[Serusers] Can't run SER with radius
Roman
leroi at navigator.lv
Thu Feb 17 21:36:41 CET 2005
$ cat /usr/local/include/radiusclient.h |grep ,v
* $Id: radiusclient.h,v 1.9 1999/01/06 23:53:04 lf Exp $
$ ls -l /usr/local/lib
-rw-r--r-- 1 root root 47474 May 15 2004 libradiusclient.a
lrwxrwxrwx 1 root root 24 Feb 17 22:28 libradiusclient.so ->
libradiusclient.so.0.0.1
lrwxrwxrwx 1 root root 24 Feb 17 22:28 libradiusclient.so.0 ->
libradiusclient.so.0.0.1
-rwxr-xr-x 1 root root 45967 May 15 2004 libradiusclient.so.0.0.1
lrwxrwxrwx 1 root root 24 Feb 17 22:16 libradiusclient.so.2 ->
libradiusclient.so.0.0.1
drwxr-xr-x 3 roman roman 4096 Jul 27 2004 ser
$ cat /etc/ld.so.conf
include ld.so.conf.d/*.conf
/usr/lib/mysql
/usr/X11R6/lib
/usr/lib/qt-3.3/lib
/usr/local/lib
doesn't ser precompiled auth_radius module supposed to be working?
On Thursday 17 February 2005 21:47, Charles Wang wrote:
> It seems the problem of your environment. If you has compile the
> radiusclient first. Please make sure the its lib files and its include
> files are in your include path and lib path.
>
> You can search your /usr/local/include and make sure the file
> radiusclient.h in it. and /usr/local/lib/libradiusclient.* are exist.
>
> Then vi /etc/ld.so.conf and check if "/usr/local/lib" exist or not. If
> not, add it.
> Then use command "ldconf" to reload it. And make again.
>
> On Thu, 17 Feb 2005 17:56:47 +0200, Roman <leroi at navigator.lv> wrote:
> > well:
> >
> > gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall
> > -minline-all-stringops -malign-double -falign-loops -mcpu=athlon
> > -DNAME='"auth_radius.so"' -DVERSION='"0.8.14"' -DARCH='"i386"'
> > -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux
> > -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP
> > -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC
> > -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
> > -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD
> > -DHAVE_MSG_NOSIGNAL
> > -DHAVE_MSGHDR_MSG_CONTROL -I/usr/local/include -c authrad_mod.c -o
> > authrad_mod.o
> > authrad_mod.c: In function `mod_init':
> > authrad_mod.c:111: error: `DICT_VENDOR' undeclared (first use in this
> > function)
> > authrad_mod.c:111: error: (Each undeclared identifier is reported only
> > once authrad_mod.c:111: error: for each function it appears in.)
> > authrad_mod.c:111: error: `vend' undeclared (first use in this function)
> > authrad_mod.c:135: warning: assignment makes pointer from integer without
> > a cast
> > authrad_mod.c:140: error: too many arguments to function `rc_conf_str'
> > authrad_mod.c:140: error: too many arguments to function
> > `rc_read_dictionary' authrad_mod.c:145: warning: implicit declaration of
> > function
> > `rc_dict_findvend'
> > authrad_mod.c:163: error: too many arguments to function
> > `rc_dict_findattr' authrad_mod.c:163: error: too many arguments to
> > function `rc_dict_findval' make: *** [authrad_mod.o] Error 1
> >
> > and... 0.8.14 binary package has auth_radius in it
> > radiusd and radiusclient are installed and _working_
> >
> > On Thursday 17 February 2005 17:32, Charles Wang wrote:
> > > Just download the source code and type "make" under
> > > ser/modules/auth_radius/ Then copy the auth_radius.so to
> > > /usr/local/lib/ser/modules/
> > > Re-run your serctl.
> > > Make sure you have to install radiusclient package first before compile
> > > it.
> > >
> > > Charles
> > >
> > > On Thu, 17 Feb 2005 16:44:16 +0200, Roman <leroi at navigator.lv> wrote:
> > > > Sorry forgot syslog messages:
> > > >
> > > > Feb 17 16:37:41 uranus ser: ERROR: load_module: could not open module
> > > > </usr/local/lib/ser/modules/auth_radius.so>:
> > > > /usr/local/lib/ser/modules/auth_radius.so: undefined symbol:
> > > > rc_dict_findvend
> > > > Feb 17 16:37:41 uranus ser: parse error (36,13-55): failed to load
> > > > module Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module
> > > > matching auth_radius found |
> > > > Feb 17 16:37:41 uranus ser: parse error (44,78-79): Can't set module
> > > > parameter Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module
> > > > matching auth_radius found |
> > > > Feb 17 16:37:41 uranus ser: parse error (45,43-44): Can't set module
> > > > parameter Feb 17 16:37:41 uranus ser: parse error (93,32-33): unknown
> > > > command, missing loadmodule?
> > > >
> > > > On Wednesday 16 February 2005 20:45, Roman wrote:
> > > > > Anybody please help with subj
> > > > > 0.8.14 binaries from iptel.org
> > > > > ser -dddddddd says:
> > > > > ERROR: bad config file (4 errors)
> > > > >
> > > > > config as in the manual:
> > > > >
> > > > > # ----------- global configuration parameters
> > > > > ------------------------
> > > > >
> > > > > debug=5 # debug level (cmd line: -dddddddddd)
> > > > > #fork=yes
> > > > > #log_stderror=no # (cmd line: -E)
> > > > >
> > > > > /* Uncomment these lines to enter debugging mode
> > > > > debug=7
> > > > > fork=no
> > > > > log_stderror=yes
> > > > > */
> > > > >
> > > > > check_via=no # (cmd. line: -v)
> > > > > dns=no # (cmd. line: -r)
> > > > > rev_dns=no # (cmd. line: -R)
> > > > > port=5065
> > > > > #children=4
> > > > > fifo="/tmp/ser_fifo"
> > > > >
> > > > > # ------------------ module loading
> > > > > ----------------------------------
> > > > >
> > > > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > > >
> > > > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > > > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > > > >
> > > > > # ----------------- setting module-specific parameters
> > > > > ---------------
> > > > >
> > > > > # -- usrloc params --
> > > > > modparam("usrloc", "db_mode", 2)
> > > > >
> > > > > # -- auth params --
> > > > > modparam("auth_radius",
> > > > > "radius_config","/etc/radiusclient/radiusclient.conf")
> > > > > modparam("auth_radius", "service_type", 15)
> > > > >
> > > > > # -- rr params --
> > > > > # add value to ;lr param to make some broken UAs happy
> > > > > modparam("rr", "enable_full_lr", 1)
> > > > >
> > > > > #modparam("acc", "log_level", 1)
> > > > > #modparam("acc", "radius_flag", 1)
> > > > >
> > > > > # ------------------------- request routing logic
> > > > > ------------------- # main routing logic
> > > > >
> > > > >
> > > > > route{
> > > > >
> > > > > # initial sanity checks -- messages with
> > > > > # max_forwards==0, or excessively long requests
> > > > > if (!mf_process_maxfwd_header("10")) {
> > > > > sl_send_reply("483","Too Many Hops");
> > > > > break;
> > > > > };
> > > > > if ( msg:len > max_len ) {
> > > > > sl_send_reply("513", "Message too big");
> > > > > break;
> > > > > };
> > > > >
> > > > > # we record-route all messages -- to make sure that
> > > > > # subsequent messages will go through our proxy; that's
> > > > > # particularly good if upstream and downstream entities
> > > > > # use different transport protocol
> > > > > record_route();
> > > > > # loose-route processing
> > > > > if (loose_route()) {
> > > > > t_relay();
> > > > > break;
> > > > > };
> > > > >
> > > > > # if the request is for other domain use UsrLoc
> > > > > # (in case, it does not work, use the following command
> > > > > # with proper names and addresses in it)
> > > > > if (uri==myself) {
> > > > >
> > > > > if (method=="REGISTER") {
> > > > >
> > > > > # Uncomment this if you want to use digest authentication
> > > > > if (!radius_www_authorize("")) {
> > > > > www_challenge("", "1");
> > > > > break;
> > > > > };
> > > > >
> > > > > save("location");
> > > > > break;
> > > > > };
> > > > >
> > > > > # native SIP destinations are handled using our
> > > > > USRLOC DB if (!lookup("location")) {
> > > > > sl_send_reply("404", "Not Found");
> > > > > break;
> > > > > };
> > > > > };
> > > > > # forward to current uri now; use stateful forwarding; that
> > > > > # works reliably even if we forward from TCP to UDP
> > > > > if (!t_relay()) {
> > > > > sl_reply_error();
> > > > > };
> > > > >
> > > > > }
> > > > >
> > > > > _______________________________________________
> > > > > Serusers mailing list
> > > > > serusers at lists.iptel.org
> > > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > > > --
> > > > Please avoid sending me Word or PowerPoint attachments.
> > > > See http://www.fsf.org/philosophy/no-word-attachments.html
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> >
> > --
> > Please avoid sending me Word or PowerPoint attachments.
> > See http://www.fsf.org/philosophy/no-word-attachments.html
More information about the sr-users
mailing list