[Serusers] hi all, newbie problem probably
Mohammad Khan
info at beeplove.com
Thu Mar 3 18:11:54 CET 2005
First of all, I am not SER expert.
From my last couple of weeks learning I will suggest below:
Olivier.taylor wrote:
> Thx to be so fast,
> here is my ser.cfg
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser" #
<--------- if you want fifo db
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #
<---- you need define this, if your database is different than default
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this
> config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1) # <----------- i think you want this
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
> alias="finalcut.be"
> alias="linux.finalcut.be"
> alias="82.146.123.252"
its better to put above three lines in global section
if your computer ip is 82.146.123.252
you should have
listen=82.146.123.252
alias="finalcut.be"
alias="linux.finalcut.be"
For the rest of your config file, i really can't help.
I am also learing to write route logic.
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("70")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route(); # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("82.146.123.252", "subscriber")) {
> www_challenge("82.146.123.252", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
>
>
>
>
>
>
>
>
>
>
>
> Mohammad Khan wrote:
>
>> you will need something like this in you ser.cfg
>> modparam("auth_db", "db_url", "mysql://ser:heslo@localhost/ser")
>> modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
>>
>> I can tell you better if I could see your ser.cfg
>>
>> MOhammad
>>
>>
>> Olivier.taylor wrote:
>>
>>> I installed ser on a linux box centos 3.4
>>> I use mysql 4.10
>>>
>>> Furthermore I am noob on Linux and Ser :(
>>>
>>> I get this messages at boot in the messages file
>>> Impossible the for an UA to connect to ser...
>>>
>>> Help is welcome,
>>> regards,
>>>
>>> Olivier
>>>
>>> Mar 3 17:12:19 linux ser: WARNING: could not rev. resolve
>>> 82.146.123.252
>>> Mar 3 17:12:19 linux ser: Listening on
>>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060
>>> Mar 3 17:12:19 linux ser: 82.146.123.252
>>> [82.146.123.252]:5060
>>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060
>>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:*
>>> finalcut.be:*
>>> Mar 3 17:12:19 linux ser: Listening on
>>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060
>>> Mar 3 17:12:19 linux ser: 82.146.123.252
>>> [82.146.123.252]:5060
>>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060
>>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:*
>>> finalcut.be:*
>>> Mar 3 17:12:19 linux ser: Listening on
>>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060
>>> Mar 3 17:12:19 linux ser: 82.146.123.252
>>> [82.146.123.252]:5060
>>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060
>>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:*
>>> finalcut.be:*
>>> Mar 3 17:12:19 linux ser: ser startup succeeded
>>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: connect_db(): Can't
>>> connect to local MySQL server through socket
>>> '/var/lib/mysql/mysql.sock' (2)
>>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: db_init(): Error while
>>> trying to connect database
>>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: mod_init(): Error while
>>> connecting database
>>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: init_mod(): Error while
>>> initializing module usrloc
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org
>>> http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
>>
>>
Let me know, if it improves the situation.
Good Luck
MOhammad
More information about the sr-users
mailing list