[Serusers] 1 SER & 2 Providers
Juan Priotti
jpriotti at gmail.com
Sat Aug 27 18:28:31 CEST 2005
Just add the DID's provided as alias of the user:
serctl alias add <DID 1st provider> <customer's uri>
serctl alias add <DID 2nd provider> <customer's uri>
and calls made to bith DID's will be routed to the same customer.
----- Original Message -----
From: Ozan Blotter
To: serusers at lists.iptel.org
Sent: Saturday, August 27, 2005 4:04 AM
Subject: [Serusers] 1 SER & 2 Providers
Dear List,
Assume that there are two different service providers and one SER in middle of them. A client needs to use/connect SER but also he/she has accounts in both providers and both supplied him/her DDIs (landline phone). Now again assume that client registers both of phones into SER. But still he/she wants to receive calls from both providers, is it possible to receive calls from different providers to that client and/or how to i setup ?
In current SER.CFG below, i only setup one prefix which is "0", but i can change it to any and/or add many prefixes, ex: 0049 (germany), 001 (usa), 0044 (uk), 0090 (turkey) to Provider 1 and 0033 (france), 0038 (italy) to Provider 2 and so on.
debug=3
fork=yes
log_stderror=no
listen=212.XXX.104.XXX # This is SER's Public IP
port=5060
children=4
alias=212.XXX.104.XXX # This is SER's Public IP
dns=no
rev_dns=no
fifo="/tmp/openser_fifo"
fifo_db_url="mysql://openser:openserrw@localhost/openser"
loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/auth.so"
loadmodule "/usr/local/lib/openser/modules/auth_db.so"
loadmodule "/usr/local/lib/openser/modules/uri.so"
loadmodule "/usr/local/lib/openser/modules/uri_db.so"
loadmodule "/usr/local/lib/openser/modules/mediaproxy.so"
loadmodule "/usr/local/lib/openser/modules/nathelper.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
loadmodule "/usr/local/lib/openser/modules/domain.so"
loadmodule "/usr/local/lib/openser/modules/acc.so"
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "use_domain", 1)
modparam("domain", "db_mode", 1)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "natping_interval", 180)
modparam("mediaproxy","natping_interval", 30)
modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock")
modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-asymmetric-clients")
modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-asymmetric-clients")
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", 1)
modparam("registrar", "default_expires", 60)
modparam("registrar", "min_expires", 30)
modparam("registrar", "nat_flag", 6)
modparam("registrar", "use_domain", 1)
modparam("rr", "enable_full_lr", 1)
modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("acc", "failed_transactions", 1)
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "db_flag", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section and Acc section
# -----------------------------------------------------------------
if (method=="INVITE" && client_nat_test("3")) {
record_route_preset("212.XXX.104.XXX:5060;nat=yes"); # This is SER's Public IP
} else if (method!="REGISTER") {
if!(uri=~"^sip:833[0-9]*@") { # I do not want to make accounting if clients' prefix is beginning with 833
record_route();
setflag(1);
}
};
# -----------------------------------------------------------------
# Call Tear Down Section
# -----------------------------------------------------------------
if (method=="BYE" || method=="CANCEL") {
end_media_session();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
if (has_totag() && (method=="INVITE" || method=="ACK")) {
if (client_nat_test("3") || search("^Route:.*;nat=yes")) {
setflag(6);
use_media_proxy();
};
};
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="CANCEL") {
route(3);
break;
} else if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
};
route(1);
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
t_on_reply("1");
if (!t_relay()) {
if (method=="INVITE" || method=="ACK") {
end_media_session();
};
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
if (!search("^Contact:\ +\*") && client_nat_test("7")) {
setflag(6);
fix_nated_register();
force_rport();
};
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# CANCEL and INVITE Message Handler
# -----------------------------------------------------------------
if (client_nat_test("3")) {
setflag(7);
force_rport();
fix_nated_contact();
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (uri=~"^sip:0[0-9]*@*") { # If calling number is beginning with prefix 0, route it to PSTN
rewritehost("195.XXX.122.XXX"); # This is PSTN Gateway's Public IP
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
if (method=="CANCEL") {
route(1);
break;
};
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
if (isflagset(6) || isflagset(7)) {
use_media_proxy();
};
route(1);
}
onreply_route[1] {
if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) {
if (!search("^Content-Length:\ +0")) {
use_media_proxy();
};
};
if (client_nat_test("1")) {
fix_nated_contact();
};
}
------------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050827/bc38f393/attachment.htm>
More information about the sr-users
mailing list