SV: SV: [Serusers] Using IPCB.net for terminatin traffic with SER

[Roger Lewau]

Hello,

Well, my problem is that I can not compile it at all... See below
transcript... 
The module version I use is unknown/unstated (files are from 2004), my ser
is 0.9.3 and my OS is FreeBSD 5.4 Release. Are you using the same setup?

Kind regards
Roger
-----Ursprungligt meddelande-----
Från: Iqbal [mailto:iqbal at gigo.co.uk] 
Skickat: den 13 augusti 2005 14:53
Till: roger.lewau at serverhallen.com; jan at iptel.org
Kopia: serusers at lists.iptel.org
Ämne: Re: SV: [Serusers] Using IPCB.net for terminatin traffic with SER


Hi

The module does work, I used it to send traffic to ipcb. what version u got

Iqbal
On 8/13/2005, "Roger Lewau" <roger.lewau at serverhallen.com> wrote:

>Hello Jan,
>
>I got it from their helpdesk when I told them I use SER.
>
>Sure no problem, I send it to you directly instead of to the list.
>
>Kind regards
>Roger
>
>-----Ursprungligt meddelande-----
>Från: Jan Janak [mailto:jan at iptel.org]
>Skickat: den 13 augusti 2005 00:11
>Till: Roger Lewau
>Kopia: serusers at lists.iptel.org
>Ämne: Re: [Serusers] Using IPCB.net for terminatin traffic with SER
>
>Where did you get the module from ? Could you send it to me ?
>
>  Jan.
>
>On 12-08-2005 22:49, Roger Lewau wrote:
>> Hello, I signed up with IPCB to terminate international traffic. 
>> I tried compiling their module ipcb_auth_adapter under FreeBSD 5.4 
>> using the following syntax
>>  
>> gmake modules=modules/ipcb_auth_adapter modules
>>  
>> But all I got is a lot of errors (see below) and the module wont 
>> compile. Is some one else using IPCB for termination traffic from 
>> their
>SER?
>>  
>> gmake[1]: Entering directory `/root/ser-0.9.3/modules/ipcb_auth_adapter'
>> ../../Makefile.rules:80: sip_md5.d: No such file or directory
>> sip_md5.c:11:23: md5global.h: No such file or directory gcc -fPIC 
>> -DPIC -g -O9 -funroll-loops  -Wcast-align  -Wall
>> -minline-all-stringops -malign-double -falign-loops -mtune=athlon
-Wmain
>> -Wimplicit -Wmissing-braces     -DNAME='"ser"' -DVERSION='"0.9.3"'
>> -DARCH='"i386"' -DOS='"freebsd"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386 
>> -D__OS_freebsd -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC 
>> -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP 
>> -DDISABLE_NAGLE -DFAST_LOCK -DADAPTIVE_WAIT 
>> -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_SOCKADDR_SA_LEN 
>> -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD 
>> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_CONNECT_ECONNRESET_BUG -c 
>> ipcb_auth_adapter.c -o ipcb_auth_adapter.o
>> ipcb_auth_adapter.c:96: error: variable `nonce_regex' has initializer 
>> but incomplete type
>> ipcb_auth_adapter.c:97: error: variable `realm_regex' has initializer 
>> but incomplete type
>> ipcb_auth_adapter.c:98: error: variable `to_user_regex' has 
>> initializer but incomplete type
>> ipcb_auth_adapter.c: In function `on_load':
>> ipcb_auth_adapter.c:126: error: syntax error before "old_syntax"
>> ipcb_auth_adapter.c:137: error: `old_syntax' undeclared (first use in 
>> this
>> function)
>> ipcb_auth_adapter.c:137: error: (Each undeclared identifier is 
>> reported only once
>> ipcb_auth_adapter.c:137: error: for each function it appears in.)
>> ipcb_auth_adapter.c:137: warning: implicit declaration of function 
>> `re_set_syntax'
>> ipcb_auth_adapter.c:137: error: `RE_SYNTAX_EGREP' undeclared (first 
>> use in this function)
>> ipcb_auth_adapter.c:139: warning: implicit declaration of function 
>> `re_compile_pattern'
>> ipcb_auth_adapter.c:145: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c:145: error: `REGS_FIXED' undeclared (first use in 
>> this
>> function)
>> ipcb_auth_adapter.c:146: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c:147: error: invalid use of undefined type `struct 
>> re_pattern_buffer'
>> ipcb_auth_adapter.c: In function `on_unload':
>> ipcb_auth_adapter.c:156: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c:157: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c:158: warning: passing arg 1 of `regfree' from 
>> incompatible pointer type
>> ipcb_auth_adapter.c: In function `remove_hf':
>> ipcb_auth_adapter.c:359: warning: implicit declaration of function 
>> `del_lump'
>> ipcb_auth_adapter.c: In function `extract_first_group':
>> ipcb_auth_adapter.c:373: error: variable `match' has initializer but 
>> incomplete type
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: warning: excess elements in struct 
>> initializer
>> ipcb_auth_adapter.c:373: warning: (near initialization for `match')
>> ipcb_auth_adapter.c:373: error: storage size of 'match' isn't known
>> ipcb_auth_adapter.c:378: warning: implicit declaration of function 
>> `re_search'
>> ipcb_auth_adapter.c:373: warning: unused variable `match'
>> ipcb_auth_adapter.c: At top level:
>> ipcb_auth_adapter.c:96: error: storage size of `nonce_regex' isn't 
>> known
>> ipcb_auth_adapter.c:97: error: storage size of `realm_regex' isn't 
>> known
>> ipcb_auth_adapter.c:98: error: storage size of `to_user_regex' isn't 
>> known
>> gmake[1]: *** [ipcb_auth_adapter.o] Error 1
>> gmake[1]: Leaving directory 
>> `/root/ser-0.9.3/modules/ipcb_auth_adapter
>>  
>>  
>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>