[Serusers] fix_socket_list: could not rev. resolve .....

[Ashutosh Kumar]

Hi,
      SER cannot listen on private IP addresses, the listen address should
be the public address of the interface on which SER is running. The
address(es) should not be 127.* or 192.*
To eliminate this problem, use either of the two simple approaches;

1. EITHER use the command line “ser –l xxx.xxx.xxx.xxx” where
xxx.xxx.xxx.xxx is the public ip of the machine 
2. OR, insert the line “listen= xxx.xxx.xxx.xxx” on top variable
declarations sections of your ser.cfg file. This approach is a better one. 

Hope that helps.

Regards,
Ashutosh

________________________________________
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] On
Behalf Of Linh Pham
Sent: Tuesday, August 09, 2005 8:13 AM
To: serusers at lists.iptel.org
Subject: [Serusers] fix_socket_list: could not rev. resolve .....

Hi I'm new to Linux and SER so bear with me :)

Yesterday I installed FC4 and SER (tar.gz). SER runs OK and I was able to
capture some packets with Ethereal. However, this morning SER is not
working. I didn't change anything in the config file. The line
'fifo=/tmp/ser_fifo' still in the config file.
What should I do to make SER run again? And please explain what
'Segmentation fault' in ser -c means. Thank you.

[root at localhost /]# ser -c
 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10
 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10
Listening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 192.168.1.10 [192.168.1.10]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 192.168.1.10 [192.168.1.10]:5060
Aliases:
             tcp: localhost:5060
             tcp: localhost.localdomain:5060
             udp: localhost:5060
             udp: localhost.localdomain:5060

config file ok, exiting...
Segmentation fault
[root at localhost /]# uname -a
Linux localhost.localdomain 2.6.11-1.1369_FC4smp #1 SMP Thu Jun 2 23:08:39
EDT 2005 i686 i686 i386 GNU/Linux
[root at localhost /]# serctl ps
Error opening ser's FIFO /tmp/ser_fifo
Make sure you have line fifo=/tmp/ser_fifo in your config
[root at localhost /]#


var/log/messages:

Aug  9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:04:44 localhost ser[4815]: Maxfwd module- initializing
Aug  9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:05:46 localhost ser[4847]: Maxfwd module- initializing
Aug  9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:08:06 localhost ser[4881]: Maxfwd module- initializing
Aug  9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev.
resolve 192.168.1.10
Aug  9 09:08:09 localhost ser[4884]: Maxfwd module- initializing


-- 
Best regards,

Linh Pham

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Ashutosh Kumar.vcf
Type: text/x-vcard
Size: 422 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050809/f8a062d5/attachment.vcf>