[Serusers] Can't restart my SER after eidting 'ser.cfg'
eric quek
ericquek2002 at yahoo.com.sg
Thu Mar 10 08:08:24 CET 2005
Hi All,
Im a new user who is still learning.
Error: unable to restart the SER using 'service ser
restart' in the terminal after eidting the 'ser.cfg'
file. Below was the result shown in the terminal.
>From terminal: Stopping ser: [FAIL]
Starting ser: [OK]
Seem like SER just wont stop even using 'service ser
stop'. Using 'service start' is ok.
Pls help....
This is my OS:
Linux ISPL-PC-0034 2.4.20-8 #1 Thu Mar 13 17:54:28 EST
2003 i686 i686 i386 GNU/Linux
ser distribution:
ser-0.8.12-0.i386.rpm
ser-0.8.12-0.src.rpm
ser-debuginfo-0.8.12-0.i386.rpm
ser-jabber-0.8.12-0.i386.rpm
ser-mysql-0.8.12-0.i386.rpm
ser-radius-0.8.12-0.i386.rpm
ser build:
version: ser 0.8.12 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE,
DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144,
MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.168 2003/10/12 15:09:08 andrei
Exp $
main.c compiled on 17:37:06 Nov 21 2003 with gcc 3.2
ser config:
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
listen=172.16.220.133
listen=127.0.0.1
alias="sip.nyp.edu.sg"
alias=172.16.220.133
alias=127.0.0.1
check_via=yes # (cmd. line: -v)
dns=yes # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
loadmodule "/usr/lib/ser/modules/acc.so"
loadmodule "/usr/lib/ser/modules/exec.so"
loadmodule "/usr/lib/ser/modules/group.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/print.so"
loadmodule "/usr/lib/ser/modules/textops.so"
loadmodule "/usr/lib/ser/modules/uri.so"
loadmodule "/usr/lib/ser/modules/msilo.so"
loadmodule "/usr/lib/ser/modules/vm.so"
# ----------------- setting module-specific parameters
---------------
# -- tm params --
modparam("tm", "fr_timer", 12)
modparam("tm", "fr_inv_timer", 24)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -- usrloc params --
#2 enables write-back to persistent mysql storage for
speed
#disable=0, write-through=1
modparam("usrloc", "db_mode", 2)
#minimize write back window - default is 60 seconds
modparam("usrloc", "timer_interval", 120)
#database location
modparam("usrloc", "db_url",
"sql://ser:heslo@localhost/ser")
# -- auth params --
#database location
modparam("auth_db", "db_url",
"sql://ser:heslo@localhost/ser")
#allows clear text password in the mysql database
modparam("auth_db", "calculate_ha1", yes)
#name of password column in mysql database
modparam("auth_db", "password_column", "password")
# -- acc params --
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
# -- msilo params --
modparam("msilo", "db_table", "silo")
# ------------------------- request routing logic
-------------------
# main routing logic
route{
#checks messages with max_forwards==0
if (!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many Hops");
break;
};
#or excessively long requests
if ( msg:len > max_len )
{
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;
that's
# particularly good if upstream and downstream
entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route())
{
t_relay();
break;
};
#labeled all transaction for accounting
setflag(1);
#record-route INVITES to make sure BYEs will visit
our server too
if (method=="INVITE") record_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following
command
# with proper names and addresses in it)
if (uri==myself)
{
if (method=="REGISTER")
{
#make sure that users don't register infinite loops
if(search("^(Contact|m):.*@(172\.16\.220\.133|(proxy\.)?sip\.nyp\.edu\.sg)"))
{
log(1, "LOG: alert: someone trying to set
aor==contact\n");
sl_send_reply("476", "no server address in
contacts allowed");
break;
}
#Uncomment this if you want to use digest
authentication
#if (!www_authorize("iptel.org", "subscriber"))
#{
# www_challenge("iptel.org", "0");
# break;
#};
save("aliases");
save("location");
log("REGISTER received -> dumping messages with
MSILO\n");
#MSILO - dumping user's offline messages
if (m_dump())
{
log("MSILO: offline messages dumped - if they
were\n");
}
else
{
log("MSILO: no offline messages dumped\n");
};
break;
};
# native SIP destinations are handled using our
USRLOC DB
if (!lookup("location"))
{
if (! t_newtran())
{
sl_reply_error();
break;
};
if (!method=="MESSAGE")
{
if (!t_reply("404", "not found on LDAP or SER"))
{
sl_reply_error();
};
break;
};
log("MESSAGE received -> storing using MSILO\n");
# MSILO - storing as offline message
if (m_store("0"))
{
log("MSILO: offline message stored \n");
if (!t_reply("202", "accepted for later
delivery"))
{
sl_reply_error();
};
}
else
{
log("MSILO: offline message NOT stored\n");
if (!t_reply("503", "service unavailable"))
{
sl_reply_error();
};
};
break;
sl_send_reply("404", "not found on LDAP or SER");
break;
};
#if the downstream UA does not support MESSAGE
requests
#go to failure_route[1]
t_on_failure("1");
t_relay();
break;
#native SIP destinations are handled using our
USRLOC DB
if (!lookup("location"))
{
if (!exec_dset("/etc/ser/sipldap"))
{
sl_send_reply("404", "not found on LDAP or SER");
break;
}
else
{
log(1, "sipldap call");
};
};
};
setflag(3);
# forward to current uri now; use stateful
forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay())
{
sl_reply_error();
break;
};
#does user wish redirection on no availability?
#(is he in the voicemail (ser->grp) group?)
if (is_user_in("Request-URL", "voicemail"))
{
t_on_failure("4");
setflag(1);
};
}
failure_route[1] {
#forwarding failed -- check if the request was a
MESSAGE
if (!method=="MESSAGE")
{
break;
};
log(1, "MSILO: the downstream UA does not support
MESSAGE requests ...\n");
#we have changed the R-URI with the contact address
-- ignore it now
if (m_store("1"))
{
log("MSILO: offline message stored\n");
t_reply("202", "accepted for later delivery");
}
else
{
log("MSILO: offline message NOT stored\n");
t_reply("503", "service unavailable");
};
}
failure_route[4]
{
append_branch("sip:80000 at sip.nyp.edu.sg");
append_urihf("CC-Diversion: ", "\r\n");
append_hf("P-hint: OFFLINE-VOICEMAIL\r\n");
t_relay();
}
Regards,
EricQ
__________________________________________________
Do You Yahoo!?
Download the latest ringtones, games, and more!
http://sg.mobile.yahoo.com
More information about the sr-users
mailing list