[Serusers] Changing Sip Port

Voipers Portugal voipers at gmail.com
Sat Dec 10 14:48:02 CET 2005


Most softphones allow that. When you are specifying a SIP server, for
default (normally) it uses 5060. If you want to alter this port just do the
following:

ser_IP_address:port_number

127.0.0.1:5090

Jose Simoes

p.s. this works with X-Lite

On 12/5/05, Andrey Kouprianov <andrey.kouprianov at gmail.com> wrote:
>
> I guess it depends on your softphone... if it chooses to communicate
> from port 5060, there's nothing you can do about it, unless you can
> change it in the phone's settings...
> Some softphones, for instance, get a random port...
>
> On 12/5/05, sagar <vids_cs at yahoo.com> wrote:
> >  Hi All,
> >
> >  I am using ser 0.8.14 +asterisk B2bua.
> >
> >  Currently  softphone is registering on standard sip port 5060  .
> >  Is it possibe to use any other port  like 5090 or 8069
> >
> >
> >  I tried to do so by changing the listining port to 5090 in ser.cfg but
> in
> > case the softphone is not getting register.
> >
> >
> >  Here is the ser log
> >
> >
> >  0(11348) SIP Request:
> >   0(11348)  method:  <REGISTER>
> >   0(11348)  uri:     <sip:192.168.1.100>
> >   0(11348)  version: <SIP/2.0>
> >   0(11348) parse_headers: flags=1
> >   0(11348) end of header reached, state=5
> >   0(11348) parse_headers: Via found, flags=1
> >   0(11348) parse_headers: this is the first via
> >   0(11348) After parse_msg...
> >   0(11348) preparing to run routing scripts...
> >   0(11348) DEBUG : is_maxfwd_present: searchi ng for max_forwards header
> >   0(11348) parse_headers: flags=128
> >   0(11348) DEBUG: is_maxfwd_present: value = 70
> >   0(11348) parse_headers: flags=8
> >   0(11348) DEBUG: add_param:
> > tag=fa37b062306344d68023aed26289e820
> >   0(11348) DEBUG: add_param: epid=f657995ecc
> >   0(11348) end of header reached, state=29
> >   0(11348) parse_headers: flags=256
> >   0(11348) end of header reached, state=9
> >   0(11348) DEBUG: get_hdr_field: <To> [37];
> > uri=[sip:2851816416 at 192.168.1.100:5090]
> >   0(11348) DEBUG: to body [<sip:2851816416 at 192.168.1.100:5090>
> >  ]
> >   0(11348) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
> >   0(11348) DEBUG: get_hdr_body : content_length=0
> >   0(11348) found end of header
> >   0(11348) find_first_route(): No Route headers found
> >   0(11348) loose_route(): There is no Route HF
> >   0(11348) parse_headers: flags=64
> >   0(11348) parse_headers: flags=64
> >   0(11348) parse_headers: flags=33554432
> >   0(11348) check_self - checking if host==us: 13==13 &&  [192.168.1.100]
> ==
> > [192.168.1.100]
> >   0(11348) check_self - checking if port 5090 matches port 5060
> >   0(11348) check_self: host != me
> >   0(11348) DEBUG: t_addifnew: msg id=1 , global msg id=0 , T on
> > entrance=0xffffffff
> >   0(11348) parse_headers: flags=-1
> >   0(11348) parse_headers: flags=60
> >   0(11348) t_lookup_request: start searching: hash=58712, isACK=0
> >   0(11348) DEBUG: proceeding to pre-RFC3261 transaction matching
> >   0(11348) DEBUG: t_lookup_request: no transaction found
> >   0(11348) DEBUG: mk_proxy: doing DNS lookup...
> >   0(11348) check_via_address(192.168.1.2, 192.168.1.2, 0)
> >   0(11348) DEBUG: add_to_tail_of_timer[4]: 0xb6165fe8
> >   0(11348) DEBUG: add_to_tail_of_timer[0]: 0xb6165ffc
> >   0(11348) SER: new transacti on fwd'ed
> >   0(11348) DEBUG:destroy_avp_list: destroing list (nil)
> >   0(11348) receive_msg: cleaning up
> >
> >  Please advise.
> >
> >  Thanks In Advance.
> >
> >
> >  ________________________________
> >  Yahoo! Personals
> >  Single? There's someone we'd like you to meet.
> >  Lots of someones, actually. Yahoo! Personals
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
> >
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20051210/de46ec8a/attachment.htm>


More information about the sr-users mailing list