[Serusers] call routing problem

[Atle Samuelsen]

Maybe Im wrong, but wont you be able to do the check after you have done
you alias lookup?

something like :

Invite: 0845
lookup("aliases");
invite: 040600
if(is_user_in("To","ast");..
..setflagmagic..
}..


Maybe Im compleatly wrong. and dont see you rpoint..but it was just a
tought (just barly read the tread)

-atle


* Iqbal <iqbal at gigo.co.uk> [050706 15:59]:
> well kind of :-)
> 
> the 040600 (alias) is getting picked up, because the 0845 is routing 
> there, and the call goes through, hence the lookup on my db already does 
> what the stripping would do.
> 
> The problem I have is that I need to set a flag based upon the calledID, 
> to oute to asterisk, and this is not possible since I am checking my my 
> grp table to see if the user belongs to a grp, now in there the 040600 
> maps to a group called asterisk.
> 
> So if 040600 dials out, it uses is_user_in("From", ast) and set a flag, 
> however if I do it in reverse, i.e call coming into the user, then I 
> cant really check for anything,  since 0845 will not be in the grp table.
> 
> iqbal
> 
> Steve Blair wrote:
> 
> >
> >Maybe. I'm getting lost in what you are trying to accomplish. I 
> >thought you wanted
> >an inbound call through the gateway to the asterisk box to be 
> >presented with a
> >called party number of 040600 extracted from 08450040600. If this 
> >isn't the case
> >then please ignore my suggestion :-)
> >
> >-Steve
> >
> >Iqbal wrote:
> >
> >>but wouldnt that then be avoiding the mapping of 0845xxx to 040600 
> >>instead, i.e bypassing it,
> >>
> >>Steve Blair wrote:
> >>
> >>>
> >>>Can your gateway strip digits? If so use translation rules to strip the
> >>>prefix from the called party number.
> >>>
> >>>Iqbal wrote:
> >>>
> >>>>Hi
> >>>>
> >>>>I am mapping external numbers to internal ones in a db, eg 
> >>>>08450040600 maps to 040600
> >>>>
> >>>>So when a call comes from pstn to 08450040600 it hits the ip phone 
> >>>>on 040600, all well and good.
> >>>>
> >>>>Now what I am testing is deploying asterisk for other features like 
> >>>>call pickup and all. I have managed to create separate contexts in 
> >>>>asterisk based on company ID (i.e virtual PBX) assigned from a DB.
> >>>>
> >>>>And when a call from IP phone A (company id =cid=500) calls out the 
> >>>>call goes via ser (thats where all IP phones are registered) to 
> >>>>asterisk, and then out to ser --->pstn (was gonna go out via 
> >>>>asterisk - pstn, but decided to keep it all within ser). This is 
> >>>>fine, because asterisk is in the loop.
> >>>>
> >>>>Now what I need is for inbound calls to that IP phone to also be 
> >>>>routed into asterisk, and then to ser and to the ipphone, that way 
> >>>>I pull all calls for each company into a asterisk context for all 
> >>>>its pbx functionality.
> >>>>
> >>>>The problem is that when 0845 is called from pstn, I cant setflag 
> >>>>on it, using is_user_in, since From = pstn dialing number, and To = 
> >>>>4408450040600, and not 040600, any ideas on what I can match on so 
> >>>>that I can set the correct flag and divert to asterisk.
> >>>>
> >>>>Iqbal
> >>>>
> >>>>_______________________________________________
> >>>>Serusers mailing list
> >>>>serusers at lists.iptel.org
> >>>>http://lists.iptel.org/mailman/listinfo/serusers
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>