route();

             

            # forward to current uri now; use stateful forwarding; that

            # works reliably even if we forward from TCP to UDP

            if (!t_relay()) {

                        sl_reply_error();

                        break;

            };

}

 


		
---------------------------------
Yahoo! Mail Mobile
 Take Yahoo! Mail with you! Check email on your mobile phone.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050527/a9cee594/attachment.htm>


More information about the sr-users mailing list