[Serusers] segmentation fault

sai latha sailatha_atp at yahoo.com
Wed Feb 16 13:56:15 CET 2005


Hi all

I am working on SER when configure ser.cfg and when
this using ./ser it shows the segmentation fault 

my configuration file is 

#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
#
# simple quick-start config script
#
                                                      
                      
# ----------- global configuration parameters
------------------------
                                                      
                      
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)
                                                      
                      
#Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
                                                      
                      
                                                      
                      
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
                                                      
                      
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
                                                      
                      
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
                                                      
                      
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters
---------------
                                                      
                      
# -- usrloc params --
                                                      
                      
modparam("usrloc", "db_mode",   0)
                                                      
                      
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
                                                      
                      
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
                                                      
                      
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
                                                      
                      
modparam("auth_radius", "service_type", 15)
                                                      
                      
# -------------------------  request routing logic
-------------------
                                                      
                      
# main routing logic
                                                      
                      
route{
                                                      
                      
        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long
requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
  };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too
big");
                break;
        };
                                                      
                      
        # we record-route all messages -- to make sure
that
        # subsequent messages will go through our
proxy; that's
        # particularly good if upstream and downstream
entities
        # use different transport protocol
        record_route();
        # loose-route processing
#       if (loose_route()) {
#               t_relay();
#               reak;
#       };
                                                      
                      
        # if the request is for other domain use
UsrLoc
        # (in case, it does not work, use the
following command
        # with proper names and addresses in it)
  if (uri==myself) {
                                                      
                      
                if (method=="REGISTER") {
                                                      
                      
# Uncomment this if you want to use digest
authentication
                        if (!radius_www_authorize(""))
{
                                www_challenge("",
"0");
                                break;
                        };
                                                      
                      
                                                      
                      
                save("location");
                        break;
                };
                                                      
                      
                                                      
                      
                # native SIP destinations are handled
using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not
Found");
                        break;
  };
        };
        # forward to current uri now; use stateful
forwarding; that
        # works reliably even if we forward from TCP
to UDP
        if (!t_relay()) {
                sl_reply_error();
        };
                                                      
                      
}
                                   
this is the ./ser file

 0(3682) DEBUG: init_mod: auth_radius
 0(3682) auth_radius - Initializing
Segmentation fault

please tell me the what is the problem where i have to
change  please tell me

Thank u
Sailatha


	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail




More information about the sr-users mailing list