[Serusers] SER 0.9.0 adding users?

[Richard]

You need to modify serctl shell script. Just comment out anti_alias()
function. I don't understand why it was introduced and don't use alias in my
config either...


> -----Original Message-----
> From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] On
> Behalf Of Matt Schulte
> Sent: Wednesday, February 16, 2005 7:29 AM
> To: Jan Janak
> Cc: serusers at lists.iptel.org
> Subject: RE: [Serusers] SER 0.9.0 adding users?
> 
> Ok, I added the loadmod for domain, still same error. And no, no alias
> lookup.. I upgraded 'over' ser0.8.14, but made sure all the files were
> replaced properly.. thoughts?
> 
> -----Original Message-----
> From: Jan Janak [mailto:jan at iptel.org]
> Sent: Wednesday, February 16, 2005 11:19 AM
> To: Matt Schulte
> Cc: Felipe Martins; serusers at lists.iptel.org
> Subject: Re: [Serusers] SER 0.9.0 adding users?
> 
> 
> Did you load domain module ? Do you have lookup("alises") somewhere in
> your script ?
> 
>   Jan.
> 
> On 16-02 08:45, Matt Schulte wrote:
> > I still get errors, our sip provider requires a + anyway :-)
> >
> > I seem to get errors no matter what commands I run. Here's the latest
> > trying to add a "domain".
> >
> > ./serctl domain add blah.blah.net
> >
> > 500 command 'domain_reload' not available
> > Feb 16 09:43:36 brak /usr/local/sbin/ser[4315]: ERROR: fifo_server:
> > command domain_reload is not available
> >
> > Is there something that has to be done with the fifo_server before
> > doing all this?
> >
> > ser *is* running
> >
> > [serctl]
> > SER_FIFO=/tmp/ser_fifo
> >
> > [ser.cfg]
> > fifo="/tmp/ser_fifo"
> >
> >
> >
> > -----Original Message-----
> > From: Felipe Martins [mailto:fmartins at mundivox.com]
> > Sent: Wednesday, February 16, 2005 8:31 AM
> > To: serusers at lists.iptel.org
> > Subject: Re: [Serusers] SER 0.9.0 adding users?
> >
> >
> > Try
> >
> > # serctl add 18165551212 blahblah blah at blah
> >
> >
> >
> > On Wed, 16 Feb 2005 07:06:13 -0600
> > "Matt Schulte" <mschulte at netlogic.net> wrote:
> >
> > > I get this when adding a user in ser (using serctl)
> > >
> > > root at brak sbin]# ./serctl add +18165551212 blahblah blah at blah  MySql
> > > password:
> > >  error: 400; check if you use aliases in SER
> > >
> > > Um error 400?? I'm lost. no docs, frustrated. venting.
> > >
> > > 	Matt
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> > >
> >
> >
> > --
> >  Felipe Martins
> >  TEP Solution & New Technologies
> >  Mundivox Communications
> >  fmartins at mundivox.com
> >
> >  Site: www.mundivox.com
> >  Tel.: +55 +21 +3820 8839
> >  Cel.: +55 +21 +9823 8602
> >  Fax.: +55 +21 +3820 8844
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers