[Serusers] rtp proxy
Sebastian Kühner
skuehner at veraza.com
Wed Jul 20 16:41:22 CEST 2005
Hello,
One hint more - Thanks! Now I've put modparam("nathelper", "rtpproxy_sock",
"/var/run/rtpproxy.sock")
... but the same error. The file /var/run/rtpproxy.sock exists
----- Original Message -----
From: "maka" <icokan at gmail.com>
To: "Sebastian Kühner" <skuehner at veraza.com>
Sent: Wednesday, July 20, 2005 11:31 AM
Subject: Re: [Serusers] rtp proxy
hya,
have you tried adding
modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock")
to your ser.cfg?
On 7/20/05, Sebastian Kühner <skuehner at veraza.com> wrote:
> Hi!
>
> Yes, I started rtpproxy with "rtpproxy" in the command line. (it's in
> /usr/local/bin)
>
> Sorry, I should have sent you the ser config:
>
> # ------------- nat helper parameters
> #We will you flag 6 to mark NATed contacts
> modparam("registrar", "nat_flag", 6)
>
> # Enable NAT pinging
> modparam("nathelper", "natping_interval", 60)
>
> # Ping only contacts that are known to be
> # behind NAT
> modparam("nathelper", "ping_nated_only", 1)
>
> ... and at the beginning of the routing:
>
>
> # special handling for NATed clients; first, nat test is
> # executed: it looks for via!=received and RFC1918 addresses
> # in Contact (may fail if line-folding used); also,
> # the received test should, if complete, should check all
> # vias for presence of received
> if (nat_uac_test("3")) {
> # allow RR-ed requests, as these may indicate that
> # a NAT-enabled proxy takes care of it; unless it is
> # a REGISTER
> if (method == "REGISTER" || ! search("^Record-Route:")) {
> log("LOG: Someone trying to register from private IP,
rewriting\n");
> # This will work only for user agents that support symmetric
> # communication. We tested quite many of them and majority is
> # smart smart enough to be symmetric. In some phones, like
> # it takes a configuration option. With Cisco 7960, it is
> # called NAT_Enable=Yes, with kphone it is called
> # "symmetric media" and "symmetric signaling". (The latter
> # not part of public released yet.)
> fix_nated_contact(); # Rewrite contact with source IP of
signalling
> if (method == "INVITE") {
> fix_nated_sdp("1"); # Add direction=active to SDP
> };
> force_rport(); # Add rport parameter to topmost Via
> setflag(6); # Mark as NATed
> };
> };
>
> ... and at the "end":
>
>
> if (isflagset(6)) {
> force_rtp_proxy();
> t_on_reply("1");
> append_hf("P-Behind-NAT: Yes\r\n");
> };
>
> if (!t_relay()) {
> sl_reply_error();
> break;
> };
>
> onreply_route[1] {
> if (status =~ "(183)|2[0-9][0-9]") {
> fix_nated_contact();
> force_rtp_proxy();
> };
> }
>
> Thanks for your help!
>
> Sebastian
>
>
>
>
> ----- Original Message -----
> From: "harry gaillac" <gaillacharry at yahoo.fr>
> To: "Sebastian Kühner" <skuehner at veraza.com>
> Sent: Wednesday, July 20, 2005 11:06 AM
> Subject: Re: [Serusers] rtp proxy
>
>
> > which params do you set in ser.cfg for nathelper
> > do you start rtpproxy?
> >
> > harry
> > --- Sebastian Kühner <skuehner at veraza.com> a écrit :
> >
> > > Hi!
> > >
> > > Sorry, but I didn't find anything about "compiling"
> > > and "nathelper". Where
> > > can I find that? I looked at the iptel webpage and
> > > in the README of the
> > > module.
> > >
> > > Has anyone experiences with nathelper, ser-0.9.0 and
> > > rtpproxy? I get the
> > > same error messages...
> > >
> > > ERROR: send_rtpp_command: can't connect to RTP proxy
> > > WARNING: rtpp_test: can't get version of the RTP
> > > proxy
> > >
> > > I compiled it like this:
> > > ./configure
> > > make
> > > make install
> > >
> > > Thanks!
> > >
> > > Sebastian
> > >
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "harry gaillac" <gaillacharry at yahoo.fr>
> > > To: "Sebastian Kühner" <skuehner at veraza.com>
> > > Sent: Wednesday, July 20, 2005 10:45 AM
> > > Subject: Re: [Serusers] rtp proxy
> > >
> > >
> > > > look at
> > > http://developer.berlios.de/cvs/?group_id=480
> > > >
> > > > cvs
> > > >
> > > -d:pserver:anonymous at cvs.ser.berlios.de:/cvsroot/ser
> > > > login
> > > > cvs -z3
> > > >
> > > -d:pserver:anonymous at cvs.ser.berlios.de:/cvsroot/ser
> > > > co rtpproxy
> > > >
> > > > Read nathelper module and rtpproxy code before
> > > > compiling !
> > > >
> > > > You won't find good docs -:(
> > > >
> > > > Harry
> > > >
> > > > --- Sebastian Kühner <skuehner at veraza.com> a écrit
> > > :
> > > >
> > > > > Thanks for your answer!
> > > > >
> > > > > How can I download them? Do I have to click to
> > > all
> > > > > that files now to
> > > > > download?
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "harry gaillac" <gaillacharry at yahoo.fr>
> > > > > To: "Sebastian Kühner" <skuehner at veraza.com>
> > > > > Sent: Wednesday, July 20, 2005 10:21 AM
> > > > > Subject: RE: [Serusers] rtp proxy
> > > > >
> > > > >
> > > > > > hello,
> > > > > >
> > > > > > Look here for the latest rtpproxy :
> > > > > >
> > > > >
> > > >
> > >
> > http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/
> > > > > >
> > > > > > Check config for nathelper module
> > > > > >
> > > > > > harry
> > > > > > --- Sebastian Kühner <skuehner at veraza.com> a
> > > écrit
> > > > > :
> > > > > >
> > > > > > > Hi all,
> > > > > > >
> > > > > > > I want to implement a rtpproxy, but after
> > > > > > > installation and implementation in
> > > > > > > ser I get the follwing error messages:
> > > > > > >
> > > > > > > ERROR: send_rtpp_command: can't connect to
> > > RTP
> > > > > proxy
> > > > > > > 18(5422) WARNING: rtpp_test: can't get
> > > version
> > > > > of
> > > > > > > the RTP proxy
> > > > > > > 18(5422) WARNING: rtpp_test: support for RTP
> > > > > > > proxyhas been disabled
> > > > > > > temporarily
> > > > > > > 19(5423) ERROR: send_rtpp_command: can't
> > > connect
> > > > > to
> > > > > > > RTP proxy
> > > > > > > 19(5423) WARNING: rtpp_test: can't get
> > > version
> > > > > of
> > > > > > > the RTP proxy
> > > > > > > 19(5423) WARNING: rtpp_test: support for RTP
> > > > > > > proxyhas been disabled
> > > > > > > temporarily
> > > > > > > 0(5378) ERROR: send_rtpp_command: can't
> > > connect
> > > > > to
> > > > > > > RTP proxy
> > > > > > > 0(5378) WARNING: rtpp_test: can't get
> > > version
> > > > > of
> > > > > > > the RTP proxy
> > > > > > > 0(5378) WARNING: rtpp_test: support for RTP
> > > > > > > proxyhas been disabled
> > > > > > > temporarily
> > > > > > >
> > > > > > > Where can I get the newest rtpproxy (for ser
> > > > > 0.9.0)?
> > > > > > > I wanted to enter at
> > > > > > > the ftp-site of iptel, but I think it's
> > > down.
> > > > > > >
> > > > > > > Thanks!
> > > > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > >
> > > > > > >
> > > _______________________________________________
> > > > > > > Serusers mailing list
> > > > > > > serusers at lists.iptel.org
> > > > > > >
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
___________________________________________________________________________
> > > > > > Appel audio GRATUIT partout dans le monde avec
> > > le
> > > > > nouveau Yahoo! Messenger
> > > > > > Téléchargez cette version sur
> > > > > http://fr.messenger.yahoo.com
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Serusers mailing list
> > > > > serusers at lists.iptel.org
> > > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
___________________________________________________________________________
> > > > Appel audio GRATUIT partout dans le monde avec le
> > > nouveau Yahoo! Messenger
> > > > Téléchargez cette version sur
> > > http://fr.messenger.yahoo.com
> > > >
> > > >
> > >
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> >
> >
> >
> >
> >
> >
> >
> >
>
___________________________________________________________________________
> > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo!
Messenger
> > Téléchargez cette version sur http://fr.messenger.yahoo.com
> >
> >
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
--
I'm sick and tired of being sick and tired...
More information about the sr-users
mailing list