[Serusers] Simulate BYE Message

[Sebastian Kühner]

Hi all,

That doesn't work for me. The best would be a dump of the SIP messages
(within the BYE message).

Any idea?

Thanks

Sebastian

----- Original Message ----- 
From: "Paul Hazlett" <javarockx at gmail.com>
To: "Sebastian Kühner" <skuehner at veraza.com>
Cc: <serusers at lists.iptel.org>
Sent: Thursday, July 07, 2005 4:51 PM
Subject: Re: [Serusers] Simulate BYE Message


Try this link

http://www.onsip.org/modules/xoopsfaq/index.php?cat_id=3#q2

Regards,
Paul

On 7/7/05, Sebastian Kühner <skuehner at veraza.com> wrote:
> Hello,
>
> I'm trying to send out a SIP BYE Message with sipsak to make my phones
> hanging up (to force them to hang up)...
>
> I used a file that is called bye.ser and looks like this:
>
> BYE sip:55 at 192.168.1.101:5060 SIP/2.0
> Route: <sip:192.168.1.222:5061;lr>
> From: sip:14 at 192.168.1.101:5062;user=phone
> To: sip:55 at 192.168.1.101:5060;user=phone
> Contact: sip:14 at 192.168.1.101:5062;user=phone
> CSeq: 42759 BYE
> Call-ID: 746707906-47a484e6 at 192.168.1.101
> User-Agent: sipsak 0.8.13
> Max-Forwards: 16
> Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE
> Content-Length: 0
>
> ...using the command:
>
> sipsak -f bye.ser -s sip:192.168.1.222:5061 -vvv
>
> ... but the message doesn't go out. My ser is running on
192.168.1.222:5061
>
> Well, my question is: How can I capture the SIP messages that are going
> through my ser?? Is there any debug option to do that? It would be easier
> for me to simulate it after...
>
> Many thanks!!
>
> Sebastian
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>