[Serusers] ser on linksys router
Girish
gr_sh2003 at yahoo.com
Wed Jan 19 14:08:08 CET 2005
Hello,
--- Alexander Hoffmann <alexander.hoffmann at netgenius.de> wrote:
<SNIP>
> This setup works very well but there is one big issue: If you pick up the
> analog phone, the call goes through * to SER. Now if you want to place a PSTN
> call, SER forwards to * in order to reach PSTN. Asterisk then reports a loop
> which is not correct ! The reason why this does not have to be a loop is that
> the fact that an INV for the same call hits * twice does not necessarily mean
> to have a loop. In our case also the direction is important: * is configured
> to route all INV from the ISDN cards to SER but INVs coming from SER are
> terminated at the ISDN cards. Thus it is absolutely ok if there is an INV
> from ISDN card1 -> going to SER -> returning to * -> terminated at ISDN
> card2.
Instead of forwarding calls back to Asterisk from SER, reply Asterisk with a '302 Moved
Temporarily' with a modified contact header. I think it should solve your problem.
Regards,
=====
Girish Gopinath <gr_sh2003 at yahoo.com>
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
More information about the sr-users
mailing list