[Serusers] ACC into mysql

[Edgardo O. Gonzales II]

Hi all!

Im also receiving this error message.

Can somebody help us on how to make accounting work using mysql.

thanks,
ed

At 06:01 AM 4/26/2005, Leon Sun wrote:
>Hi,
>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql 
>followed instruction from manual. I found, first, "modparam("acc", 
>"db_url", "sql://ser:heslo@localhost/ser")" coudnlt work at all in 
>ser.cfg. If I enabled in cfg file, it showed  "Starting ser: ERROR: bad 
>config file (1 errors)"
>
>If I disabled it, SER worked fine but I couldn't see any record in 'acc' 
>table.
>
>Would anyone suggest how to put call records into Mysql?
>
>Thank you.
>
>
>
># ----------- global configuration parameters ------------------------
>
>#debug=3         # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no        # (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode
>debug=7
>fork=no
>log_stderror=yes
>*/
>
>check_via=no    # (cmd. line: -v)
>dns=no           # (cmd. line: -r)
>rev_dns=no      # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/lib/ser/modules/acc.so"
>loadmodule "/usr/lib/ser/modules/sl.so"
>loadmodule "/usr/lib/ser/modules/tm.so"
>loadmodule "/usr/lib/ser/modules/rr.so"
>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/lib/ser/modules/usrloc.so"
>loadmodule "/usr/lib/ser/modules/registrar.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/lib/ser/modules/auth.so"
>loadmodule "/usr/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
>
>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode",   0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this config),
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
>
>modparam("acc","log_level",1)
>modparam("acc","log_flag",1)
># -------------------------  request routing logic -------------------
>
># main routing logic
>
>route{
>
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if ( msg:len > max_len ) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
>
>         # we record-route all messages -- to make sure that
>         # subsequent messages will go through our proxy; that's
>         # particularly good if upstream and downstream entities
>         # use different transport protocol
>         record_route();
>         # loose-route processing
>         if (loose_route()) {
>                 if (method=="BYE") {
>                    setflag(1);
>                    setflag(2);
>                 }
>
>                 t_relay();
>
>                 break;
>         };
>
>         #labeled all transaction for accounting
>         setflag(1);
>         setflag(2);
>
>         if (method=="CANCEL"){
>                                 t_relay();
>                             };
>
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
>
>
>         if (uri==myself) {
>
>                         # This for PSTN destination
>
>                         if (uri=~"^sip:1")
>
>                         {       rewritehost("10.10.10.10");
>                                 forward(10.10.10.10,5060);
>                                 break;
>                         }
>                 if (method=="REGISTER") {
>
>                 # Uncomment this if you want to use digest authentication
>                         if (!www_authorize("sip.mycommunications.com", 
> "subscriber")) {
>                                 www_challenge("sip.mycommunications.com", 
> "0");
>                                 break;
>                         };
>
>                         save("location");
>                         break;
>                 };
>
>                 # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
>         };
>         # forward to current uri now; use stateful forwarding; that
>         # works reliably even if we forward from TCP to UDP
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
>
>}
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050426/795c67bd/attachment.htm>