Fw: [Serusers] Problem in calling and Accounting

[Ritesh Jalan]

Pls. pls. If any body have the solution pls. do provide me..


Thanks & Regards
Ritesh Jalan
Senior Engineer - Test & Audit
Net4india Ltd.
504, Bhikaji Cama Bhawan
11, Bhikaji Cama Place
New Delhi 110066
Tel: 91 (011) (26160129 - 131)  (Extn 131)
URL: http://www.net4india.com
----- Original Message ----- 
From: Ritesh Jalan 
To: serusers at lists.iptel.org 
Sent: Wednesday, January 12, 2005 4:52 PM
Subject: [Serusers] Problem in calling and Accounting


Hi All
I have installed Ser 0.8.14 with mysql.so. My aim is to authenticate users and then forward all the request to destination cisco router, and also to maintain accounting for billing purpose. 
I am facing two problems, my all call gets disconnected after few secs of its own and I dont get call records also for any calls

My ser.cfg is as below. Pls help me in this matter.




#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

listen=202.71.135.193
listen=127.0.0.1
alias=jalan.com
alias=202.71.135.193


check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# ------Acc Params ------
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser")
# -------------------------  request routing logic -------------------

# main routing logic

route{

 # initial sanity checks -- messages with
 # max_forwards==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
 if ( msg:len > max_len ) {
  sl_send_reply("513", "Message too big");
  break;
 };

 # we record-route all messages -- to make sure that
 # subsequent messages will go through our proxy; that's
 # particularly good if upstream and downstream entities
 # use different transport protocol
 record_route(); 
 # loose-route processing
 if (loose_route()) {
  t_relay();
  break;
 };

 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri==myself) {

  if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
   if (!www_authorize("202.71.135.193", "subscriber")) {
    www_challenge("202.71.135.193", "0");
    break;
   };

   save("location");
   break;
  };
  if (method == "INVITE"){
  if (uri=~"sip:[0-9]*@*"){
  prefix("1234");
  rewritehostport("64.45.47.231:5060");
  forward(64.45.47.231, 5060);
  };
  if (!t_relay()) {
  sl_reply_error();
  break;
  };
  };
  setflag(1);
  # native SIP destinations are handled using our USRLOC DB
  #if (!lookup("location")) {
   #sl_send_reply("404", "Not Found");
   #break;
  #};
 };
 # forward to current uri now; use stateful forwarding; that
 # works reliably 
}




Thanks & Regards
Ritesh Jalan
Senior Engineer - Test & Audit
Net4india Ltd.
504, Bhikaji Cama Bhawan
11, Bhikaji Cama Place
New Delhi 110066
Tel: 91 (011) (26160129 - 131)  (Extn 131)
URL: http://www.net4india.com


--------------------------------------------------------------------------------


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050114/760705bc/attachment.htm>