Fwd: RES: [Serusers] Cisco 3640 X SER X PSTN

[Welesley Sibelson Dias]

Many thks Jose Ricardo  and "Ser Users" thks for your attetion
more one time Jose Ricardo
i have  other problems now ahahahahahahah
my call hang up and dont voice works now
the caller rings e accept but  cisco send me byes
i send ethereal log to you  into anex

my IP is

SER
200.184.153.54

Cisco
200.184.152.129

and
Phone Voip
200.184.153.52

thks a lot

this message below is in Portuguese:
Muito Obrigado Jose Ricardo
Falew pela forca
desculpe meu pessimo ingles

----------  Mensagem reenviada  ----------

Subject: RES: [Serusers] Cisco 3640 X SER X PSTN
Date: Qui 19 Mai 2005 13:04
From: Jose Ricardo Maia Moraes <jrm at uol.com.br>
To: serusers at lists.iptel.org

Hi,

I use R2 Digital on all of my AS5300 connected to PABX Nortel, Lucent and
some carriers. Look the sample of my config:

controller E1 0
 framing NO-CRC4
 clock source line primary
 ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
 cas-custom 0
  country brazil
  metering
  category 2
  answer-signal group-b 1

voice-port 0:0
 compand-type a-law
 cptone BR

dial-peer voice 10 pots
 destination-pattern xxx
 direct-inward-dial
 port 0:0

Good luck.

-----Mensagem original-----
De: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] Em nome
de Welesley Sibelson Dias
Enviada em: quinta-feira, 19 de maio de 2005 06:33
Para: serusers at lists.iptel.org
Assunto: [Serusers] Cisco 3640 X SER X PSTN

Hi All
I have try connect one E1  using SER and CISCO 3640 but i have some problems

my PSTN Carrier Need Number for "A" but i don't send this , i  need to
complete calls in my carrier.
Please have someone using cisco in R2 Digital send my one example of cfg .
thks a lot

-------------- next part --------------
A non-text attachment was scrubbed...
Name: cisco.ethereal.gz
Type: application/x-gzip
Size: 2469 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050519/1b7e875d/attachment.bin>