[Serusers] Call Accouting

[Iqbal]

Hi

remove the setflags, from all sections
Then make a log entry into that loop, and see in debig if u r getting
into that loop.

In the INVITE section write setflag(1);

at the start of ur script uncomment

#modparam("acc", "log_flag", 2)

to read

modparam("acc", "log_flag", 1)  <----------------- this '1' should
match the number in ur setflag statement above

Iqbal



On 4/28/2005, "Leon Sun" <leon.sun at keywestcommunications.com> wrote:

>Ipbal,
>
>I really appreciate your kind help. Here is my cfg file. I tried different
>way to get records in Acc table without luck while mysql user auth works
>fine. Please advice.
>
>Thank you.
>
>
>
># ----------- global configuration parameters ------------------------
>
>#debug=3         # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no        # (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode
>debug=7
>fork=no
>log_stderror=yes
>*/
>
>check_via=no    # (cmd. line: -v)
>dns=no           # (cmd. line: -r)
>rev_dns=no      # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>
>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>loadmodule "/usr/local/lib/ser/modules/sl.so"
>loadmodule "/usr/local/lib/ser/modules/tm.so"
>loadmodule "/usr/local/lib/ser/modules/rr.so"
>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
>loadmodule "/usr/local/lib/ser/modules/acc.so"
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>
>loadmodule "/usr/local/lib/ser/modules/auth.so"
>loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
># ------------- tm parameters
>
>modparam("tm", "fr_timer", 12)
>modparam("tm", "fr_inv_timer", 24)
>
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode",   0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this config),
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- acc params --
>modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
>modparam("acc", "early_media", 1)
>modparam("acc", "db_flag", 1)
>modparam("acc", "db_missed_flag",3)
>#modparam("acc", "log_fmt", "mfdiortspc")
>modparam("acc", "log_level",1)
>#modparam("acc", "log_flag", 2)
>##modparam("acc", "log_missed_flag", 3)
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># -------------------------  request routing logic -------------------
>
># main routing logic
>
>route{
>
>        # initial sanity checks -- messages with
>        # max_forwards==0, or excessively long requests
>        if (!mf_process_maxfwd_header("10")) {
>                sl_send_reply("483","Too Many Hops");
>                break;
>        };
>        if ( msg:len > max_len ) {
>                sl_send_reply("513", "Message too big");
>                break;
>        };
>
>        # we record-route all messages -- to make sure that
>        # subsequent messages will go through our proxy; that's
>        # particularly good if upstream and downstream entities
>        # use different transport protocol
>        record_route();
>        # loose-route processing
>        if (loose_route()) {
>                t_relay();
>                break;
>        };
>        if (method=="INVITE") {
>
>                        setflag(1);setflag(2);setflag(3);
>        };
>        lookup("aliases");
>        setflag(1);
>        setflag(2);
>        setflag(3);
>        # if the request is for other domain use UsrLoc
>        # (in case, it does not work, use the following command
>        # with proper names and addresses in it)
>        if (uri==myself) {
>                        if (method=="INVITE") {
>                                if (uri=~"^sip:1"|| uri=~"^sip:011")
>{setflag(1);setflag(2);setflag(3);
>                                        forward(165.208.155.192,5060);break;
>                                        };
>
>
>                        };
>                if (method=="REGISTER") {
>
># Uncomment this if you want to use digest authentication
>                        if (!www_authorize("sip.my.com", "subscriber")) {
>                                www_challenge("sip.my.com", "0");
>
>                                break;
>                        };
>
>                        save("location");
>                        break;
>                };
>
>                # native SIP destinations are handled using our USRLOC DB
>                if (!lookup("location")) {
>                        sl_send_reply("404", "Not Found");
>                        break;
>                };
>        };
>        # forward to current uri now; use stateful forwarding; that
>        # works reliably even if we forward from TCP to UDP
>
>        if (!t_relay()) {
>                sl_reply_error();
>        };
>
>}
>
>
>
>