[Serusers] lookup 2 uri

[Richard Z]

The issue is that the locationis not always the same. I will try to
fool around the register message and save function to see if there is
a way to make it work.

Richard


On 8/3/05, Samuel Osorio Calvo <samuel.osorio at nl.thalesgroup.com> wrote:
> If you know in advance the IP of 1002 and it is static, you can use serctl to add it's contact. This way doing a lookup("location") for 1003 will return both contacts...it's not a nice solution but it whould work.
> 
> Samuel.
> 
> Unclassified.
> >>> Richard Z <rzheng at gmail.com> 08/03/05 08:55PM >>>
> Hi Samuel,
> 
> That's a very good detailed explanation! That's exactly what happened.
> In my existing config, I have the logic to deal with the second ring
> to 1003 at test.com. It forks to itself and creates another ser
> transaction. I'd like to make it simpler by doing it in a single
> transaction.
> 
> One way I am thinking about, but haven't tried yet, is when 1003
> registers, ser adds its location to both 1002 and 1003. So when ser
> does lookup("location") for 1002, the real location for 1003 shows up.
> Not sure that it is feasible.
> 
> Thanks,
> Richard
> 
> 
> 
> On 8/2/05, Samuel Osorio Calvo <samuel.osorio at nl.thalesgroup.com> wrote:
> > Just one remark: only one of the two URI will be translated to the contact.
> >
> > I'll try to explain...
> >
> > imagine the incoming Req-URI is 1001 at test.com. When it passes the first lookup,
> >             lookup("aliases");
> > SER will retrieve the two aliases and put one of them as the new req-uri and the other as branch.
> >   Req-URI: 1002 at test.com
> >   branch: 1003 at test.com
> > Doing the second lookup,
> >             lookup("location");
> > will put the contact of 1002 at test.com as Req-URI (if more than one contact is present, the subsequent bindings will be added as branches) and the 1003 at test.com will be left as branch untouched.
> >   Req-URI:  1002 at 10.1.1.102
> >   branch: 1003 at test.com
> > This happens because lookup() only takes as input the req-URI.
> >
> > The result is that SER makes a DNS query for test.com, to send the request to 1003 at test.com, instead of the end-point. If the DNS is properly configured, test.com should point to SER itself, making SER sending the message to itself via the network. Depending on the config file, it can work but you should check the logs to see what is exactly happening.
> > User 1002 will get the message without any problem.
> >
> > NOTE: depending on the order in the database, 1003 and 1002 can exchange roles in upper explanation.
> >
> > As SER is now coded, above can not be changed (as far as I know)....
> >
> > Hope it helps,
> >
> > Samuel.
> >
> > Unclassified.
> >
> > >>> "Zeus Ng" <zeus.ng at isquare.com.au> 08/03/05 01:51AM >>>
> > You would need two steps here, looup("aliases"), then lookup("location").
> >
> > Zeus
> >
> > > -----Original Message-----
> > > From: serusers-bounces at lists.iptel.org
> > > [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Richard Z
> > > Sent: Wednesday, 3 August 2005 3:33 AM
> > > To: Atle Samuelsen
> > > Cc: serusers at lists.iptel.org
> > > Subject: Re: [Serusers] lookup 2 uri
> > >
> > >
> > > Hi Atle,
> > >
> > > Alias doesn't replace uri with its real location. I'd like to use
> > > lookup("location") to find out its real location. For
> > > example, if 102 at test.com is at 102 at 10.1.1.102 and
> > > 103 at test.com is at 103 at 10.1.1.103. I'd like to replace all
> > > uris with 102 at 10.1.1.102 and 103 at 10.1.1.103 in a single ser
> > > transaction  logic. Would it be possible?
> > >
> > > Thanks,
> > > Richard
> > >
> > >
> > > On 8/1/05, Atle Samuelsen <clona at camaro.no> wrote:
> > > >
> > > > Hi,
> > > >
> > > > you could do something like :
> > > >
> > > > serctl alias add 101 sip:102 at test.com
> > > > serctl alias add 101 sip:103 at test.com
> > > >
> > > > This way the invite would be forked to both 102 and 103,
> > > >
> > > > just remember to have both lookup("aliases"); and
> > > save("aliases"); in
> > > > your config at the right spot :-)
> > > >
> > > > -Atle
> > > >
> > > >
> > > >
> > > > * Richard Z <rzheng at gmail.com> [050802 04:34]:
> > > > > Hi,
> > > > >
> > > > > I am trying to implement a feature to ring two ip phones
> > > > > simultaneously. For example, when I call 101 at test.com, it
> > > rings both
> > > > > 101 at test.com and 102 at test.com. In this case, the ruri is
> > > > > 101 at test.com. I can use append_branch 102 at test.com, but
> > > is there a
> > > > > way to lookup the locations of both 101 and 102?
> > > > >
> > > > > Thanks,
> > > > > Richard
> > > > >
> > > > > _______________________________________________
> > > > > Serusers mailing list
> > > > > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> > > > >
> > > >
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> > >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>