[Serusers] Do ser + asterisk_b2bua work ?
Charles Wang
lazy.charles at gmail.com
Wed Feb 23 11:24:12 CET 2005
Dear Mike:
There is only a little bit explain in your package "b2bua_asterisk_v0.1.1.tgz".
README:
------------------------------------------------------------------------------------
Asterisk B2BUA project.
Installation:
Compile and install asterisk from asterisk_b2bua.tgz
Install perl MD5 Package.
edit agi/config.pl
in extensions.conf call agi script from DeadAGI.
-----------------------------------------------------------------------------------
It seems not enough for a new user like me to understand what it is
and how to start.
I have established the Asterisk as your explain, but I don't know how
to setup asterisk to accept my call from ser. Of cause, I know how to
route my call from UA to SER then route to a Trunking gateway or
Asterisk.
But how to setting Asterisk? It is a BIG problem for me.
Thank you for your kind to answer my question, Mike.
Best Regard
Charles
On Wed, 23 Feb 2005 10:47:17 +0200, Mike Tkachuk <mike at yes.net.ua> wrote:
> Hello Charles,
>
> I'm developer of this project, see inline comments.
>
> CW> Dear ALL:
>
> CW> I find a program named "asterisk_b2bua" on
> CW> http://developer.berlios.de/projects/b2bua/
>
> CW> And I also download them(two components) and try to test it.
> 1st component it's AGI script that do b2bua functionality.
> 2nd it's patched version of asterisk. I had no time to make good
> patches, that's why it full patched version. (I will do patches for
> 1.0.5 soon)
> CW> But I have not enough knowledge about asterisk. It seems a Software PBX.
> CW> Does asterisk_b2bua work? Does anybody ever try it?
>
> It works in production. Few tenth of calls are relayed, for me it
> stable enough.
>
> CW> I have questions about my scenario.
>
> CW> |======================> UA2 (Internet)
> CW> |
> UA1 ===>> SER ===> Asterisk B2BUA ===> Trunking A (PSTN)
> CW> |
> CW> |
> CW> CDR + Prepaid + Handle Calls(Tear-down when call
> CW> during limited)
> CW> |
> CW> |
> CW> Authentication ( Radius / DB )
>
> CW> Q1. Will Asterisk's B2BUA pass through the "To" (such as
> CW> 0939749xxx at ser.xxx.net.tw PSTN number) to Trunking A?
> CW> In another word, is the B2BUA not necessary to rewrite the phone number?
>
> It can rewrite, or it can left it unchanged (2 rewriting functions
> exists - simple rewriting, like asterisk rewriting, and advanced using
> regular expressions)
>
> CW> Q2. How can B2BUA know when to tear-down this call if the call has some limits.
> CW> For example, UA1 has only 120 seconds to use this International call.
>
> You must return Session-Timeout attribute from your radius server for
> it.
>
> CW> Q3. Is it necessary for Radius Authentication? Is it possible if no
> CW> radius exists
> CW> and SER and Asterisk use the same MySQL database.
>
> It developed it to use with radius, but you can check AGI scrpit, it written
> in PERL, and I think very simple, you can add any functionality.
>
> CW> Q4. What do I need to download and setup when I use Asterisk
> CW> to start this prepaid compoment? The first one shall be
> CW> asterisk-1.0.5.tar.gz.
> CW> Maybe some Mysql supported scripts or installaion. And any more??
>
> You need to download 2 parts of application and install them. Some
> short instructions inside
>
> CW> Best Regard
> CW> Charles
>
> P.S. It's SER maillist, I think you should write to forum at
> b2bua.berlios.de (or I will create some maillist there.)
>
> P.P.S. It's first version of this tool, so don't punch me very much
> about bugs ;)
>
> --
> Best regards,
>
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,.
> Mike Tkachuk, ph:380-3433-47067
> YES ISP, fx:380-3433-47067
> Valova 17, mike|a|yes.net.ua
> Kolomyia, www.yes.net.ua
> Ukraine 78200 FWD: 66518
>
> 23.02.2005
> ICQ# 57698805
> MSN: mike_tkachuk|a|hotmail.com
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,.
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list