[Serusers] ATA phone not working

[Min ZOU]

Hi,

I believe ATA's firmware should be OK, because I have tested 
successfully with external SIP server from sipphone.com (which uses SER 
I think)

Steve Blair wrote:
> 
>  When I used an ATA186, a long time ago, certain software releases did not
> resolve SRV records. Cisco said changing one of the flag fields (I 
> cannot remember
> which) would correct this but it never did. Anyway since my proxy was 
> configured
> to forward calls based on the domain name and not it's own IP address or 
> hostname
> ATAs with this problem failed to work. If I remember correctly v2.16.x code
> worked fine with SRV records.
> 
>  I cannot say if this is the problem you are experiencing or not but 
> this is all the
> advice I have to offer about ATAs.
> 
> -Steve
> 
> Min ZOU wrote:
> 
>> Hi,
>>
>> I am trying to get an ATA phone working for SER server.
>> Now the ATA phone can receive calls from softphone(kphone) on a PC, 
>> while it cannot call out. (softphone, ATA phone and SER server are in 
>> the same subnet)
>>
>> $ serctl ul show 100
>> <sip:100 at 192.168.1.100:5600>;q=0.00;expires=802
>>
>> Any idea on how to resolve the problem? Thanks!
>>
> 


-- 
Best regards,
Min