[Serusers] Web registration problem through ser_fifo

[Cesc]

I do not remember the fifo command interface by heart ... but i would
recommend you to take a look at the source code related to the fifo, i
am sure you can infere the command structure. Take a look in the tm
module ... uac_fifo.c, for example, and go from there.

Cesc

On 12/6/05, Andrey Kouprianov <andrey.kouprianov at gmail.com> wrote:
> What is wrong with my PHP code, I have no idea. Could you please check
> it and let me know what's wrong. Im using SER 0.9.3, but ser_fifo
> documentation is not available, so i used one from ser 0.8.12 (admin
> guide). Im sure there's a little error, but I can figure out which
> one. Btw, below the code is the output from message log
>
> <?
>
> /* config values */
> $domain="sip.mydomain.org";
> $user="webme";
> $web_aor="sip:".$user."@".$domain;
> $expires=3600;
> $type="student";
> $fifo="/tmp/ser_fifo";
>
> /* open reply fifo */
> $replyfilename="webfifo_".rand();
> $replypath="/tmp/".$replyfilename;
>
> echo "Initiating your request...<p>";
>
> /* open fifo now */
> $fifo_handle=fopen( $fifo, "w" );
> if (!$fifo_handle) {
>    exit ("Sorry -- cannot open fifo: ".$fifo);
> }
>
> /* construct FIFO command */
> $fifo_cmd=":ul_add:".$replyfilename."\n".
>                "location\n".                                   //table
>                $web_aor."\n".                          //aor
>                "sip:".$user."@".$_SERVER['REMOTE_ADDR']."\n".  //contact
>                $expires."\n".                          //expires
>                "0.00\n".                       //priority
>                "0\n\n";
>
> /* create fifo for replies */
> system("mkfifo -m 666 ".$replypath );
>
> /* write fifo command */
> if (fwrite( $fifo_handle, $fifo_cmd)==-1) {
>    unlink($replypath);
>    fclose($fifo_handle);
>    exit("Sorry -- fifo writing error");
> }
> fclose($fifo_handle);
>
> /* read output now */
> if (readfile( $replypath )==-1) {
>    unlink($replypath);
>        exit("Sorry -- fifo reading error");
> }
> unlink($replypath);
> echo "<p>You are now signed in<p>";
>
> ?>
>
>
> ///MESSAGE LOG
> Dec  6 16:35:24 sip /usr/local/sbin/ser[206]: ERROR: read_line:
> request  line too long
> Dec  6 16:35:24 sip /usr/local/sbin/ser[206]: ERROR: ul_add: flags expected
> Dec  6 16:35:24 sip /usr/local/sbin/ser[206]: ERROR: fifo_server:
> command must begin with :: location
> Dec  6 16:35:24 sip /usr/local/sbin/ser[206]: ERROR: fifo_server:
> command must begin with :: sip:webme at 203.159.32.50;type=student
> Dec  6 16:35:24 sip /usr/local/sbin/ser[206]: ERROR: fifo_server:
> command must begin with :: 0.00
> Dec  6 16:35:54 sip /usr/local/sbin/ser[206]: ERROR: ul_add: flags expected
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>