[Serusers] HELP Needed! SER Crashes.

[IpTel List]

But it works with sample config file ... It crashes only when I'm trying to
enable auth-modules ...

So, maybe there are some troubles with them? Does anyone use 0.8.14 version?

I'm using slackware linux ...

Is any solution with it?


----- Original Message ----- 
From: "Edgardo O. Gonzales II" <edgardo.g at pacific.net.ph>
To: "Aleksandr N/A" <iptellist at mail.ru>; <serusers at lists.iptel.org>
Sent: Thursday, April 21, 2005 4:14 PM
Subject: Re: [Serusers] HELP Needed! SER Crashes.


>
> try to enable debug mode or define your pid dir during startup.
>
>
> At 08:18 PM 4/21/2005, Aleksandr N/A wrote:
> >Hi!
> >
> >I have some problems with SER 0.8.14. When I'm trying AUTH modules, it
> >crashes. (it says:
> >
>
>---------------------------------------------------------------------------
------------------------
> >
> >Starting SER : cat: /var/run/ser.pid: No such file or directory
> >started pid()
> >
>
>---------------------------------------------------------------------------
------------------------
> >
> >  My config is the following:
> >
> >#
> ># $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
> >#
> ># simple quick-start config script
> >#
> >
> ># ----------- global configuration parameters ------------------------
> >
> >#debug=3         # debug level (cmd line: -dddddddddd)
> >#fork=yes
> >#log_stderror=no # (cmd line: -E)
> >
> >/* Uncomment these lines to enter debugging mode
> >debug=7
> >fork=no
> >log_stderror=yes
> >*/
> >
> >check_via=no # (cmd. line: -v)
> >dns=no           # (cmd. line: -r)
> >rev_dns=no      # (cmd. line: -R)
> >#port=5060
> >#children=4
> >fifo="/tmp/ser_fifo"
> >
> ># ------------------ module loading ----------------------------------
> >
> ># Uncomment this if you want to use SQL database
> >loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> >loadmodule "/usr/local/lib/ser/modules/sl.so"
> >loadmodule "/usr/local/lib/ser/modules/tm.so"
> >loadmodule "/usr/local/lib/ser/modules/rr.so"
> >loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> >loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> >loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> ># Uncomment this if you want digest authentication
> ># mysql.so must be loaded !
> >loadmodule "/usr/local/lib/ser/modules/auth.so"
> >loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> ># ----------------- setting module-specific parameters ---------------
> >
> ># -- usrloc params --
> >
> >#modparam("usrloc", "db_mode",   0)
> >
> ># Uncomment this if you want to use SQL database
> ># for persistent storage and comment the previous line
> >modparam("usrloc", "db_mode", 2)
> >
> ># -- auth params --
> ># Uncomment if you are using auth module
> >#
> >modparam("auth_db", "calculate_ha1", yes)
> >#
> ># If you set "calculate_ha1" parameter to yes (which true in this
config),
> ># uncomment also the following parameter)
> >#
> >modparam("auth_db", "password_column", "password")
> >
> ># -- rr params --
> ># add value to ;lr param to make some broken UAs happy
> >modparam("rr", "enable_full_lr", 1)
> >
> ># -------------------------  request routing logic -------------------
> >
> ># main routing logic
> >
> >route{
> >
> >  # initial sanity checks -- messages with
> >  # max_forwards==0, or excessively long requests
> >  if (!mf_process_maxfwd_header("10")) {
> >   sl_send_reply("483","Too Many Hops");
> >   break;
> >  };
> >  if (len_gt( max_len )) {
> >   sl_send_reply("513", "Message too big");
> >   break;
> >  };
> >
> >  # we record-route all messages -- to make sure that
> >  # subsequent messages will go through our proxy; that's
> >  # particularly good if upstream and downstream entities
> >  # use different transport protocol
> >  record_route();
> >  # loose-route processing
> >  if (loose_route()) {
> >   t_relay();
> >   break;
> >  };
> >
> >  # if the request is for other domain use UsrLoc
> >  # (in case, it does not work, use the following command
> >  # with proper names and addresses in it)
> >  if (uri==myself) {
> >
> >   if (method=="REGISTER") {
> >
> ># Uncomment this if you want to use digest authentication
> >    if (!www_authorize("ignosya.dyndns.org", "subscriber")) {
> >     www_challenge("ignosya.dyndns.org", "0");
> >     break;
> >    };
> >
> >    save("location");
> >    break;
> >   };
> >
> >   # native SIP destinations are handled using our USRLOC DB
> >   if (!lookup("location")) {
> >    sl_send_reply("404", "Not Found");
> >    break;
> >   };
> >  };
> >  # forward to current uri now; use stateful forwarding; that
> >  # works reliably even if we forward from TCP to UDP
> >  if (!t_relay()) {
> >   sl_reply_error();
> >  };
> >
> >}
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
>