[Serusers] Multiple Domain Problem ser0.9.2

[Rosario Pingaro]

I added just to try the domains to alias but it was not the problem, infact 
alias only tell ser what domain hav to be included in "myself", I 
accomplished that having the domain in my linux hosts file.

For sure I added the user in the form you specified. So I have all the ser 
db lokking good with the domain column filled.

But the simptoms push me to think that the registrar module is not working 
good. In fact also including modparam("registrar", "case_sensitive", 1)
the digest authentication seems case insesitive!!!

Any other HELP?

Thanks

Rosario

----- Original Message ----- 
From: "Juan Priotti" <jpriotti at gmail.com>
To: "Rosario Pingaro" <rpingar at italycom.it>
Sent: Sunday, June 12, 2005 12:49 PM
Subject: Re: [Serusers] Multiple Domain Problem ser0.9.2


>I think you would need to add aliases in ser.cfg in this way:
>
> fifo="/tmp/ser_fifo"
> alias=domain1.com domain2.com
>
> so authentication will not fail.
> also when adding users:
>
> serctl add user1 at domain1.com "passwd" "email"
>
> ----- Original Message ----- 
> From: Rosario Pingaro
> To: serusers at lists.iptel.org
> Sent: Sunday, June 12, 2005 1:34 PM
> Subject: Fw: [Serusers] Multiple Domain Problem ser0.9.2
>
>
> I'd like to add that I have added:
> 1. domains using serctl domain add
> 2. added users for domain a and users for domain b
> 3. each user is authenticated without relation with the domain
> 4. each user that is present in domain a and domain b get authentication
> failed (registering in domain a and registrering in doamin b);
>
> thanks again.
>
> Rosario
>
> ----- Original Message ----- 
> From: Rosario Pingaro
> To: serusers at lists.iptel.org
> Sent: Sunday, June 12, 2005 5:04 PM
> Subject: [Serusers] Multiple Domain Problem ser0.9.2
>
>
> I'd like to configure SER to host two different domains; the domains are
> into the hst file of the linux machine.
>
> The problem is that SER autheticates the users indifferently from the 
> domain
> (I have enabled use_domain on both registrar and userloc), also if an user
> is present on both domains i got an authentication failed.
> I don't have alias because the doamin ar einto the linux' host file.
>
> If I remove a domain from the file and don't make an alias I get an error
> about "too many hops" because ser doesn't recognize as myself.
>
> Please may you halp me to debug?
>
> Thanks
>
> Rosario
>
>
>
> These are some part of my ser.cfg
>
>
>
> #debug=6
> fork=yes
> log_stderror=no
>
>
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> fifo_mode=0666
> fifo_db_url="mysql://ser:hesloimgs@ns2.italycomnet.it/ser"
> listen=213.178.216.45
>
> modparam("domain", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("domain", "db_mode", 1)
> modparam("domain", "domain_table", "domain")
> modparam("domain", "domain_col", "domain")
> modparam("permissions", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("permissions", "db_mode", 1)
> modparam("permissions", "trusted_table", "trusted")
> modparam("uri_db", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("usrloc", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("usrloc", "db_mode", 1)
> modparam("usrloc", "use_domain",1)
> modparam("auth_db", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
> modparam("registrar", "nat_flag", 6)
> modparam("registrar", "use_domain",1)
> modparam("nathelper", "natping_interval", 0)
> modparam("nathelper", "rtpproxy_disable", 1)
> modparam("mediaproxy","natping_interval",30)
> modparam("acc", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> modparam("acc", "db_flag", 1)
> modparam("acc", "db_missed_flag", 1)
> modparam("acc", "failed_transactions", 1)
> modparam("acc", "report_cancels", 1)
> modparam("acc", "log_fmt", "cdfimorstup")
> modparam("acc", "log_level", 1)
> modparam("acc", "report_ack", 1)
> modparam("rr", "enable_full_lr", 1)
> modparam("tm", "fr_timer", 40)
> modparam("tm", "fr_inv_timer", 60)
> modparam("tm", "fr_inv_timer_avp", "inv_timeout")
> modparam("tm", "wt_timer", 5)
> modparam("group", "db_url", "mysql://ser:heslo@xxx.xxxxxx.it/ser")
> #
>
> route[2] {
>        sl_send_reply("100", "ci provo...");
>        if (!search("^Contact:\ +\*") && client_nat_test("7"))  {
>                setflag(6);
>                fix_nated_register();
>                force_rport();
>        };
>
>        if (!www_authorize("", "subscriber")) {
>                www_challenge("", "0");
>                break;
>        };
>
>
> route[3] {
>        if (client_nat_test("3")){
>                setflag(7);
>                force_rport();
>                fix_nated_contact();
>        };
>        if (method=="INVITE" && !allow_trusted()) {
>                if (!proxy_authorize("", "subscriber")) {
>                        proxy_challenge("", "0");
>                        break;
>                } else if (!check_from()) {
>                        sl_send_reply("403","Setta From=ID");
>                        break;
>                };
>                consume_credentials();
>        };
>        lookup("aliases");
>        if (uri!=myself) {
>                route(5);
>                route(1);
>                break;
>        };
>
>        if (!lookup("location") && !isflagset(4)) {
>
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>