[Serusers] ACC into MySQL: How to config ser to log gw messages to bill properly?

[Jose Bertuzzi]

Hello guys; I have everything in place to acc into
mysql. I am already logging some BYEs, INVITEs and
ACKs.

Where do I have to place the setflag statement to
properly log messages from and/to gw 66.166.166.66
only?

My ser.cfg is as follows:


# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters
------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
#fifo_mode=0666


# ------------------ module loading
----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
#loadmodule "/usr/local/lib/ser/modules/group.so"


# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters
---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)


# -- acc params --

modparam("acc", "db_url",
"mysql://ser:heslo@localhost/ser")
#modparam("acc", "log_level", 1)
#modparam("acc", "log_flag", 1)
modparam("acc", "db_flag", 1)



# -------------------------  request routing logic
-------------------

# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long
requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too
big");
                break;
        };

        # we record-route all messages -- to make sure
that
        # subsequent messages will go through our
proxy; that's
        # particularly good if upstream and downstream
entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };

        # if the request is for other domain use
UsrLoc
        # (in case, it does not work, use the
following command
        # with proper names and addresses in it)
        if (uri=~"justser.com") {

                if (src_ip==66.166.166.66 and
method=="INVITE") { ## Llamadas desde PSTN
                        forward(uri:host, uri:port);  
           ##
                        break;                        
           ##
                };                                    
           ##

           
                if (method=="REGISTER") {

# Uncomment this if you want to use digest
authentication
                        if
(!www_authorize("justser.com", "subscriber")) {
                               
www_challenge("justser.com", "0");
                                break;
                        };

                        save("location");
                        break;
                };

               

                if
(uri=~"^sip:1305[0-9]*@justser.com") {    ##
                        prefix("3000#");              
            ##
                       
rewritehostport("66.166.166.66:5060");     ##
TERMINATION
                        forward(uri:host, uri:port);  
            ## AREA CODE 305
                        #setflag(1);				   ##
                        break;                        
            ##
                };                                    
            ##


                if
(uri=~"^sip:1786[0-9]*@justser.com") {    ##
                        prefix("3000#");              
            ##
                       
rewritehostport("66.166.166.66:5060");     ##
TERMINATION
                        forward(uri:host, uri:port);  
            ## AREA CODE 786
                        break;                        
            ##
                };                                    
            ##




                # native SIP destinations are handled
using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not
Found");
                        break;
                };
        };
        # forward to current uri now; use stateful
forwarding; that
        # works reliably even if we forward from TCP
to UDP

        setflag(1);

        if (!t_relay()) {
                sl_reply_error();
        };

}
 


		
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html