[Serusers] sems + ser = trouble !! @@"
Carl
s9134131 at gmail.com
Wed Jul 20 06:42:00 CEST 2005
Hello Stefan,
I am sure that the announce path and default announce name are both
correct. but it still have no voice ><.
how can i see where is a call forwarding ? it always show "connected"
in x-lite, but i can't listen any sound.
Thanks, Carl
2005/7/19, Stefan Sayer <sayer at fokus.fraunhofer.de>:
> Hello,
>
> Carl wrote:
> > ---------- Forwarded message ----------
> > From: Carl <s9134131 at gmail.com>
> > Date: 2005/7/19 上午 11:51
> > Subject: sems + ser = trouble !! @@"
> > To: serusers at iptel.org
> >
> >
> > hi everybody:
> >
> > i have a ser + sems system. but there are some questions troubled me.
> > i don't know what my system happened!
> >
> > now i have some question:
> >
> > 1.my voicemail can record voice message, but i can't listen the voice
> > before i left message(tell that you can begin talking).
> have a look at these two configuration options in sems.conf
> config.voicemail section and verify whether the file exists
> ( e.g. /usr/local/lib/sems/audio/default_en.wav ):
>
> # optional parameter: announce_path=<path>
> #
> # - sets the path where announce files are searched for
> # - the file to be played is searched in the following order:
> # <announce_path>/<domainname>/<username>.wav
> # <announce_path>/<domainname>/<language>/<default_announce>
> # <announce_path>/<domainname>/<default_announce>
> # <announce_path>/<language>/<default_announce>
> # <announce_path>/<default_announce>
> # where <language> is taken from the body of P-Language header
> # of the request (if any).
> announce_path=/usr/local/lib/sems/audio/
>
> # parameter: default_announce=<filename>
> #
> # - sets the name of the default announce WAV file
> default_announce=default_en.wav
> >
> > 2.my ser is always forward all calls into voicemail, even if receiver
> > is online. i dont know how to confige ser.cfg, can anyone help me ?
> do something like this with your INVITE:
>
> if (!lookup("location")) {
> if(!t_newtran()){
> log("could not create transaction\n");
> sl_send_reply("500","could not create transaction");
> }
>
> if(!vm("/tmp/am_fifo","voicemail")){
> log("could not contact voicemail erver\n");
> t_reply("500","could not contact voicemail server");
> }
> }
> }
>
> >
> > 3.there are some messages like this , what's going on ?
> > (5208) WARNING: reloadModuleConfig (SemsConfiguration.cpp:66): no
> > configuration found for module isdngw, maybe you want to specify
> > config.isdngw in config file.
> > (5208) WARNING: sig_usr (sems.cpp:75): signal 2 received
> > (5207) WARNING: sig_usr (sems.cpp:75): signal 2 received
> > (5207) WARNING: sig_usr (sems.cpp:75): signal 17 received
> did you kill or ctrl-break sems?
>
>
> Stefan
> >
> >
> > thanks, Carl
> >
> >
> > the following are my ser.cfg and sems.conf
> > #--------------------------------------------------------------------------------------------------
> > #
> > # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=3 # debug level (cmd line: -dddddddddd)
> > fork=yes
> > log_stderror=no # (cmd line: -E)
> >
> >
> > #Uncomment these lines to enter debugging mode
> > /*
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/vm.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> >
> > #modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > modparam("usrloc", "db_mode", 2)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this config),
> > # uncomment also the following parameter)
> > #
> > modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> >
> > # -- vm params --
> > modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser")
> > modparam("voicemail", "subscriber_table", "subscriber")
> > modparam("voicemail", "email_column", "email_address")
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> > log(1, "entering main loop\n");
> > if (method=="REGISTER")
> > log(1, "REGISTER message received\n");
> >
> > if (method=="INVITE")
> > log(1, "INVITE message received\n");
> >
> > if (method=="ACK")
> > log(1, "ACK message received\n");
> >
> > if (method=="BYE")
> > log(1, "BYE message received\n");
> >
> > if (method=="CANCEL")
> > log(1, "CANCEL message received\n");
> >
> > if (method=="SUBSCRIBE")
> > log(1, "SUBSCRIBE message received\n");
> >
> > if (method=="NOTIFY")
> > log(1, "NOTIFY message received\n");
> >
> > if (method=="OPTIONS")
> > log(1, "OPTIONS message received\n");
> >
> > if (method=="INFO")
> > log(1, "INFO message received\n");
> >
> > if (method=="MESSAGE")
> > log(1, "MESSAGE message received\n");
> >
> > if (method=="REFER")
> > log(1, "REFER message received\n");
> >
> > # lookup("aliases");
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> >
> > # check changed from 0.8.11 to 0.8.12
> > # if (len_gt( max_len )) {
> > if (msg:len > max_len) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # if (!uri==myself) {
> > # sl_send_reply("404", "not reponsible for host in request-uri");
> > # break;
> > # };
> >
> >
> > # Voicemail specific configuration - begin
> >
> > if(method=="ACK" || method=="INVITE" || method=="BYE" ||
> > method=="REFER" || method=="CANCEL"){
> > log(1, "Entering voicemail processing\n");
> >
> > log(1, "check if new transaction ... \n");
> > if(t_newtran()){
> > log(1, "... yes, new transaction\n");
> > t_reply("100","voicemail ser - Trying -- just
> > wait a minute !");
> > t_reply("100","voicemail ser - Trying 2 --
> > just wait a minute !");
> > if(method=="INVITE" || method=="REFER"){
> > log("**************** vm start
> > - begin ******************\n");
> > if( uri =~ "conference" ){
> > log(1, "incoming
> > conference call\n");
> >
> > if(!vm("/tmp/am_fifo","conference")){
> > log("could not
> > contact conference server\n");
> >
> > t_reply("500","could not contact conference server");
> > };
> > }
> > else if( uri =~ "echo" ){
> > log(1, "incoming echo call\n");
> > if(!vm("/tmp/am_fifo","echo")){
> > log("could not
> > contact echo\n");
> >
> > t_reply("500","could not contact echo");
> > };
> > }
> > else {
> > log(1, "incoming
> > voicemail call\n");
> >
> > if(!vm("/tmp/am_fifo","voicemail")){
> > log("could not
> > contact voicemail\n");
> >
> > t_reply("500","could not contact voicemail");
> > };
> > };
> > log("**************** vm start
> > - end ******************\n");
> > break;
> > };
> >
> > if(method=="BYE" || method=="CANCEL"){
> > log("**************** vm
> > end/refer - begin ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact
> > the media server\n");
> > t_reply("500","could
> > not contact the media server");
> > };
> > log("**************** vm
> > end/refer - end ********************\n");
> > break;
> > };
> > }
> > else {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > };
> > };
> >
> > # Voicemail specific configuration - end
> >
> > sl_send_reply("501", "method not understood here");
> > log(1, "method not understood here\n");
> >
> > }
> >
> >
> > ===========================================================
> > i dont have modified sems.conf
> > ===========================================================
> >
> > please help me !! thanks, Carl
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Serusers mailing list
> > Serusers at iptel.org
> > http://mail.iptel.org/mailman/listinfo/serusers
>
>
> --
> Fraunhofer Institut FOKUS Email:stefan.sayer at fokus.fraunhofer.de
> Kaiserin-Augusta-Allee 31 Phone: +49 30 3463 7242
> D-10589 Berlin, Germany
> http://www.fokus.fraunhofer.de/research/cc/mobis
>
>
More information about the sr-users
mailing list