SV: SV: [Serusers] Using IPCB.net for terminatin traffic with SER

[Roger Lewau]

Ok, I got one step closer to solving this issue. It seems that the
references to regex.h in ipcb_auth_adapter.c and md5.h and md5global.h in
sip_md5.c needs to be updated in order for the module to compile under
FreeBSD. It seems Linux OS make use a different includes than FreeBSD. I did
the following to compile the module under freebsd

In ipcb_auth_adapter.c changed 
#include <regex.h> to #include <gnu/regex.h>

In sip_md5.c changed 
#include "md5.h" to #include "../../md5.h" 
#include "md5global.h" to #include "../../md5global.h"

Then did
gmake modules=modules/ipcb_auth_adapter modules

This successfully compiles the module under FreeBSD. BUT!!! When loading it
into ser I get the the following error:

 0(88218) ERROR: load_module: could not open module
</usr/local/lib/ser/modules/ipcb_auth_adapter.so>:
/usr/local/lib/ser/modules/ipcb_auth_adapter.so: Undefined symbol
"re_compile_pattern"

I think is because ser is compiled with a different regex.h but the error
still occurs when compiling with the same regex.h as the module.

It seems strange to me that gmake does not use the gnu includes instead of
the make includes by default. Instead of changing the source files it should
be possible to set which sets och include files that should be used during
compile. Anybody who knows how to do that?

Kind regards
Roger



-----Ursprungligt meddelande-----
Från: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] För
Roger Lewau
Skickat: den 13 augusti 2005 21:20
Till: 'Iqbal'; jan at iptel.org
Kopia: serusers at lists.iptel.org
Ämne: SV: SV: [Serusers] Using IPCB.net for terminatin traffic with SER

Hello again,

Fired up my WMWare Workstation and created a virtual Fedora4 installation
and tried to compile the module. And Ofcourse this worked. Seems this is
more of a FreeBSD compile issue. I will look further to solve this issue.

Kind regards
Roger

-----Ursprungligt meddelande-----
Från: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] För
Roger Lewau
Skickat: den 13 augusti 2005 17:17
Till: 'Iqbal'; jan at iptel.org
Kopia: serusers at lists.iptel.org
Ämne: SV: SV: [Serusers] Using IPCB.net for terminatin traffic with SER

Hello,

Well, my problem is that I can not compile it at all... See below
transcript... 
The module version I use is unknown/unstated (files are from 2004), my ser
is 0.9.3 and my OS is FreeBSD 5.4 Release. Are you using the same setup?

Kind regards
Roger
-----Ursprungligt meddelande-----
Från: Iqbal [mailto:iqbal at gigo.co.uk]
Skickat: den 13 augusti 2005 14:53
Till: roger.lewau at serverhallen.com; jan at iptel.org
Kopia: serusers at lists.iptel.org
Ämne: Re: SV: [Serusers] Using IPCB.net for terminatin traffic with SER


Hi

The module does work, I used it to send traffic to ipcb. what version u got

Iqbal
On 8/13/2005, "Roger Lewau" <roger.lewau at serverhallen.com> wrote:

>Hello Jan,
>
>I got it from their helpdesk when I told them I use SER.
>
>Sure no problem, I send it to you directly instead of to the list.
>
>Kind regards
>Roger
>
>-----Ursprungligt meddelande-----
>Från: Jan Janak [mailto:jan at iptel.org]
>Skickat: den 13 augusti 2005 00:11
>Till: Roger Lewau
>Kopia: serusers at lists.iptel.org
>Ämne: Re: [Serusers] Using IPCB.net for terminatin traffic with SER
>
>Where did you get the module from ? Could you send it to me ?
>
>  Jan.
>
>On 12-08-2005 22:49, Roger Lewau wrote:
>> Hello, I signed up with IPCB to terminate international traffic. 
>> I tried compiling their module ipcb_auth_adapter under FreeBSD 5.4 
>> using the following syntax
>>  
>> gmake modules=modules/ipcb_auth_adapter modules
>>  
>> But all I got is a lot of errors (see below) and the module wont 
>> compile. Is some one else using IPCB for termination traffic from 
>> their
>SER?
>>  
>> gmake[1]: Entering directory `/root/ser-0.9.3/modules/ipcb_auth_adapter'
>> ../../Makefile.rules:80: sip_md5.d: No such file or directory
>> sip_md5.c:11:23: md5global.h: No such file or directory gcc -fPIC 
>> -DPIC -g -O9 -funroll-loops  -Wcast-align  -Wall 
>> -minline-all-stringops -malign-double -falign-loops -mtune=athlon
-Wmain
>> -Wimplicit -Wmissing-braces     -DNAME='"ser"' -DVERSION='"0.9.3"'
>> -DARCH='"i386"' -DOS='"freebsd"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386 
>> -D__OS_freebsd -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC 
>> -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP 
>> -DDISABLE_NAGLE -DFAST_LOCK -DADAPTIVE_WAIT
>> -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_SOCKADDR_SA_LEN
>> -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD 
>> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_CONNECT_ECONNRESET_BUG -c 
>> ipcb_auth_adapter.c -o ipcb_auth_adapter.o
>> ipcb_auth_adapter.c:96: error: variable `nonce_regex' has initializer 
>> but incomplete type
>> ipcb_auth_adapter.c:97: error: variable `realm_regex' has initializer 
>> but incomplete type
>> ipcb_auth_adapter.c:98: error: variable `to_user_regex' has 
>> initializer but incomplete type
>> ipcb_auth_adapter.c: In function `on_load':
>> ipcb_auth_adapter.c:126: error: syntax error before "old_syntax"
>> ipcb_auth_adapter.c:137: error: `old_syntax' undeclared (first use in 
>> this
>> function)
>> ipcb_auth_adapter.c:137: error: (Each undeclared identifier is 
>> reported only once
>> ipcb_auth_adapter.c:137: error: for each function it appears in.)
>> ipcb_auth_adapter.c:137: warning: implicit declaration of function 
>> `re_set_syntax'
>> ipcb_auth_adapter.c:137: error: `RE_SYNTAX_EGREP' undeclared (first 
>> use in this function)
>> ipcb_auth_adapter.c:139: warning: implicit declaration of function 
>> `re_compile_pattern'
>> ipcb_auth_adapter.c:145: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c:145: error: `REGS_FIXED' undeclared (first use in 
>> this
>> function)
>> ipcb_auth_adapter.c:146: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c:147: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c: In function `on_unload':
>> ipcb_auth_adapter.c:156: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c:157: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c:158: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c: In function `remove_hf':
>> ipcb_auth_adapter.c:359: warning: implicit declaration of function 
>> `del_lump'
>> ipcb_auth_adapter.c: In function `extract_first_group':
>> ipcb_auth_adapter.c:373: error: variable `match' has initializer but 
>> incomplete type
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: error: storage size of 'match' isn't known
>> ipcb_auth_adapter.c:378: warning: implicit declaration of function 
>> `re_search'
>> ipcb_auth_adapter.c:373: warning: unused variable `match'
>> ipcb_auth_adapter.c: At top level:
>> ipcb_auth_adapter.c:96: error: storage size of `nonce_regex' isn't 
>> known
>> ipcb_auth_adapter.c:97: error: storage size of `realm_regex' isn't 
>> known
>> ipcb_auth_adapter.c:98: error: storage size of `to_user_regex' isn't 
>> known
>> gmake[1]: *** [ipcb_auth_adapter.o] Error 1
>> gmake[1]: Leaving directory
>> `/root/ser-0.9.3/modules/ipcb_auth_adapter
>>  
>>  
>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers