[Serusers] ser 0.8.14-4 and sems
ron
ron at silverbackasp.com
Tue Feb 8 17:20:02 CET 2005
Hi List,
I'm tryin to configure ser with sems, on a RedHat version 9.
I'm receiving this errors:
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command DB is not available
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server:n command must begin with ::
email_address
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with ::
subscriber
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must have at least
3 chars
Feb 9 01:36:00 sip Sems[4816]: Error: (AmSession.cpp)(startSession)(468): 404
voicemail: no email address for user <1002>
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command t_reply is not
available
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with ::
voicemail: no email address for user <1002>
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with ::
000012D07BAA2BC1
Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must have at least
3 chars
Feb 9 01:36:00 sip Sems[4816]: Error: (AmRequest.cpp)(reply)(335):
AmRequestUAS::reply: 500 command 't_reply' not available
Can anyone help me with this, thank you in advanced. I've attached my ser.cfg
and sems.conf below.
----- start of ser.cfg -----
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
listen=192.168.0.2
alias="sip.nhadzter.com"
alias="nhadzter.com"
alias="192.168.0.2"
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/vm.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ----------------- voicemail parameters ---------------
#modparam("voicemail", "db_url","/home/rco/cvs/ser/sip_router/modules/vm/db")
modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("voicemail", "email_column", "email_address")
modparam("voicemail", "subscriber_table", "subscriber")
modparam("voicemail", "user_column", "username")
modparam("voicemail", "domain_column", "domain")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("nhadzter.com", "subscriber")) {
www_challenge("nhadzter.com", "0");
break;
};
save("location");
break;
};
# Voicemail specific configuration - begin
if(method=="ACK" || method=="INVITE" || method=="BYE" ||
method=="REFER"){
if(t_newtran()){
t_reply("100","Trying -- just wait a minute !");
if(method=="INVITE" || method=="REFER"){
log("**************** vm start - begin
******************\n");
if( uri =~ "conference" ){
if(!vm("/tmp/am_fifo","conference")){
log("could not contact
conference server\n");
t_reply("500","could
not contact conference server");
};
}
else if( uri =~ "echo" ){
if(!vm("/tmp/am_fifo","echo")){
log("could not contact
echo\n");
t_reply("500","could
not contact echo");
};
}
else {
if(!vm("/tmp/am_fifo","voicemail")){
log("could not contact
voicemail\n");
t_reply("500","could
not contact voicemail");
};
};
log("**************** vm start - end
******************\n");
break;
};
if(method=="BYE"){
log("**************** vm end/refer -
begin ******************\n");
if(!vm("/tmp/am_fifo","bye")){
log("could not contact the
media server\n");
t_reply("500","could not
contact the media server");
};
log("**************** vm end/refer -
end ********************\n");
break;
};
}
else {
log("could not create new transaction\n");
sl_send_reply("500","could not create new
transaction");
};
};
# Voicemail specific configuration - end
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
------------- end of ser.cfg ------------------
---------start of sems.conf -----------------------
# $Id: sems.conf.sample,v 1.11.2.1 2004/01/27 15:08:28 rco Exp $
#
# sems.conf.sample
#
# Sip Express Media Server (sems)
#
# sample configuration file
#
#
# whitespaces (spaces and tabs) are ignored
# comments start with a "#" and may be used inline
#
# example: option=value1, value2 # i like this option
#
##################################
# global parameters #
##################################
# optional parameter: fork={yes|no}
#
# - specifies if sems should run in daemon mode (background)
# (fork=no is the same as -E)
fork=yes
# optional parameter: stderr={yes|no}
#
# - debug mode: do not fork and log to stderr
# (stderr=yes is the same as -E)
stderr=no
# optional parameter: loglevel={0|1|2|3}
#
# - sets log level (error=0, warning=1, info=2, debug=3)
# (same as -D)
loglevel=1
# optional parameter: fifo_name=<filename>
#
# - path and file name of our fifo file (same as -i)
fifo_name=/tmp/am_fifo
# optional parameter: ser_fifo_name=<filename>
#
# - path and file name of Ser's fifo file (same as -o)
ser_fifo_name=/tmp/ser_fifo
# optional parameter: plugin_path=<path>
#
# - sets the path to the plug-ins
# - may be absolute or relative to CWD
plugin_path=/usr/local/lib/sems/plug-in/
# optional parameter: smtp_server=<hostname>
#
# - sets address of smtp server
smtp_server=localhost
# optional parameter: smtp_port=<port>
#
# - sets port of smtp server
smtp_port=25
##################################
# module specific parameters #
##################################
# sample voicemail configuration (inline)
config.voicemail=inline
# optional parameter: announce_path=<path>
#
# - sets the path where announce files are searched for
# - the file to be played is determined the following way:
# <announce_path>/<domainname>/<username>.wav
# if this file is not available <announce_path>/<default_anounce> is used
announce_path=/usr/local/lib/sems/audio/
# parameter: default_announce=<filename>
#
# - sets the name of the default announce WAV file
default_announce=default_en.wav
# parameter: max_record_time=<seconds>
#
# - maximum record time
max_record_time=30
# parameter: accept_delay=<x>
#
# - delays accepting of the call for x seconds
# - default value is 0
accept_delay=20
# end of configuration section
# for voicemail module
config.voicemail=end
# sample announcement configuration (inline)
config.announcement=inline
# optional parameter: announce_path=<path>
#
# - sets the path where announce files are searched for
announce_path=/usr/local/lib/sems/audio/
# parameter: default_announce=<filename>
#
# - sets the name of the default announce WAV file
default_announce=default_en.wav
# end of configuration section for announcement module
config.announcement=end
# sample isdngw module configuration (external file)
# config.isdngw=/etc/isdngw.conf
# sample ivr module configuration (inline)
config.ivr=inline
#parameter: python_script_path=<full path>
python_script_path=/etc/ivr
#parameter: python_script_file=<filename>
python_script_file=example.py
# end of configuration section for ivr module
config.ivr=end
# sample conference configuration (inline)
config.conference=inline
# parameter: default_announce=<filename>
#
# - sets the full pathed name of the default announce WAV file.
# Will be played to lonely users.
default_announce=/usr/local/lib/sems/audio/first_participant.wav
# end of configuration section for conference module
config.conference=end
# example configuration for number reader
config.number_reader=inline
number_path=/usr/local/lib/sems/audio/
prolog_file=welcome_to_number_reader.wav
epilog_file=thanks_calling_number_reader.wav
# end of number_reader configuration
config.number_reader=end
# add more module configurations here (inline or external):
#
# config.mymodule=<filename>
# or
# config.mymodule=inline
# ...
# config.mymodule=end
------------- end of sems.conf -------------------
-- --
iTouch Communications, Inc.
More information about the sr-users
mailing list