[Serusers] Radius authentication problem

M.V. Jaga Mohan jagan at syringacommunications.com
Thu Feb 3 14:53:47 CET 2005


HI All
I am trying to configure SER with Freeradius. I have
downloaded SER-0.8.14 source and compiled with
radius_auth, Freeradius 0.9.1 and radiusclient library
0.4.2. Radius server is working fine. when i am trying
to run SER i am getting the following error :

0(7517) DEBUG: init_mod: auth_radius
 0(7517) auth_radius - Initializing
 0(7517) auth_radius: Error opening configuration file
 0(7517) init_mod(): Error while initializing module
auth_radius
ERROR: error while initializing modules

Just see the configuration file :



# ----------- global configuration parameters
------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)

#Uncomment these lines to enter debugging mode 
debug=9
fork=no
log_stderror=yes


check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading
----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters
---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")

#modparam("auth_radius", "service_type", 15);

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic
-------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy;
that's
	# particularly good if upstream and downstream
entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following
command
	# with proper names and addresses in it)
#	if (uri==myself) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest
authentication
			if (!radius_www_authorize("192.168.5.1")) {
				www_challenge("192.168.5.1","0");
				break;
			};

			save("location");
			break;
#		};

		# native SIP destinations are handled using our
USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	# forward to current uri now; use stateful
forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}




Please tell me what could be the problem.

Thanks in advance

Jagan


=====




More information about the sr-users mailing list