[Users] openser :

[Bogdan-Andrei Iancu]

Hi Sunil,

That's because of the OPTIONS which has no username part in RURI.  The 
AOR  (Address of Record) built by REGISTRAR module to perform lookup 
looks a little bit broken (starts with "@" :( ). I will fix this problem.

The OPTIONS request you get may be a UA ping to keep the NAT bind open - 
it will be better to check them from the script and to prevent them to 
hit usrloc (since the RURI just points to the server with no username, 
so it's not resolvable).

regards,
Bogdan

share phone wrote:

> Hi All,
>  
>  lookup(): '@192.168.1.66' <mailto:%27 at 192.168.1.66%27> Not found in 
> usrloc
>  
> my SIP_DOMAIN was sharephone.networks.com and my IP Address is 
> 192.168.1.66 and i added the FQDN in the /etc/hosts file and when i 
> use the UA to register it registers but after a while i get the 
> folloing message in the log.
>  
> Thanks,
> Sunil.
>  
>  
>  
>  
> 2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) lookup(): '@192.168.1.66' <mailto:%27 at 192.168.1.66%27> Not 
> found in usrloc
>  2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) lookup(): '@192.168.1.66' <mailto:%27 at 192.168.1.66%27> Not 
> found in usrloc
>  2(14038) parse_headers: flags=ffffffffffffffff
>  2(14038) check_via_address(192.168.1.65, 192.168.1.65, 0)
>  2(14038) DEBUG:destroy_avp_list: destroying list (nil)
>  2(14038) receive_msg: cleaning up
>  2(14038) SIP Request:
>  2(14038)  method:  <OPTIONS>
>  2(14038)  uri:     <sip:192.168.1.66:5060>
>  2(14038)  version: <SIP/2.0>
>  2(14038) parse_headers: flags=2
>  2(14038) Found param type 235, <rport> = <n/a>; state=6
>  2(14038) Found param type 232, <branch> = 
> <z9hG4bKc0a801410000000b430a4e92000005dd000005ec>; state=16
>  2(14038) end of header reached, state=5
>  2(14038) parse_headers: Via found, flags=2
>  2(14038) parse_headers: this is the first via
>  2(14038) After parse_msg...
>  2(14038) preparing to run routing scripts...
>  2(14038) parse_headers: flags=100
>  2(14038) DEBUG: get_hdr_body : content_length=0
>  2(14038) get_hdr_field: cseq <CSeq>: <456> <OPTIONS>
>  2(14038) DEBUG:maxfwd:is_maxfwd_present: value = 70
>  2(14038) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16
>  2(14038) DEBUG: add_param: tag=286578432823134
>  2(14038) end of header reached, state=29
>  2(14038) parse_headers: flags=200
>  2(14038) end of header reached, state=9
>  2(14038) DEBUG: get_hdr_field: <To> [25]; uri=[sip:192.168.1.66:5060]
>  2(14038) DEBUG: to body [<sip:192.168.1.66:5060>
> ]
>  2(14038) found end of header
>  2(14038) find_first_route: No Route headers found
>  2(14038) loose_route: There is no Route HF
>  2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) lookup(): '@192.168.1.66' <mailto:%27 at 192.168.1.66%27> Not 
> found in usrloc
>  2(14038) grep_sock_info - checking if host==us: 12==12 &&  
> [192.168.1.66] == [192.168.1.66]
>  2(14038) grep_sock_info - checking if port 5060 matches port 5060
>  2(14038) lookup(): '@192.168.1.66' <mailto:%27 at 192.168.1.66%27> Not 
> found in usrloc
>  2(14038) parse_headers: flags=ffffffffffffffff
>  2(14038) check_via_address(192.168.1.65, 192.168.1.65, 0)
>  2(14038) DEBUG:destroy_avp_list: destroying list (nil)
>  2(14038) receive_msg: cleaning up
>
>  
>
> ------------------------------------------------------------------------
> Start your day with Yahoo! - make it your home page 
> <http://us.rd.yahoo.com/evt=34442/*http://www.yahoo.com/r/hs>
>
> ------------------------------------------------------------------------
> Start your day with Yahoo! - make it your home page 
> <http://us.rd.yahoo.com/evt=34442/*http://www.yahoo.com/r/hs>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>  
>