[Serusers] Grandstream BT100 Shows Caller ID Even With RPID privacy=full

[Java Rockx]

Hi All.

Does anyone know why my grandstream BT100 firmware 1.0.5.16 shows the caller ID rather than
"anonymous" even though I have Remote-Part-ID enabled with privacy=full?

Below is the INVITE message sent to the BT100 from a UTstarcom ATA.

Regards,
Paul

U 2005/01/24 16:43:55.073424 68.84.xxx.xxx:5060 -> 68.84.xxx.xxx:13721
INVITE sip:3215551212 at 68.84.xxx.xxx:13721;user=phone SIP/2.0.
Record-Route: <sip:68.84.xxx.xxx;ftag=2590080990;lr=on>.
Via: SIP/2.0/UDP 68.84.xxx.xxx;branch=z9hG4bK5082.72060543.0.
Via: SIP/2.0/UDP 192.168.0.86:5060;rport=1041;received=68.84.xxx.xxx;branch=z9hG4bK1403464825.
From: UTStarcom <sip:4075551212 at mycompany.com>;tag=2590080990.
To: <sip:3215551212 at mycompany.com>.
Call-ID: 1980470039 at 192.168.0.86.
CSeq: 1301 INVITE.
Contact: <sip:4075551212 at 68.84.xxx.xxx:1041>.
max-forwards: 16.
subject: sipcall.
Allow: INVITE, ACK, CANCEL, BYE, REFER, NOTIFY.
Content-Type: application/sdp.
Content-Length: 178.
Remote-Party-ID: "Anonymous"
<sip:unknown at 68.84.xxx.xxx;user=phone>;party=calling;screen=yes;id-type=subscriber;privacy=full.
.
v=0.
o=- 1363 3077 IN IP4 192.168.0.86.
s=-.
c=IN IP4 68.84.xxx.xxx.
t=0 0.
m=audio 36526 RTP/AVP 18 0 8 2 4 101.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=ptime:20.



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Helps protect you from nasty viruses. 
http://promotions.yahoo.com/new_mail