[Serusers] How to config the ser?where can I find the instruction?

[Alan bus]

I am new to using SER.I installed ser-0.8.14_src.tar.gz on 
Linux-redhat-2.4.18-14 with 
mysql-standard-5.0.6-beta-linux-i686.tar.gz.Mysql can run successfully.The 
following is what
I have done:(the main directory:/usr/local/src/ser-0.8.14)

step 1:make all
step 2:ser_mysql.sh create
The following are the commands and the error messages:

[root at redhat scripts]# ser_mysql.sh create
MySql password for root: 
Domain (realm) for the default user 'admin': blrc.com

./ser_mysql.sh: line 1: gen_ha1: command not found
HA1 calculation failed

what's the matter?What should I do the next?Could you help me?

Here are the ser.cfg:
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
                        if (!www_authorize("iptel.org", "subscriber")) {
                                www_challenge("iptel.org", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };

}

thx!

_________________________________________________________________
享用世界上最大的电子邮件系统― MSN Hotmail。  http://www.hotmail.com