[Serusers] no reply from radius server
Seong bear
akhng999 at gmail.com
Mon Feb 28 16:51:38 CET 2005
Hi,
I'm trying to startup my ser with radius authentication, however i
encountered the same problem with this post:
http://lists.iptel.org/pipermail/serusers/2005-January/014425.html. I
really appreciate that someone could point me put the problelm. :-(
authserver radiusserver, 3.4.5.6
acctserver radiusserver, 3.4.5.6
where radiusserver with ip 3.4.5.6 in /etc/hosts, and tcdump didn't show
any traffic with destinated radius server ip or hostname
rc_send_server: no reply from RADIUS server radiusserver:1812 --> and
sometime, i can't get to see this message. and the server just startup
with log below without any message followed by.
Feb 28 22:55:44 bear ser: Listening on
Feb 28 22:55:44 bear ser: 127.0.0.1 [127.0.0.1]:5080
Feb 28 22:55:44 bear ser: 192.168.0.68 [192.168.0.68]:5080
Feb 28 22:55:44 bear ser: Aliases: localhost:5080
localhost.localdomain:5080 bear:5080 bear.abc.com:5080
Feb 28 22:55:44 bear ser: ser startup succeeded
Feb 28 22:55:44 bear ser[15935]: INFO: udp_init: SO_RCVBUF is initially
110592
Feb 28 22:55:44 bear ser[15935]: INFO: udp_init: SO_RCVBUF is finally 221184
Feb 28 22:55:45 bear ser[15935]: INFO: udp_init: SO_RCVBUF is initially
110592
Feb 28 22:55:45 bear ser[15935]: INFO: udp_init: SO_RCVBUF is finally 221184
Feb 28 22:55:45 bear ser[15946]: INFO: fifo process starting: 15946
Feb 28 22:55:45 bear ser[15946]: SER: open_uac_fifo: fifo server up at
/tmp/ser_fifo...
This is my ser.cfg
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5080
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/group_radius.so"
#loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
#loadmodule "/usr/local/lib/ser/modules/im.so"
#loadmodule "/usr/local/lib/ser/modules/jabber.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("auth_radius", "service_type", 15)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
#modparam("acc", "log_level", 1)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
log(1, "Checking uri myself\n");
if (method=="REGISTER") {
log(1, "after method REGISTER\n");
# Uncomment this if you want to use digest authentication
if (!radius_www_authorize("")) {
log(1, "REGISTER: challenging user\n");
www_challenge("", "0");
break;
};
save("location");
break;
};
if (method=="INVITE") {
log(1, "INVITE\n");
setflag(1); /* set for accounting (the same
value as in log_flag!) */
};
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same
value as in log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
More information about the sr-users
mailing list