[Serusers] ser-0.8.14 / ser-0.9 + rtpproxy + PSTN
support
support at cybertel.biz
Fri Feb 25 08:49:23 CET 2005
----- Original Message -----
From: support
To: Jefrey ; serusers at lists.iptel.org
Sent: Friday, February 25, 2005 3:46 PM
Subject: Re: [Serusers] ser-0.8.14 / ser-0.9 + rtpproxy + PSTN
Hi,
Yes, this configuration allow SIP clients to call each other.
This is the updated config.
Thomas
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
listen=""
port=5060
children=4
fifo_mode=0666
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -- Nathelper params --
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping interval
modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT
# ------------------------- request routing logic -------------------
# main routing logic
route{
# -----------------------------------------------
# Sanity Check Section
# -----------------------------------------------
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# -----------------------------------------------
# NOTIFY Keep-Alive Section
# -----------------------------------------------
if ((method=="NOTIFY") && search("^Event: keep-alive")) {
sl_send_reply("200","OK");
break;
};
# Nathelper
if (nat_uac_test("3")) {
# Allow RR-ed requests, as these may indicate that
# a NAT-enabled proxy takes care of it; unless it is
# a REGISTER
if (method == "REGISTER" || ! search("^Record-Route:")) {
fix_nated_contact(); # Rewrite contact with source IP of signalling
if (method == "INVITE") {
fix_nated_sdp("1"); # Add direction=active to SDP
};
force_rport(); # Add rport parameter to topmost Via
setflag(6); # Mark as NATed
};
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("", "subscriber")) {
www_challenge("", "0");
break;
};
save("location");
break;
};
# if the dialed number lies in the range 35891500-35891799, don't forward it to T1 Trunk GW
if ((uri=~"^sip:(852|)358915[0-9][0-9]@") || (uri=~"^sip:(852|)358916[0-9][0-9]@") || (uri=~"^sip:(852|)358917[0-9][0-9]@")) {
if (uri=~"^sip:852*") {
strip(3);
};
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
# Call Routing Section
if (!lookup("location")) {
if (uri=~"^sip:(852|)[0-9]{8}@") {
# Send to PSTN Gateway
route(2);
break;
};
sl_send_reply("404", "User Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# Nathelper
if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){
sl_send_reply("479", "We don't forward to private IP addresses");
break;
};
# if client or server know to be behind a NAT, enable relay
if (isflagset(6)) {
force_rtp_proxy();
};
# NAT processing of replies; apply to all transactions (for example,
# re-INVITEs from public to private UA are hard to identify as
# NATed at the moment of request processing); look at replies
t_on_reply("1");
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
break;
};
}
# PSTN Call to T1 Trunk GW
route[2] {
rewritehostport("");
if (isflagset(6)) {
force_rtp_proxy();
};
t_on_reply("1");
if (!t_relay()) {
sl_reply_error();
break;
};
}
# !! Nathelper
onreply_route[1] {
# NATed transaction ?
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
fix_nated_contact();
# Not all 2xx messages have a content body so here we make sure
# out Content-Length > 0 to avoid a parse error
if (!search("^Content-Length:\0")) {
force_rtp_proxy();
};
# otherwise, is it a transaction behind a NAT and we did not
# know at time of request processing ? (RFC1918 contacts)
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
---------end of config -----------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050225/516d49c2/attachment.htm>
More information about the sr-users
mailing list