[Users] Serial forking Help!!
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Mon Dec 5 18:48:27 CET 2005
Hi Matteo,
you do not need the append_branch in failure_route; next_contact()
automatically adds the contacts as branches.
regards,
bogdan
Matteo Piazza wrote:
> Hi Bogdan,
> Thank's for the help,
>
> Now I have insert a next_contacts() in the principal route and the
> serial forking now works.
> But i have this error:
> ERROR:tm:t_should_relay_response: status rewrite by UAS: stored: 408,
> received: 100
>
> route{
> ..........
> .........
> if(load_contacts()){
> xlog("L_ERR","LOAD CONTACTS!\n");
> }
>
> if(next_contacts()){
> xlog("L_ERR","CONTACT <$ru> !\n");
> }
> t_on_failure("1");
> t_relay();
> exit;
> }
>
>
> failure_route[1] {
> if (next_contacts())
> {
> xlog("L_ERR","NEXT CONTACT <$ru> !\n");
> append_branch();
> t_relay();
> }
> exit;
> }
>
> ===============================
> Debug output:
> ===============================
>
> LOAD CONTACTS!
> 6(14458) CONTACT <sip:309 at 192.168.9.137;transport=udp> !
> 14(14474) NEXT CONTACT <sip:309 at 192.168.9.137;transport=udp> !
> 9(14464) LOAD CONTACTS!
> 9(14464) CONTACT <sip:400 at 192.168.9.193> !
> 7(14460) ERROR:tm:t_should_relay_response: status rewrite by UAS:
> stored: 408, received: 100
> 7(14460) WARNING: set_timer called on a "detached" timer -- ignoring:
> 0xb5dbd72c
>
>
> Bogdan-Andrei Iancu wrote:
>
>> Hi Matteo,
>>
>> you are missing a next_contacts() after load_contacts().
>>
>> regards,
>> bogdan
>>
>>
>> Matteo Piazza wrote:
>>
>>> I become crazy to realize a serial forking.
>>> I try to use load_contacts() and next_contscts().
>>>
>>> This is my openser.cfg nd my location table:
>>> In teory when I call 309 at 192.168.9.98 the location with the q value
>>> equal to 0.80 it is the first but it is processed only the location
>>> 309 at 192.168.9.131.
>>>
>>> Help!!!
>>>
>>> #
>>> # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
>>> #
>>> # simple quick-start config script
>>> #
>>>
>>> # ----------- global configuration parameters ------------------------
>>>
>>>
>>> debug=3 # debug level (cmd line: -dddddddddd)
>>> fork=yes
>>> log_stderror=yes # (cmd line: -E)
>>>
>>> /* Uncomment these lines to enter debugging mode
>>> fork=no
>>> log_stderror=yes
>>> */
>>>
>>> check_via=no # (cmd. line: -v)
>>> dns=no # (cmd. line: -r)
>>> rev_dns=no # (cmd. line: -R)
>>> port=5060
>>> children=4
>>> fifo="/tmp/openser_fifo"
>>>
>>> #
>>> # uncomment the following lines for TLS support
>>> #disable_tls = 0
>>> #listen = tls:your_IP:5061
>>> #tls_verify = 1
>>> #tls_require_certificate = 0
>>> #tls_method = TLSv1
>>> #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
>>> #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
>>> #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
>>>
>>> # ------------------ module loading ----------------------------------
>>>
>>> # Uncomment this if you want to use SQL database
>>> loadmodule "/usr/local/lib/openser/modules/mysql.so"
>>>
>>> loadmodule "/usr/local/lib/openser/modules/sl.so"
>>> loadmodule "/usr/local/lib/openser/modules/tm.so"
>>> loadmodule "/usr/local/lib/openser/modules/rr.so"
>>> loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
>>> loadmodule "/usr/local/lib/openser/modules/usrloc.so"
>>> loadmodule "/usr/local/lib/openser/modules/registrar.so"
>>> loadmodule "/usr/local/lib/openser/modules/textops.so"
>>> loadmodule "/usr/local/lib/openser/modules/avpops.so"
>>> loadmodule "/usr/local/lib/openser/modules/xlog.so"
>>> loadmodule "/usr/local/lib/openser/modules/lcr.so"
>>>
>>>
>>> # Uncomment this if you want digest authentication
>>> # mysql.so must be loaded !
>>> loadmodule "/usr/local/lib/openser/modules/auth.so"
>>> loadmodule "/usr/local/lib/openser/modules/auth_db.so"
>>>
>>> # ----------------- setting module-specific parameters ---------------
>>>
>>> # -- usrloc params --
>>> modparam("registrar", "append_branches", 1)
>>> #modparam("usrloc", "db_mode", 0)
>>>
>>> # Uncomment this if you want to use SQL database
>>> # for persistent storage and comment the previous line
>>> modparam("usrloc", "db_mode", 2)
>>>
>>> # -- auth params --
>>> # Uncomment if you are using auth module
>>> #
>>> modparam("auth_db", "calculate_ha1", yes)
>>> #
>>> # If you set "calculate_ha1" parameter to yes (which true in this
>>> config),
>>> # uncomment also the following parameter)
>>> #
>>> modparam("auth_db", "password_column", "password")
>>>
>>> # -- rr params --
>>> # add value to ;lr param to make some broken UAs happy
>>> modparam("rr", "enable_full_lr", 1)
>>>
>>>
>>>
>>> modparam("usrloc","db_url","mysql://openser:heslo@127.0.0.1/openser")
>>> modparam("auth_db","db_url","mysql://openser:heslo@127.0.0.1/openser")
>>> modparam("lcr","db_url","mysql://openser:heslo@127.0.0.1/openser")
>>> modparam("avpops","avp_url","mysql://openser:heslo@127.0.0.1/openser")
>>> modparam("avpops","avp_table","usr_preferences")
>>>
>>>
>>>
>>> modparam("tm", "fr_timer", 8)
>>> modparam("tm", "fr_inv_timer", 10)
>>> modparam("tm", "wt_timer", 5)
>>>
>>> #modparam("avpops","avp_aliases","fwdbusy=i:665")
>>>
>>>
>>>
>>>
>>>
>>> # ------------------------- request routing logic -------------------
>>>
>>> # main routing logic
>>>
>>> route{
>>>
>>> # initial sanity checks -- messages with
>>> # max_forwards==0, or excessively long requests
>>> if (!mf_process_maxfwd_header("10")) {
>>> sl_send_reply("483","Too Many Hops");
>>> exit;
>>> };
>>>
>>> if (msg:len >= 2048 ) {
>>> sl_send_reply("513", "Message too big");
>>> exit;
>>> };
>>>
>>> if (method =="INVITE" && uri =~"^sip:0[0-9]*@*"){
>>> log(1, "Check 1 Start PSTN Call\n");
>>> rewritehostport("192.168.9.97:5061");
>>> t_relay();
>>> exit;
>>> }
>>>
>>> if (method == "CANCEL"){
>>> t_relay();
>>> }
>>>
>>> if (method =="BYE"){
>>> t_relay();
>>> }
>>> # we record-route all messages -- to make sure that
>>> # subsequent messages will go through our proxy; that's
>>> # particularly good if upstream and downstream entities
>>> # use different transport protocol
>>> if (!method=="REGISTER")
>>> record_route();
>>>
>>> # subsequent messages withing a dialog should take the
>>> # path determined by record-routing
>>> if (loose_route()) {
>>> # mark routing logic in request
>>> append_hf("P-hint: rr-enforced\r\n");
>>> route(1);
>>> };
>>>
>>> if (!uri==myself) {
>>> # mark routing logic in request
>>> append_hf("P-hint: outbound\r\n");
>>> # if you have some interdomain connections via TLS
>>> #if(uri=~"@tls_domain1.net") {
>>> # t_relay_to_tls("IP_domain1","port_domain1");
>>> # exit;
>>> #} else if(uri=~"@tls_domain2.net") {
>>> # t_relay_to_tls("IP_domain2","port_domain2");
>>> # exit;
>>> #}
>>> route(1);
>>> };
>>>
>>> # if the request is for other domain use UsrLoc
>>> # (in case, it does not work, use the following command
>>> # with proper names and addresses in it)
>>> if (uri==myself) {
>>>
>>> if (method=="REGISTER") {
>>>
>>> # Uncomment this if you want to use digest authentication
>>> if (!www_authorize("create-net.it", "subscriber")) {
>>> www_challenge("create-net.it", "0");
>>> exit;
>>> };
>>>
>>> save("location");
>>> exit;
>>> };
>>>
>>> lookup("aliases");
>>> if (!uri==myself) {
>>> append_hf("P-hint: outbound alias\r\n");
>>> route(1);
>>> };
>>>
>>> # native SIP destinations are handled using our USRLOC DB
>>> if (!lookup("location")) {
>>> sl_send_reply("404", "Not Found");
>>> exit;
>>> };
>>> append_hf("P-hint: usrloc applied\r\n");
>>> };
>>>
>>> if(load_contacts()){
>>> xlog("L_ERR","LOAD CONTACTS!\n");
>>> }
>>> xlog("L_ERR","CONTACT <$ru> !\n");
>>> t_on_failure("1");
>>> t_relay();
>>> #route(1);
>>> }
>>>
>>>
>>> route[1] {
>>> # send it out now; use stateful forwarding as it works reliably
>>> # even for UDP2TCP
>>> if (!t_relay()) {
>>> sl_reply_error();
>>> };
>>> exit;
>>> }
>>>
>>> failure_route[1] {
>>>
>>> if (next_contacts()) {
>>> xlog("L_ERR","NEXT CONTACT <$ru> !\n");
>>> append_branch();
>>> t_relay();
>>> }
>>>
>>> else {
>>> xlog("L_ERR","ERROR!\n");
>>> }
>>> }
>>>
>>> This is my location table
>>> ============================================================
>>>
>>> username | domain | contact | q
>>> 400 | | sip:400 at 192.168.9.193 | 1.00
>>> 308 | | sip:308 at 192.168.9.181:5060 | 1.00
>>> 309 | | sip:309 at 192.168.9.131;transport=udp | 1.00
>>> 309 | | sip:400 at 192.168.9.97 | 0.80
>>>
>>>
>>>
>>>
>>
>
>
More information about the sr-users
mailing list